Reviews Cutting Blade

Sew Easy ER4185 Ruler Cutter

  • Sew Easy Ruler Cutter 4 1/2 Inches x 13 1/2 Inches. The Sew Easy Ruler Cutter is perfect for sewing, patchwork and papercraft..
  • Powerful Cutting. The cutter takes a standard 45mm rotary blade and will cut up to Fabric - 6 thickness..
  • 13 1/2 Inch Length. The longer length enables cutting the entire width of a standard patchwork fabric bolt. Clear Markings. Featuring easy to read measurements at 1/8 Inch, 1/4 inch, 1/2 inch, and 1 inch increments with 30, 45. and60 degree angles..
  • Safety Cutting. When the cutting action is finished the blade retracts automatically into the carriage. In the lock position, the blade is fully secured..
  • Fixed Cutting Depth. The ruler cutter system limits the cutting depth guarding against deep cuts into the cutting mat and reduces wear on the cutting blade. Quick Change Blade. The blade is quick and easy to replace without screws and springs..
Check Stock

Tube Expanding Pliers, Aluminum Alloy Expanding Tool, for Home Gardening Household Appliances

  • Bearing Blade: Bearing blade, high hardened and multi wear incisive blade, can cut iron pipe, incisive and durable, small cutting crack..
  • Multi Bearing Grip Wheel Design: Multi bearing grip wheel design, 6 bearings evenly distributed, good grip balance to ensure fluent cutting without running knife..
  • Unique Ball Bearing Structure Design: Unique ball bearing structure design, cutting more energy saving. Strong toughness, rust resistance, aging resistance and fall resistance..
Check Stock

Size 40/30/10/7FC/5FC/4FC/3FC Detachable Pet Dog Grooming Clipper Ceramic Blades Set,Compatible with Andis,Oster A5,Wahl KM10 Series Clippers,Cut Length 1/100"(0.25mm) to 1/2"(13mm),7 Pack

  • ▶【SIZE】:40# Blade Cutting length 1/100 In（0.25mm）,30# Blade Cutting length 1/50 In（0.5mm）,10# Blade Cutting length 1/16 In（1.5mm）,7FC Blade Cutting length 1/8 In（3.2mm）,5FC Blade Cutting length 1/4 In（6.3mm）,4FC Blade Cutting length 3/8 In（9.5mm）,3-3/4FC Blade Cutting length 1/2 In（13mm）.
  • ▶【Model】:Compatible with Andis UltraEdge/CeramicEdge series,for Andis model detachable blade clippers:AG, AGC, AGP, AGRC, AGCL, AGR Plus, AGRV, DBLC, MBG, SMC,Versa and Most Oster A5 and most detachable-A5 type clippers and Wahl KM Series.
  • ▶【Materials】:Comb blade 440C Stainless-steel,Shear blade Titanium-coating Ceramic,Blade sharp and strong hardness, water will not rust. It is more heat resistant than traditional carbon steel process and has less noise when used.
  • ▶【Profession Technology】:The blade adopts the latest powder metallurgy technology and ceramic sintering process.
  • ▶【CUSTORM SUPPORTS】:If blade set that you purchase fails to fit your machine, please contact customer service and we will reply within 24 hours, we will arrange free o....
Check Stock

Premium Alloy Steel Brush Cutter Blade - 10in Chainsaw Tooth Blade with Holes for Cutting Replacement of Weed Eater Trimmer - Ultra-Sharp 80T Blade Design

  • Veratile Bruh Cutter Blade: Cut through weed and hrub with eae uing our high-quality alloy teel blade. Deigned for profeional ue, it i tenioned and tempered to minimize vibration during ue.
  • Convenient Chainaw Tooth Blade: Our cutting replacement blade feature a powerful cutting edge that i perfect for ue on dene gra and weed. Eay to operate and replace, it' a practical acceory for any weed eater or bruh cutter.
  • Durable Alloy teel Blade: Made of high-quality alloy teel, thi weed eater blade i built to lat. Reitant to breaking and damage, it provide -lating performance even in challenging condition.
  • Heavy-Duty Cutting Replacement Blade: Keep your bruh cutter in top condition with our reliable and efficient cutting replacement blade. Deigned to meet your weeding need, it' imple, eay to ue, and highly effective.
  • High-Performance Weed Eater Blade: Take on even the et cutting tak with our profeional-quality weed eater blade. With each tooth providing a powerful cutting edge, it i ideal for cutting hard weed and hrub, making it a mut-have acceory for any bruh cutter..
Check Stock

TOOLEAGUE 4.5\ Diamond Saw Blade, Diamond Cutting Wheel for Cutting Concrete Stone, Granite, Brick, Masonry, Broadened Cutter Head,Sharp and Durable 5 Pcs(Blue)

  • HIGH DENSITY MATERIAL: TOOLEAGUE diamond saw blade adopts the latest technology, high density alloy raw material greatly improves the sharpness and durability of the saw blade..
  • HOT PRESSING TECHNOLOGY: Diamond saw blade adopts hot pressing technology, high quality base material, faster cutting speed, stable performance and low amplitude when the product is running at high speed. No deformation..
  • SPECIAL TECHNOLOGY: granite saw blade unique tooth guard widening blade technology, segment height 12mm, widening blade greatly enhance the life of the product, Arbor 7/8"-5/8". Size is 4.5 "x.070 "x.395"..
  • WET & DRY: 4 1/2 Inch Diamond Blade for Angle Grinder, suitable for both dry and wet cutting, sharp for dry cutting and durable for wet cutting..
  • WIDE RANGE OF CUTTING: The saw blade is not only efficient and stable in cutting, but also widely applicable to provide fast and smooth cutting in brick, sidewalk, concrete, granite, quarry and other stones..
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

Makita XBP03Z 18V LXT Lithium-Ion Cordless Compact Band Saw Tool Only

  • 2-1/2" Cutting capacity is ideal for cutting Conduit, unistrut, copper pipe, threaded rod, angle iron and channel.
  • Makita-built motor delivers 630 ft. /min. Blade speed for faster cutting.
  • Wheel cover encloses the blade outside the cutting area making the saw suitable for one-handed operation per ANSI standard 60745-2-20.
  • Aluminum blade housing for increased durability.
  • Exterior blade adjustment provides more accurate blade tracking for increased cutting performance.
Check Stock

Norpro 6516 Ultimate Seafood Shears 7.5 x 3 x .5 Red

  • The perfect tool to cut through hard shellfish. Ideal for crab legs, lobsters, crawfish, shrimp and scampis..
  • Insert cutting blade into one extremity and start cutting towards you. For cutting lobster tails, start at the end of the tail and start cutting....
  • Use Integrated grips to remove small claw. Insert cutting blade into opening. Start cutting towards you from top opening of claw. Reposition blade....
  • Use bottom blade to scoop out meat from shell..
  • Grips can also be used to open small bottle lids..
Check Stock

EZARC 5 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】 EZARC 5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:5 Inch.
  • ★【Reliable Safety】This 5 Inch diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

Andis – 64071 Ultra Edge Dog Clipper Blade – Constructed of Carbonized Steel Resists Heat & Rust with Long-Lasting Sharp Edges

  • CONSTRUCTION: High-quality carbonized steel is used in the construction of the Ultra-Edges blade, extending the blade's edge life.
  • The blades are extremely heat and rust-resistant..
  • HIGH RESISTANCE: The chrome-finished, heat- and rust-resistant close-cutting blade offer animals a cooler, more comfortable cutting experience.
  • They won't experience any pain or harm when getting their hair cut..
  • ULTRA EDGE: The UltraEdge blades undergo a special hardening process for a longer blade life, extending the period they can be used.
  • CUTTING LENGTH: The clipper blade is extremely cutting.
  • The thick and lengthy hairs on the pet's feet, pads, face, ears, and tail can be easily removed by using this size-10 blade and a 1/16-inch cutting length..
  • COMPATIBLE: The dog clipper blade is compatible with the Andis AG, AGC, AGP, AGRC, AGCL, AGR Plus, AGRV, DBLC, MBG, and SMC detachable blade clippers.
  • It also works with the Oster A5 and Wahl KM series..
Check Stock