Reviews Currie Rear Track Bar Tj

Jeep OE COR-1100111 Track Bar Bolt Kit Compatible with Jeep 1984-2006 TJ/LJ/XJ/ZJ

  • Gold Zinc Plated For Corrosion Resistance.
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock

JEEP TJ REAR FRAME COIL SPRING BRACKETS

  • Our Jeep Wrangler TJ heavy duty rear frame coil spring brackets are direct replacements for your factory mounts..
  • If you have rusted brackets, damaged brackets, or are looking to use TJ coil springs on your next project this is the bracket you need..
  • This coil spring mount is designed to go in the same location as your factory bracket..
  • The brackets are manufactured from 1/4" steel, shipped bare, welding required, and are sold in pairs..
  • Applications: 1997-2006 Jeep TJ Wrangler.
Check Stock

Superlift Suspension |5070| Adjustable Front Track Bar - Jeep 1984-2001 XJ/1993-1998 ZJ/1997-2006 TJ with 3.5\-4.5\ Lift

  • This is an adjustable front track bar for the front of a Kit for 84-01 XJ, 93-98 ZJ or 97-06 TJ.
  • Helps to locate and stabilize the body/frame, in relation to the axle housing.
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.
  • Access to the best customer support in the industry.
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • ...4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geometry. They will accept the stock 55-57 Chevy ball joints & steering arms. *Wilwood Disc Brake Kit With 12" Rotors And Red Calipers (Wilwood Part #140-12306-R Front And # 140-7140-R Rear)..
Check Stock

GEARFLAG Neoprene Seat Cover Custom fits Wrangler TJ 1997-2002 Full Set (Front + Rear Seats) (Red/Black)

  • CR-Grade 3mm Neoprene (Same as wet suit material), waterproof, dirt-proof, snow-proof, sand-proof. Instant fresh look for the Wrangler TJ old seats and spice up your TJ interior. We don't do cheap foam padding, because neoprene must fit like a glove to your seats..
  • Custom fits Wrangler TJ 2-doors Model year: 1997-2002.
  • Full set TJ seat cover includes: 2 Front Seat Covers + 1 Rear Bench Seat Cover. All hand made for it's best quality.
  • No more hot seat in summer and cold seat in winter. GEARFLAG neoprene seat cover can prevent hot seat surface under sun exposure and cold seat surface in freezing winter. It is a good alternative to leather or PU seat cover. Side cutout for levers (Most of TJ models have side lever on the upper seat).
  • Map pocket on the front seat covers back. All hand made for it's best quality. Metal clips on elastic straps to hook under the seat for keeping in place and snug fit..
Check Stock

GEARFLAG Neoprene Seat Cover Custom fits Wrangler TJ 1997-02 Full Set (Front + Rear Set) (Gray/Black)

  • CR-Grade 3mm Neoprene (Same as wet suit material), waterproof, dirt-proof, snow-proof, sand-proof. Instant fresh look for the Wrangler TJ old seats and spice up your TJ interior. We don't do cheap foam padding, because neoprene must fit like a glove to your seats..
  • Custom fits Wrangler TJ 2-doors Model year: 1997-2002.
  • Full set TJ seat cover includes: 2 Front Seat Covers + 1 Rear Bench Seat Cover. All hand made for it's best quality.
  • No more hot seat in summer and cold seat in winter. GEARFLAG neoprene seat cover can prevent hot seat surface under sun exposure and cold seat surface in freezing winter. It is a good alternative to leather or PU seat cover. Side cutout for levers (Most of TJ models have side lever on the upper seat).
  • Map pocket on the front seat covers back. All hand made for it's best quality. Metal clips on elastic straps to hook under the seat for keeping in place and snug fit..
Check Stock

GEARFLAG Custom Fit Neoprene Seat Cover for Wrangler TJ 1997-2002 (Front + Rear Seats) (Safari Khaki)

  • CR-Grade 3mm Neoprene (Same as wet suit material), waterproof, dirt-proof, snow-proof, sand-proof. Instant fresh look for the Wrangler TJ old seats and spice up your TJ interior. We don't do cheap foam padding, because neoprene must fit like a glove to your seats..
  • Custom fits Wrangler TJ 2-doors Model year: 1997-2002. Full set TJ seat cover includes: 2 Front Seat Covers + 1 Rear Bench Seat Cover..
  • Khaki Safari Style. Rare to find color. All hand made for it's best quality.
  • No more hot seat in summer and cold seat in winter. GEARFLAG neoprene seat cover can prevent hot seat surface under sun exposure and cold seat surface in freezing winter. It is a good alternative to leather or PU seat cover. Side cutout for levers (Most of TJ models have side lever on the upper seat).
  • Map pocket on the front seat covers back. All hand made for it's best quality. Metal clips on elastic straps to hook under the seat for keeping in place and snug fit..
Check Stock

RISTOW Upgraded Jeep Grab Handles, 4 x Roll Bar Paracord Grab Handles for Jeep Wrangler YJ TJ JK JL & Gladiator JT 1987-2021, Red

  • SIZE REQUIREMENT: RISTOW Roll bar Grab Handles are perfect fit for 1.5 to 3 inches non-padded roll bars of Jeep Wrangler JL JLU JK JKU TJ YJ LJ & Gladiator JT 1987-2021. It is not fit for roll bars which diameter are more than 3 inches..
  • UPGRADED STRONG & DURABLE DESIGN: We upgraded the buckle part to 100% metal material. Besides, other parts are made of high strength oxford, have longer lifespan than other version on the market..
  • PROVIDE BETTER SECURITY IN VEHICLE: Our grab handles can easily help you in and out of the vehicle or to hold yourself in place while bouncing down rough road. The backseat grab handles also will provide better security to rear passengers..
  • EASY TO INSTALL: Strap the hooks & loops directly onto the roll bars and fasten tightly. Take down the headrest, put the rear seat passenger grip handles on, and reinstall the headrest.Finish in minutes..
  • PACKAGE DETAIL AND SERVICE: The package includes 4 x roll bar grab handles. If you have any questions, please don't hesitate to contact us. We will solve it very soon..
Check Stock

Traxxas Unlimited Desert Racer

  • Traxxas 85086-4 - Unlimited Desert Racer 4x4 SCT, LED Lights RTR, Fox.
  • Features: High-Voltage LED Lights Curved roof light bar (52 LEDs) Multifunction red and amber brake light/class light bar High-voltage 8-channel power....
  • Includes: (1) Unlimited Desert Racer 4WD Race Truck (1) Licensed Race Replica Painted Body (1) TQi 2.4GHz Radio System (1) 2200kV Motor (1) Velineon....
  • Specs: Length: 27.32” (694mm) Front track: 13.57” (345mm) Rear track: 13.57” (345mm) Ground clearance: 2.27” (58mm) Weight: 13.4lb (6.1kg)....
  • Part number(s) included (in factory packaging): 85086-4.
Check Stock