Reviews Crushing Equipment

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1/2inch50ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,1/2 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length:50"，ID：1/2inch，OD：0.83inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
  • 【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,3/4inch 25ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,3/4 in Dia

  • 【PREMIUM Liquid-Tight Conduit】- Length :25'，ID：3/4inch，OD：1inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit....
  • 【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

  • 【PREMIUM Liquid-Tight Conduit】- Length :50'，ID：1inch，OD：1.22inch， The Flexible Non Metallic Liquid Tight Electrical Conduit kit ​is....
  • 【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
  • 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
  • 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....
Check Stock

Sealproof 1/2-Inch Flexible Non-metallic Liquid-Tight Electrical Conduit Type B, UL Listed, 1/2\ Dia, 100 Feet, Made in USA

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

Woods 55094322 Liquidtite 3/4 in. X 50 ft. Ultratite Non-Metallic Conduit

  • Protects electrical cables in direct burial and concrete-encased applications.
  • Flexible PVC construction resists impact damage and crushing.
  • For use in industrial and commercial applications for Conveyors, blowers, cranes, air conditioners, machine, tooling and lubrication equipment.
Check Stock

Nylon End Dental Mallet ML01

  • Commercial Surgical Tool: Made with medical grade stainless steel to increase equipment life and investment. Surgical instrument produced with even structure to deliver effortless supervision to the practitioner.
  • Single-Ended Instrument: Features single working end with tool length of 165 mm. Dental tool weighs 221 g to enable exceptional control during dental practices. Medical mallet is built from top quality light weight steel to provide comprehensive strength to equipment.
  • ubstantial Dental Mallet: Purposefully constructed from autoclavable material to be significantly used during bone crushing procedures. Comes with effective metallic grip that delivers excellent hold in prolonged treatments.
  • International Quality Measures: Osung dental tools built with the view to deliver optimum performance. Each instrument is manufactured in ISO accredited factories with all the required GMP standards. All instruments carry CE mark and are 100 % authentic.
  • Attentively Packaged Clinical Products: Each instrument is clinically evaluated for flawless dental hygiene. All Dental products are cautiously packaged before shipping. Medical tools would be delivered in unharmed and novel state.
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1/2-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 1/2\ Dia

  • Use with Sealproof straight or right angle connectors.
  • can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

High Density Heavy Duty Outrigger Jack Pad Tow Truck, RV Snap Pads, Trailers, Stabilizing Jack Landing Pad 16 x 16 x 1 Inch

  • High Density Outrigger Pad: Outrigger pad protects concrete and other surfaces from the impact of heavy equipment. Ideal for utility trucks, small aerial lifts, tree trimmers, and runway equipment..
  • Waterproof and chemicals resistant - Helps prevent jacks and stabilizers from sinking into soft ground.
  • Constructed of recycled materials, UV resistant, weather-proof Non-Conductive, Waterproof and chemicals resistant 250 PSI crushing rate, load vertical capacity 50,000 lbs.
  • Durable And Lightweight: Made from sturdy HDPE (high density polyethylene), a lightweight alternative to rubber. The pads have an easy to grab rope-style handle..
Check Stock

Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 3/4-Inch 25 Foot Flexible Electrical Conduit Type B with 4 Straight and 2 90-Degree Conduit Connector Fittings, 3/4\ Dia

  • Made in USA. Use with Sealproof straight or right angle connectors.
  • can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
  • Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
  • outdoor, sunlight resistant, direct burial..
  • Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
  • Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
  • UL Listed Underwriter's Laboratories File No. E-129973.
  • UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check Stock

CGOLDENWALL DF-15 Hammer Mill Grinder Commercial Electric Herb Grinder Mill Industrial Automatic Continuous Spice Hammer Grain Mill Pulverizer Capacity 33 Pounds Per Hour Rotate Speed 20000r/min 110V

  • ...ommended that use it within 15 minutes at a time, and rested for ten minutes after 2 hours of using.
  • 【Suitable Application】It is crushed by the impact of the hammer swing. It is perfect for small amount production of 1 to 15 kg per day for lab study. This hammer grinder can also be used as small-scale production equipment, from coarse grinding to micro grinding can be.If you need grind larger amount ,you may choose 20kg/h Continuous grinder , will be also faster.
  • 【Continuous Grinding】This crusher can pour the ground results into the bag, so as to achieve the function of continuous grinding, you can add material while grinding.★★★ But please note that every time you put material in, it must be in small quantity and be put in slowly to avoid the jam in the crushing chamber, otherwise the motor will be overloaded.
  • 【Friendly Warranty】This item comes with 1-year warranty and lifetime technical support. If there are any questions in the future, warmly welcome to contact us. If the machine can’t start, it may be stuck, first clean the machine, especially the mesh screen , and replace the carbon brush, After the machine is cool down, press the black protector switch to restart..
Check Stock