Reviews Copper Water Pipe

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

  • RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
  • Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
  • Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
  • Ideal for application with a wide variety of fluids and gases including potable water applications.
  • Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

JOBYNA Electronic Water Descaler System, Alternative Chemical and Salt Free Water Softener Systems Whole House, Prevents Scale Build-up in Pipe, 3 Installation Methods, Works with All Pipes

  • ...here to the surface of pipes and equipment, while allowing the existing limescale decomposes slowly..
  • 【NEW GENERATION DESCALING SYSTEM】New electronic water descalers are equipped with LED light, which display its operating status more clearly. The wider and longer flat copper wire increases the area with the pipe and attaches to the pipes better, makes it easier to wind and works more efficiently..
  • 【THREE WAYS TO INSTALL】No need to damage the pipeline, just wind the coil outside the pipeline. You can install the host vertically, horizontally, or at any other angle by cable ties, adhesive hooks or screws(all the mounting hardware comes included). Reminding: salt free water softener needs to be installed on the water inlet pipe for maximum effect..
  • 【APPLICABLE TO ALL PIPES】The size of 2 copper coils is 39.4''×0.4‘’. The whole house descaler works all pipes, including iron, copper, plastic, stainless steel, even PVC, composite pipe, PE-X, etc. and suitable for pipes of 0.5-2 inches in diameter. Operating voltage is 110-120V..
  • 【100% MONEY BACK GUARANTEE】The scalebl....
Check Stock

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

  • 【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
  • 【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
  • 【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
  • 【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..
Check Stock

ELLO&ALLO Stainless Steel Shower Panel Tower System,LED Shower Head 6-Function Faucet Rain Massage System with Body Jets, Black

  • Shower System Water Line Connection Type: 1/2" FIP, Material: 304 stainless steel body. Copper shower faucet and PVC water pipe constitute the waterway..
  • Luxury shower panel has built-in LED temperature display, LED overhead rainfall showerhead, adjustable high-powered body massage jets, tub spout, and high-efficiency multi-function handheld shower wand.
  • Multi-outlet Switches which controls Multiple Combinations water effects, with 4 Adjustable Jets nozzles for Power Mist Massage and 3-Setting Handheld Shower Fixtures.
  • The shower panel allows you to turn 2 of them on at same time if you so desire. The key is water pressure. Copper shower faucet and PVC water pipe constitute the waterway..
  • Limited 2 Year Parts Warranty From Date of Purchase. This warranty is void if the product has been purchased from an unauthorized distributor..
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

Bewinner DIY 240mm Water Cooling Kit, DIY 240mm Cooler CPU/GPU Block Pump Reservoir with LED Fan Heat Sink Computer Water Cooling Connectors Kit, All-in-one Liquid CPU Cooler Kit

  • ...changer Radiator,9W 600L / H Waterproof G1/4 Thread size High quiet water Pump,160mm High capacity Cylindrical Water Reservoir make the circulation system clear and visible,The extreme performance dual LED fans offer a high air static pressure..
  • 【Universal Water Cooling Block】The CPU water cooling block made of copper and transparent plexiglass suitable for INTEL / AMD Dual Platform,the 0.8MM parallel waterway G1/4 universal thread GPU water cooling block made of copper and POM high temperature materials support 9.5mm ID / 12.7mm OD PU tube,or 10mmID/16mmOD solid tube,or 8mmID/12mmOD silicon tube..
  • 【Complete Accessories】A Set of Water pipe joints & hose clamp & plug and a Inner diameter 8mm/Outer diameter 12mmTransparent hose,So you don’t have to worry about installation at all..
  • 【100% Satisfaction Guarantee】 If you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution. Your satisfaction is our main concern..
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock

Highcraft PXJHNG003-10 PEX Support J-Hook Hanger with Nails for 3 in. Pipe, Rope, Cable Hard Plastic (10 Pack), 3 in, White

  • PEX TUBING PIPE HANGER: Cushions and Isolates Copper, PEX, PVC, PB Tubing Running Close to Studs, Beams, Framing, etc..
  • #1 CUSHION COPPER PIPE HANGER: This Will Cushion Your Copper Pipes Securely, and Reduce Banging, Clapping, Chattering, Clicking, and Ticking From Your Old Copper Pipelines. Its Plastic Design Allows for Movement, Heating and Cooling, and Expansion and Contraction.
  • VERSATILE: Great Cushion for Piping, Cable, Marine, Construction, etc.
  • Highly Durable Hard Plastic Design for Reliable, Long-Lasting Performance.
  • THE PEX REVOLUTION: PEX Is The Preferred Choice For Water Supply And Hydronic Heating Applications, Featuring Decreased Cost, Quicker Installation, Flexibility, Durability, Freeze Resistance And Corrosion Resistance! !.
Check Stock