Reviews Leak Copper Pipe
IWISS Angle Head F1807 PEX Pipe Crimping Tool for Copper Rings - 1/2&3/4&1-inch Three Crimper Set with Cutter
- 【Features】For 1/2”, 3/4”, 1” copper tubing pressing..
- Automatic locking of pressing tongs. 360-degree rotating head.
- Forging craft promises jaws to give pipe fittings an accurate press without scratches..
- 【Ergonomic Design】Extendable handles for improved leverage. Creates leak-free connections, No more brazing, soldering or flaring. Ergonomic handle design and comfortable handle can minimize user fatigue..
- 【Cutter & Deburring Tool】The cutter can quickly and easily obtain clean rounded cuts on pipes with outer diameter of 1/8" -1 1/4".
- Deburring tool with high-quality speed steel 360 degree rotary mounting head.
- Practical tools to make your project easier..
- 【Wide Application】Compatible with Viega Copper, Pro-Press, Elkhart, Conex Pipe Fittings..
Check StockSharkBite UC256LFA10 3/4
- ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
- AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
- COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
- LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
- QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
Check StockSharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC
- INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
- COMPATABILITY: Same as part numbers U370LFZ and U370LF.
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
- SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check StockSharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
- PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
- COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
- RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube
- 【What You Will Get】: This air conditioning copper pipe flaring tool set contains 8 tools: 6 Pcs different size drill bits, 1 Pc mini copper pipe cutter, 1 Pc deburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
- 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
- Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
- 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
- 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
- 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact....
Check StockSharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC
- INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
- COMPATABILITY: Same as part numbers U362LFZ and U362LF.
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
- SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check StockC447-020 2 CAP (SLIP)
- PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.
- Compatible with cast iron, plastic, Copper, or schedule 40 steel piping.
- May be used for non-pressure drain, waste, and vent (dwv) piping systems and sewer systems indoors and outdoors.
- Conforms to CSA B602, certified and UPC approved, rated for underground use.
- Flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.
Check StockComStar Copper Lock, No Heat Solder for Copper & Brass Pipes | Create a Permanent Leak-Proof Bond Instantly, Designed for The US Space Program and Meets US Military Specs | Made in USA | 10 ml
- An environmentally safe method for soldering pipes up to 2 inches (580 mm).
- A permanent leak-proof bond rated up to 500 psi with a temperature range -60°F to + 300°F.
- Great for all refrigerants with yellow metals, copper, brass pipe fittings & bond them instantly.
- Copper lock helps to test pressure for water systems within 2 minutes and A/C systems within 25 minutes.
- Does not require heat or solder to create a permanent leak-proof bond & can be disassembled at 400°F heat and then reapplied.
Check StockSharkbite 25031A Washing Machine Outlet Box with Water Hammer Arrestor, 1/2 inch x 3/4 inch MHT, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: Washing machine outlet box requires no special tools, no soldering, no crimping, unions or glue to connect. Just push to create a watertight seal.
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination.
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
Check StockComstar Copper Lock, No Heat Solder for Copper & Brass Pipes Create a Permanent Leak-Proof Bond Instantly, Designed for The US Space Program and Meets US Military Specs Made in USA 2 Oz. 10-800 Red
- An environmentally safe method for soldering pipes up to 2 inches (580 mm).
- A permanent leak-proof bond rated up to 500 psi with a temperature range -60°F to + 300°F.
- Great for all refrigerants with yellow metals, copper, brass pipe fittings & bond them instantly.
- Copper lock helps to test pressure for water systems within 2 minutes and A/C systems within 25 minutes.
- Does not require heat or solder to create a permanent leak-proof bond & can be disassembled at 400°F heat and then reapplied.
Check Stock