Reviews Copper Lag Screws

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Hakkin 3/8 Hex Lag Bolts Wood Screws 60PCS Assorted Wood Screw & Bolt Assortment Sets 1-1/2 2 2-1/2 3 3-1/2 4 Hexagon Head Lag Bolts for Wood Decks Building,Industrial

  • ...bolts for wood is coarse threads for superior holding, will not strip off..
  • 2.【Standard and Various Sizes】The hex lag bolts kit includes 6 different most common used sizes:3/8×1-1/2"，3/8×2"，3/8×2-1/2",3/8×3",3/8×3-1/2",3/8×4".
  • Quantity: 60 pieces screws and washers in total (30 sets)..
  • 3.【Project Center】These stainless steel lag screws are great for exterior household securing wood works industrial applications such as deck building or joining lumber，and DIY design..
  • 4.【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 5.【Guarantee in Hakkin】Hakkin hex lag screws undergo rigorous inspections to ensure they are 304 stainless steel and the right size you want.
  • Hakkin is a professional fasteners seller brand. We will do our best to provide you a pleasure shopping experience..
Check Stock

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

  • 【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
  • 【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
  • Length from 1'' to 3''. Thread Type are all Coarse (standard).
  • Quantity: 155 pieces screws and washers. Refer to Figure 2..
  • 【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
  • 【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

3/8 x 3 Hex Head Lag Screws Bolts 20Pcs 304 Stainless Steel 18-8 Partial Thread Hexagon Head Wood Screws by Black Oxide by SG TZH

  • RUGGED AND DURABLE - SG TZH Lag screws made of high-quality 18-8(304)Stainless Steel，which has higher corrosion resistance and anti-rust effect than ordinary screws, longer service life, not easy to damage, more solid..
  • EXQUISITE CRAFTSMANSHIP - This Lag Screws diameter: 3/8", length: 3inch, Wrench Size 9/16", excellent craftsmanship makes our Hex Head, fast, not easy to break, high strength, not easy to deform, not eccentric. Please check specfication by picture 2.
  • PROJECT CENTER: These Stainless Steel 18-8 Lag screws are great for exterior household and industrial applications such as deck building or joining lumber..
  • VALUE PACKAGING AND EASY TO USE - This Hex Head screws package contains 20Pcs, is not easy to slide during installation, and can be quickly and easily sinked. They are ideal for use at home, in the office or at work..
  • INTIMATE SERVICE - SG TZH focus on customer satisfaction, if you have any questions or are not satisfied, you can contact us by email, we will solve all your problems as soon as possible..
Check Stock

Lag Bolt Kit for Mounting TV Bracket Into Wood or Concrete Wall Heavy Duty Bolts Anchors and 2 Drill Bits

  • Application: The lag bolt kit fit for concrete wall, wood studs and brick wall.
  • Material: High quality plastic anchor, Zinc plated lag screws and alloy steel drill bits.
  • Package: The kit includes 4 lag screws, 4 concrete anchors, 4 washers,2 kinds of drill bits.
  • Note: Concrete anchors are not compatible with wood and drywall.
Check Stock

Century Drill & Tool 68700 Eye Lag Driver 1/4 Hex

  • Hardened steel body for professional Acoustic ceiling installs.
  • Easily drives eye lag screws into wood or metal with any drill or screw gun.
  • Compatible with all wood and self-tapping eye lag screws.
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
  • Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
  • Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
  • Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
  • Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.
Check Stock