Reviews Spiral Shank Copper Screws

Thread Taps Drill, 7Pcs/Set Better Chip Removal Spiral Combination Tap Easy Installation High Speed Steel for Soft Metal(#2)

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
Check Stock

uxcell Cemented Carbide Twist Drill Bits 8.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs

  • Cemented Carbide Tip: 8.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others.
  • Features: Milled U-flutes with deep-cut spiral delivers fast material removal. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel.
  • Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
  • Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
  • Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item)..
Check Stock

3/8 x 3/8 2FL HIGH SPEED STEEL, BALL NOSE, DOUBLE END MILL

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 5.2Deg, H-Si coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

KSaAuto Antenna Accessories for Dodge Ram 1500 2500 3500 2009-2022, 13 Inch Flexible Rubber Ram Replacement Antenna, New Spiral Ram Truck Antenna, Dodge Ram Radio FM/AM Reception, KR-2 (Bevel Head)

  • ... 2500 3500 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022. If you’ve been looking for a well-built antenna that fits RAM 1500 trucks, your search may just end today..
  • Car wash Safe: Made with Pure copper coil and EPDM rubber, the dodge ram antenna is extremely durable. With our super durable spiral car antenna, you can drive through a carwash and the antenna will come out unscathed..
  • AM/FM Reception: Stop tolerating the annoying static noise. KSaAuto's car Audio & video antennas ram 1500 2500 3500 is made with a pure copper coil which is More Conductive than Aluminum to ensure you enjoy crystal clear sound quality without annoying radio noise. Thanks to its highly conductive copper wires, it works in any weather and picks up radio signals in the air in bad weather..
  • Stylish Clean Look: Upgrade your RAM's look with this cool antenna replacement. The unique spiral curve design gives the antenna a good appearance. It looks cool when you install this new antenna on your RAM 1500/2500/3500 pickup truck..
  • Easy to Install: It only takes a few minutes to install your new aftermarket antenna. Just unscrew the old pickup truck antenna, install the screws suitable for the vehicle antenna, and then screw the spiral antenna on your RAM 1500/2....
Check Stock

TOOLANT Four Spiral Flute Step Drill Bit Pro 3/16 - 1-3/8 Advanced High Speed Steel Unibit Step Bit 3/8 Three-Flat Shank Unibit for Metal Stainless Steel Aluminum Wood Plastic

  • 90 DAYS WARRANTY - If you are not fully satisfied for any reason, please contact us for 100% refund or replacement. If the hex shank snap off, please contact us for replacement..
  • FOUR SPIRAL FLUTE - Four cutting blades design guarantees a faster and smoother cutting. Feels like a hot knife through butter!.
  • M2 HIGH SPEED STEEL - Prefect for Metal Sheet/Stainless Steel/Wood/Plastic/Aluminum Sheet and Copper..
  • DIMENSION - Includes from 7/8" to 1-3/8". Popular Size 7/8“, 1-1/8", 1-3/8" labeled.
Check Stock

Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

PALOSANTO - Palo Santo Holder for Natural Incense Sticks - Lightweight, Foldable and Extendable Copper Incense Holder for Palo Santo Sticks - Made in Italy

  • Handcrafted copper incense holder: light your Palo Santo sticks and place in this elegant, handcrafted copper holder and let them smolder..
  • Palo Santo holder ideal for supporting for the lit wooden sticks, the spiral shape symbolizes that of infinity and the beneficial properties of copper, thanks to its flexibility it adapts to any size stick..
  • Once you have lit the Palo Santo stick, simply place it gently inside the spiral, which will wrap it around it giving support during combustion..
  • Handcrafted by Italian artisans, our copper spiral incense holder features a simple yet elegant design and is height adjustable..
  • By purchasing our copper spiral, you are guaranteed a unique product with low environmental impact as it is handmade..
Check Stock

Merit M-9-2.5 Extra-Shank-Length Cartridge and Spiral Roll Mandrel, 1/8\ Pilot Diameter x 1\ Pilot Length, 4\ Overall Length, 1/4\ Shank Diameter x 2-1/2\ Shank Length

  • Extra-shank-length mandrel mounts cartridge and spiral rolls onto a grinder that accepts a 1/4"-diameter shank and has an extended shank and 4" overall length for hard-to-reach applications.
  • Fits cartridge and spiral rolls with a 1/8"-diameter center hole.
  • Steel provides strength and extended tool life.
Check Stock

ACTOOL Industrial HSS Step Drill Bit 3/16 inch to 1 inch with 3/8 inch Shank, Double Spiral Flute with 14 Step Size

  • Made of industrial-grade M2 high speed steel, heat treated for maximum durability.
  • Two flute spiral design provides longer life and better chip removal,3 flatted shank prevents slipping in drill chuck.
  • Drills 14 hole sizes from 3/16 inch to 1 inch in 1/16 inch increments.
  • CNC fully grinding for longer tool life to save drilling cost.
  • Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates.
Check Stock