Reviews Copper Aluminium Terminal

Behorse 350Pcs Battery Terminal Connectors, Copper Wire Lugs AWG4 6 8 10 12 with Heat Shrink Set, 170Pcs Battery Cable Lugs Ends Ring with 180Pcs Heat Shrink Tubing Assortment Kit

  • ...e ends are made of 100% annealed copper, which has good electrical conductivity, heat resistance and corrosion resistance. 3:1 The heat shrinkable tube is made of high-quality materials, which is thick and durable. Can withstand up to 600 volts, 290 degrees.
  • Packing list: You will get 12 kinds of AWG 170 copper ring terminal blocks, SC4-6 20, SC4-4 20, SC6-8 20, SC6-6 20, SC10-6 20, SC10-8 5, 1 0 pcs SCC 16-8, SC16-6 10 pcs, SC25-10 5 pcs, SC25-8 10 pcs, SC25-6 10 pcs, 180 pcs 3:1 heat shrinkable tube.
  • High quality/safety and reliability: All cable lugs are of common size and conform to American standards. The terminal adopts a heavy-duty structure, which improves high temperature resistance and durability. The closed design is sealed and moisture-proof to ensure the reliability of the connection.
  • the high-standard opening is convenient for inserting wires..
  • Wide application: These copper lugs are used in conjunction with heat shrinkable tubes, which are safe and reliable. This copper battery terminal is suitable for solar panels, distribution boxes, ships, automobiles, motorcycles, ships, trolling motor wiring and other household appliances..
  • Easy to organize: each copper ring terminal has a mark, you can throw the kit into your toolbox without worrying....
Check Stock

2pcs 12V Automotive Top Post Car 3 Way Battery Wire Cable Terminals Clamp Connectors Kit Positive and Negative Set Red & Black

  • 【Dimension】Size: Appro2.16X1.37X1.77 inch (As the picture show) ..
  • 【Sturdy & Durable】Our quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss.Positive Negative Battery Terminal Material: Pure Copper + Plastic..
  • 【Easy to use】Our products——the battery post terminals Connectors Copper Color: Red(+) & Black(-).Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
  • 【Wide application】These battery terminal connectors can be used for most 6/12V Cars, Vans, Caravan, Motorhomes, boat, Truck Batteries etc. Just make sure to connect the correct terminal for the correct polarity..
  • 【You will get】2Pcs pure copper battery terminals connectors.I believe our product can fully meet your requirements. If you have any questions, please feel free to come to us, we will provide high-quality guarantee and friendly customer service..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...able (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
Check Stock

ORAEVY Car Battery Cable Terminal Clamps，Negative and Positive Connectors ，Battery Terminal with Plastice Cover Compatible with Car,Van,Truck.

  • 【Applicated in】: It is used for most automobiles, Van，trucks，boat and caravan battery terminal connector..
  • 【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
  • Negative Battery Terminal Connectors: 5/8"(16mm).
  • 【High quality & durable】:Our Battery Terminals Connectors are using electroplating process ，The corrosion resistance is quite good.And the....
  • 【Package Includes】: 1pair of Negative Black (-) and Positive Red (+) Battery Cable Terminal Clamps Connectors and 2 pieces Pure Copper Wire Lugs....
  • 【Professional after-sales】：Buy with confidence! We sell professional auto parts and provide free technical support. If you have any problems or....
Check Stock

Terminal Block,2 Pack 8 Circuits 20-30A 200v-450v Dual Row Screw Terminals Strip +32 PCS Heat Shrink Wire Connectors

  • Practical Terminal Block Kit:How to clean up your cluttered wire connection?Our double row screw terminal strip block can help you to connect bare wires to avoid clutter, making wiring connection simpler and more efficient.This way you can easily disconnect a wiring branch without taking down the entire system..
  • Product Feature:The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite.
  • We also provide thick copper heat shrink wire connectors to ensures strong secure crimping every time..
  • Heavy Duty:The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance. High-quality insulated fork wire connectors kit is thick copper,with safe and durable..
  • Easy Install:The terminal strips are easy to install and hold in place by two screw holes at either end of the terminal. One mounting hole each end for fixed mounting.The fork terminal stripe can be cut in any position to meet with your different demand..
  • Package Included:2 x 8 positions dual row terminal blocks set,32 pcs insulated fork wire connectors in a bag.Terminal Block rated voltage/current Universal : 20A-30A/200-450V.And 100% guaranteed,If you have any questions about the product, we support un....
Check Stock

Ampper 12-24 V Master Battery Disconnect Switch, Battery Power Cut Isolator Killer for Car, Vehicle, RV and Boat (Aluminium Housing, On/Off)

  • Heavy Duty: all aluminium housing, durable made for safety use. Mounts in 3/4" hole, equiped with a face plate..
  • Operation: On/Off 2 positions, 200 A continuous at DC 12V, 400 A momentary at DC 12V..
  • Compatible: used for DC 12 - 24 V systems to isolate and secure the electrical system, can stand alone or be locked together with other switch..
  • Purpose: eliminate any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely..
  • Copper terminal stud size: 3/8" (10 mm) x 2, very easy to install, universal used for car, vehicle, Rv and boat, also electrical equipment's switch..
Check Stock

Positive 36-inch 3/8” Positive Terminal Battery Replacement Cable, Heavy-Duty 2 AWG 100% Copper, 100mm Accessory Lead, 10mm Copper Lug End and 19mm Top Post Terminal, by Tech Team

  • When it comes to battery cables the LOWER the AWG number the HIGHER the current carrying capacity. Tech Team’s #2 AWG cables carry far more current than other #4 AWG, #5 AWG, or #6 AWG cables. This means less heat buildup and less voltage / amperage drop which prolongs the life of starters, inverters, motors, and other connected electrically powered devices..
  • Tech Team’s Positive Terminal Cable feature a 10mm – 3/8” diameter tinned double crimped 100% copper lug terminal end with a protective heat shrink polyolefin sleeves to prevent moisture incursion and eliminate corrosion and a military grade 19mm lead top post terminal with a 100mm accessory lead..
  • Tech Team’s battery cables are the best you will find anyplace and are the best possible option for Marine, Boat, Solar, Inverter, Motorcycle, Automobile, Tractor, Bulldozer, Excavator, Riding Mower, Golf Carts, and many other applications..
  • Includes one (1) red 36 inch #2 AWG 100% copper stranded wire top post positive terminal battery cable, a 100mm accessory lead, and a 100% copper 3/8” diameter tinned lug terminal end with heat a shrink protective sleeve..
Check Stock

Scosche Install Centric ICAK84 True 8 Gauge Hybrid OFC 4-Channel High Current Amplifier Wiring Kit Complete Car Amp Kit Twisted Pair Audio Cables In-Line Fuse Holder

  • HYBRID OFC POWER CABLE: This is a True 8 Gauge Oxygen-Free Copper and Copper-Clad Aluminum Hybrid Power Cable. Our kit features a blend of heavy-duty oxygen-free copper and copper-clad aluminum in a hybrid power cable designed for excellent conductivity, durability, and value..
  • IN-LINE FUSE HOLDER: The MAXI and ATC fuse holders are molded and pre-installed in-line with weatherproof covers for convenient installation and superior protection. It is designed for excellent conductivity, durability, and value..
  • DOUBLE STRENGTH GROUND TERMINAL: The Double Strength Ground Terminal is a unique pre-terminated ground terminal design that dramatically simplifies installation and improves performance..
  • TWISTED PAIR AUDIO CABLES: The twisted pair RCA cables reject noise to provide better sound performance through your amplifiers. Our kit is constructed with heavy-duty oxygen free copper and copper clad aluminum for excellent conductivity durability and value..
  • BUY WITH CONFIDENCE: This product is backed by Scosche's Lifetime Tech Support and a Limited Lifetime Warranty, so you can purchase this product with the peace of mind that it will last..
Check Stock

2 Pcs RCA Terminal Gold Plated Copper RCA Panel Mount Female Jack Terminal Socket Audio Connector

  • [Copper Gold Plated] The terminal sockets is made of pure copper, gold plated for improving signal transfer and durability..
  • [Good Contact Performance] The terminal sockets has good contact performance, which is convenient and practical solder connection, and RCA jack female chassis connector for amplifiers, solder type..
  • [Suitable Size] This terminal sockets can fix 2mm thick panel, open 12mm diameter fixing hole..
  • [Good Elasticity] This terminal socket adopts phosphor bronze material so it has good elasticity, resistance to fatigue and deformation, ensure that the insertion is not loose, deformation, and good conductive contact..
  • [Guarantee] If you are not satisfied with the RCA socket you received, you can send emails to us at any time. We will reply you instantly and help you solve your problem..
Check Stock

WARN 22680 Quick Connect Winch Power Cable Connector Plugs, 1 Pair

  • {INSULATED FLAME-RETARDANT SHELL}: The shell of the battery quick connect/disconnect is made of high-quality PC flame-retardant material, with a fire rating of UL94 v-0, safe, wear-resistant, and compression-resistant, ensuring stability in use in complex and harsh environments.
  • {SILVER COPPER PLATED TERMINAL}: The thicker copper-plated silver of the battery quick connect disconnect set greatly enhances the electrical conductivity, which helps prevent ignition when large current passes, and ensures stable current transmission.
  • the copper terminal of battery quick disconnect kit is convenient for cold pressing, welding, and faster and firmer wiring.
  • {SPECIFICATIONS AND PACKAGING of the BATTERY QUICK CONNECTOR SET } Voltage: 12-36 volts DC.
  • the package contains 6 groups of 6 to 10 battery quick connectors, including 6 connectors, 12 terminal pins, 6 caps, the quantity is enough to meet your different Demand or replacement.
  • {EASY TO INSTALL}: You can quickly install the plugs of these battery quick disconnect connectors, insert the wires into the terminal pins, and then perform welding or crimping. The ends of the connectors are the same, so both ends are suitable for connecting to the power or load side.
Check Stock