Reviews Terminal Compression

Hammer Lug Crimper Tool, Huazu Hammer Crimper Wire Terminal Crimper for Crimps Battery and Welding Cables 8 AWG to 2/0 Wire Gauge

• FEATURES: All steel material, sturdy and durable. Tight riveting, small size and easy to carry. The elasticity of the compression spring acts on the crimping port, so that the port is in contact with the terminal at all times for easy operation..
• WIRE GAUGE: 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 1/0 and 2/0 (American Wire Gauge) cable..
• EASY TO USE: Adjust the size of the wire terminal crimper according to the wire. The V-shaped channel can fix the terminal in place and prevent it from sliding. Then put the connector and cable under the hammer crimping machine to keep it stable, and finally hit 1-2 times with a hammer to clean crimps. It is recommended to use a larger hammer..
• CRIMPING TOOL: Hammer Lug Crimper Tool is ideal for batteries and welding cables..
• PRODUCT GUARANTEE: You can enjoy our first-class service with 12-MONTH Warranty and 24-hour support for customer service. Please feel free to contact us if you have any issues..

TE CONNECTIVITY / AMP 485043-1 TERMINAL, OPEN BARREL SPLICE, CRIMP (5 pieces)

• Conductor: #14-#10, Str, #12-#10, Sol, 6 sq mm.

Soundstream R3.8 8' 500 Watt Reference R3 Subwoofer

• Nickel Plated 12 ga. Compression Wire Terminal.

MOLEX 19043-0010 3 WAY ADAPTER, DUAL MALE TO SINGLE FEMALE, QUICK DISCONNECT, 6.35MM, UNISULATED (10 pieces)

Soundstream R3.12 12 800 Watt Reference R3 Subwoofer

• 12" Dual 2 Ohm Reference R3 Series Subwoofer | Power Handling: RMS: 800 watts | Max: 1600 watts.
• Oversized concave IMPP primary cone | Die-cast aluminum Soundstream reference R3 frame | Inverted roll polyether foam surround.
• 2.5" 4-layer stitched voice coil | Nickel plated 12 ga. compression wire terminal.
• Double stacked magnet, t-yoke, and top plate.
• Top-mount depth: 6.875" | Sensitivity: 84.66 dB.

TEMCo TH0006 Hydraulic Electrical Cable Lug/Terminal Crimper Kit with 18 Die Sets 12 AWG - 00 (2/0) (5 US TON)

• New for 2020, TH0006 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
• TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
• 9 Standard size dies for American Wire Gauge 12 through 2/0 (00). Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
• 9 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
• Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..

BURNDY KA Mechanical Terminal Lug, 1 to 4/0 AWG Stranded Copper Conductor, 3/8 in Stud, 1 Bolt Hole, Copper

• Copper compression narrow tongue terminal.

Pair Memphis Audio MJPT25 MOJO Pro 25mm 1\ 200w Car/Pro Bullet Tweeters+ROCKBOX

• 4-inch High Compression Titanium Bullet Super Tweeter (sold individually).
• Max Power: 600 Watts | RMS Power: 300 Watts.
• 1.75" High Temperature Kapton Voice Coil | Impedance: 4 Ohms.
• In-line Capacitor Crossover Included and Connected to Positive Terminal.
• Frequency Response: 2.5 kHz - 20 kHz | Sensitivity: 102 dB.

ACDelco Gold 49AGMHR 36 Month Warranty High Reserve AGM BCI Group 49 Battery

• Extended cold cranking amps delivery means more power for today's demanding electronics.
• Group 24F / 43R (reverse terminal) battery with 775 CCA (cold cranking amps) and 120 R.C. (reverse capacity).
• 20x the vibration resistance of conventional batteries.
• Superior vibration resistance, optimized component compression ,and fortified posts, straps and welds.
• Superior corrosion resistance sealed housing with manifold venting system.

TEMCo Industrial Hydraulic Cable Lug Crimper TH0005 V2.0 (11 US TON) 10 AWG to 600 MCM Electrical Terminal Cable Wire Tool Kit with 32 Die Sets

• New for 2020, TH0005 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
• TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
• 16 Standard size dies for American Wire Gauge 10 through 600MCM. Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
• 16 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
• Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..