Reviews Connecting Rod Bearing

Crower ML93006B5-8 Steel Billet Connecting Rod Set - Small Block Chevy 6.000\ - Set of 8

OEM replacement connecting rod,ideal for the motorbike.
High quality forged steel material,efficient and durable.
Package including connecting rod,crank pin,crank pin bearing,thrust washers.
Quality Assurance!If you are not satisfied with our products,we accept all of the return,replacement or refund requests.

【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..

the Angle of ening tool, and of gravity is stable without skidding..
Bearing made of high quality steel, to rust, connecting rod made of aluminum alloy, light and durable.
When using ening tool, smoothly the polishing tool such emery piece, sandpaper, etc..
Applicable: wood , Planer, Graver, carving tool, , edge , the thickness is within 15mm.

Applicable: wood , Planer, Graver, carving tool, , edge , and more the thickness is within 15mm.
Easy to the Angle of ening tool, and the center of gravity is stable without skidding..
Bearing made of high quality steel, not easy to rust, connecting rod made of aluminum alloy, light and durable.
When using the product ening tool, it can smoothly fit with the polishing tool such as or emery piece, sandpaper, etc..

These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..

[SPECIFICATIONS] Cam fittings: diameter 15mm (0.59"), height 13mm (0.51"). Connecting rod bolts: total length 36mm (1.41"), thread length 9mm (0.35"), thread diameter 6mm (0.24"). Plastic nuts: diameter 10mm (0.39"), height 9mm (0.35").
[MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
[APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
[EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..

COMPATIBLE WITH: 02 - 14 ACURA / HONDA 2.0L / 2.3L / 2.4L DOHC K20A2 K20 K23A1 K24A K24.
1 KING RACING [XP] SERIES Crankshaft Main Bearing Set (Standard Size).
1 KING RACING [XP] SERIES Connecting Rod Bearing Set (Standard Size).
1 KING Thrust Washer Set (Standard Size).

Engine connecting rod and piston holder measures 24 inch long x 12 inch wide x 9-1/2 inch tall.
This combination rod and piston holder safely supports piston and connecting rod assemblies during engine teardowns or assembly.
Slots are 4-3/4 inch long x 1-1/2 inch wide to accommodate most piston/rod combinations.
Assembly is required and can also be disassembled if desired after use for easy storage.

These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.