Reviews Connecting Bolts

Allstar ALL96480 Black Plastic Engine Connecting Rod Guide Tool for 3/8\ or 7/16\ Rod Bolt

  • Engine connecting rod guide tool fits 3/8 inch or 7/16 inch rod bolts and is made from quality black plastic.
  • Simply slip the tool over the rod bolts to ease piston installation and eliminate rod bolts from hitting the crank.
Check Stock

maXpeedingrods Connecting Rods 1.8T Engine for VW Golf MK4 Passat for Audi A3 A4 A6 TT with 5/16\ ARP 2000 Bolts 19mm (Tapered Small End)

  • Fit for Audi A3 8L1 1996-2003 1.8T, for Audi A4 B5 1994-2001 1.8T, for Audi A4 B6 2000-2004 1.8T.
  • Fit for Audi A6 C5 1997-2005 1.8T, for VW Golf MK IV 1997-2006 1.8T, for VW Passat 3B5 1997-2000 Estate 1.8 T.
  • Material: 4340 EN24 H-Beam Connecting Rod.
  • Dimensions: Center to center length: 144mm/5.67" Big end diameter: 50.6mm/1.992" Small end diameter: 19mm /0.748"( tapered small end) Big end width: 19.9mm /0.784" Small end width: 19.9mm/0.784".
  • Package Contents: 4 Pieces of H-Beam Connecting Rods.
  • 8 Pieces of ARP 2000 5/16" Bolts (Note: Extra cost for upgrading to ARP L19 bolts).
Check Stock

Hydraker Lawn Mower & Mount Plate Fit for EZ-Ride Sulky and Sulky/Velke New

  • Hitch & mounting plate Fit for a EZ-Ride Sulky and Sulky/Velke units..
  • Bolts to walk behind commercial mowers (bolts not included)..
  • Hitch mounting holes are 4" on center. From bushing to bushing is 2-5/8''..
  • Mower hitch features solid steel construction.Black and gray hammer powder coated paint finish for long lasting corrosion resistance..
Check Stock

Cerwin Vega SB4X 800W Max / 200W RMS Six (6) Speaker Waterproof Sound-bar System

  • All-Weather Construction for use in almost any environment.
  • Auxiliary Input for Connecting Devices Via 3.5mm.
  • Auxiliary Output for Connecting An External Amplifier or Additional Soundbar Mounting Clamps Fit 1.75″ and 2″ Bars.
  • Long Bolts for Golf Cart “Tube” mounting Power, Ground, and Accessory Wire Included for easy installation..
Check Stock

20 Sets Hardware Fixing Screws Set, Cam Bolt Nut and Dowel with Pre Inserted Nut, Dowel Bolts Nut Locking Cam for Fitting Furniture Table Cabinets Wardrobe

  • Size of details: cam fittings: 0.56 * 0.97 inch ( 15 * 12 mm), total length of the connecting screw 1.57 inch ( 40 mm), plastic nut size: 0.93 * 0.93 inch (10 * 10 mm)..
  • Perfect Tool for Repairing Furniture:When you move your furniture and cause wardrobes or cabinets lack fixtures,These furniture connector screws are perfect substitutes to assemble and secure your furniture..
  • Sturdy & Durable:Eccentric cam and bolts fitting dowel made of aluminum alloy,sturdy and durable,anti-rust and anti-corrosion,can maintain a long service life and save a lot of time and energy to you..
  • Wide Application:Furniture connector fixing screw can be widely used in various types of flat pack furniture,such as wardrobes,closets, drawers,cabinets,bed cabinets etc,suitable for home,office and other occasions..
  • Package includes: cam fittings * 20 Pcs, connecting rod bolts * 20 Pcs, plastic nuts * 20 Pcs. Bolt nuts are made of zinc alloy with nickel-plated surface, pre-assembled nuts are made of plastic..
Check Stock

CDHPOWER 2 Stroke LD90 Motor w/o CDI -Upgraded pk80 Motor Silver Color Engine-Gas Motorized Bicycle 66cc/80cc

  • CDHPOWER LD90 Motor w/o CDI and Excluding 2pcs anti vibration black rubber for the motor mount,upgraded pk80 motor.
  • better adjusting Clutch a little before riding..
  • Includinhg spark plug and piston kit;Excluding two head plug CDI Box ( Asin for two head plug CDI: B098Q988VJ ).
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
  • FYI: the LD90 motor is compatible with all brand 2 stroke 66cc/80cc gas motor kit.
Check Stock

CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already.
  • better adjusting Clutch a little before riding.
  • High hole Piston and Long connecting rod.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

maXpeedingrods Connecting Rods with ARP 2000 Bolts for VW Golf MK3, Jetta MK3, New Beetle with 2.0L ABA Engine

  • Fit for Volkswagen Golf MK3, for Volkswagen Jetta MK3, for Volkswagen Passat, for Volkswagen New Beetle 1992-present.
  • Package Contents: 4 Pieces of connecting rods, 8 pieces of ARP 2000 bolts (Extra cost for upgrading to ARP L19 bolts).
Check Stock

binifiMux 90pcs Crib Screws Furniture Cam Lock Connecting Screws Nuts Assortment Kit,Hex Socket Cap Screws/Cam Fitting/Dowel/Pre-Inserte for Cabinets Cupboards Chairs Boards Headboards

  • ♔♔Include parts: M6 Barrel Nuts, Pre-inserted nuts, Eccentric Wheel, Dowel, Furnitue Connecting Cam Fittings, M6 x 50mm Bolts, Support Pins.
  • ♔♔Product name: Furniture 3-in-1 Connecting screws and Eccentric Wheel and Crib Screw Barrel nuts Kit.
  • ♔♔Used for: furniture, crib, baby bed, headboard, cabinet, desk, chairs, Wardrobe.
Check Stock

Steel I-Beam 5.7\ Connecting Rod Set Press Pin for Chevy 350 5140

  • Sold as a set of 8, including all items in the picture (with bolts).
Check Stock