Reviews Concrete Repair Paste

Loctite Heavy Duty Epoxy Gel, Quick Set, 0.85-Fluid Ounce Syringe (Pack of 8)

  • 【Good Bonding Strength】This metal repair paste forms a strong and stable permanent bond, which can last a long time. According to different uses, it can be shaped, tapped, filed, sanded and drilled..
  • 【Effective Adhesion】Form a strong and stable permanent bond, this metal repair paste can provide a strong and long-lasting repair to metal and multiple other surfaces. It can bond almost any clean surface without dirt and oil..
  • 【High Temperature Resistance】Can withstand temperatures up to 150°C. After fully cured, it is as hard as iron and provides a uniform adhesive layer thickness..
  • 【Multi-purpose】This metal repair paste is mainly used to fill casting defects such as steel casting, sand holes, pores, and cracks. It can also be used to repair fuel tanks, pipelines, concrete cracks, etc..
  • 【Easy to Apply】Simple drying application programming. It is simple and convenient. Just mix, apply and let it dry for a few hours. Full curing time is up to 24 hours..
Check Stock

Flex Seal Black Flex Paste 1lb - Leak Repair Bundle with Putty Knife Set + Daley Mint Cleaning Towel | Quickly Fills Gaps Holes Cracks

  • Receive 1, Black Flex Paste (1lb) of rubberized paste that clings to the surface and instantly fills large gaps, cracks, and holes around your home.
  • Set includes 1.5 inch, 2 inch, & 3 inch putty knife.
  • Receive 1, Daley Mint towel to scrub excess paste from putty knives, clean spills, & wipe excess from surface application.
  • Flex Paste seals a wide variety of surfaces, including: wood, glass, tile, concrete, aluminum, metal, brick, masonry, copper, fiberglass, porcelain,....
  • For indoor and outdoor sealant to use around your home, RV and motorhome, concrete repair, car and boat maintenance, bath and shower, and more.
Check Stock

Flex Seal White Flex Paste 3lb - Crack Repair Bundle with Putty Knife Set + Daley Mint Cleaning Towel | Quickly Fills Gaps Holes Leaks

  • Receive 1, White Flex Paste (3lb) of rubberized paste that sticks to the surface and instantly fills large gaps, cracks, and holes around your home.
  • Set includes a 1.5 inch, 2 inch, and 3 inch putty knife.
  • Receive 1, Daley Mint towel to scrub excess paste from putty knives, clean spills, & wipe excess paste from surface.
  • Use on wide variety of surfaces, like: wood, glass, tile, concrete, aluminum, metal, brick, masonry, copper, fiberglass, porcelain, natural stones,....
  • For indoor and outdoor use around your home, RV and drywall patch, concrete repair, car and boat maintenance, bath and shower, and more.
Check Stock

DRICORE PRO Concrete Repair Crack Injection Expanding Foam (Step Two) | Polyurethane for Sealing Indoor & Outdoor Cracking in Home, Wall Filler, Basement, and More | Moisture Tolerant

  • NEW, EASY, SAFE: DRICORE PRO Concrete Repair Crack Injection Expanding Foam uses an advanced, moisture resistant formula to create the perfect, high-strength injection foam to fill and fix cracks, pits, holes, and more.
  • THIS ITEM IS STEP TWO OF THREE: Follow the directions closely. This is part two of a three part repair and sealant system. This product is meant to be used with DRICORE PRO Concrete Crack Prep Surface Paste to fully cover and fill cracked, broken, or split concrete and DRICORE PRO Concrete Repair Carbon Fiber Reinforcement Kit to strengthen the structure.
  • GIVE YOUR PROJECT SOME POWER: Our unique crack repair system allows you to finish the job with additional carbon fiber reinforcement (sold separately) and Injection Ports (sold separately)..
  • COST EFFECTIVE, SIMPLE TO USE: Fix your clients’ apartment, condo, or house. Combine with carbon fiber reinforcement to strengthen foundation and basement wall repairs. Save both time and money by using our specially engineered repair system for your next project or concrete service job. Perfect for any size of workplace or household!.
Check Stock

Polygem Liquid Concrete Repair (LCR) Kit Penetrating Injection Epoxy for Foundation & Concrete Crack Repair & Leak Prevention DIY Complete Kit Repairs Average Concrete Foundation Crack of 8 feet

  • Use for leak repair in basement concrete foundation repair, industrial and residential concrete floors, patios, sidewalks, balconies, pools and parking decks, reservoirs, tanks and more..
  • This product restores the structural integrity of the cracked wall by filling the crack with a high-strength adhesive that essentially "welds" the cracked wall together. This is not an expansion foam product..
  • Excellent adhesion to concrete, wood, fiberglass, and metal surface.
  • Wait 24-hours after applying epoxy paste to the crack for proper cure. After injecting the epoxy from cartridges, wait another 24-hours for full cure..
  • Each kit contains enough material to repair an average 1/16 inch wide, 8-foot crack in a concrete wall.
Check Stock

PC Products PC-Concrete Epoxy Adhesive Paste for Anchoring and Crack Repair, Two-Part 102 oz in Two Pails, Gray 71021

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

PC Products 70086 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 1.4 oz in Applicator Syringe, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (30') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

DRICORE PRO Concrete Repair High Strength Anchoring Epoxy Paste (6 Pack) | Fast Curing, Extra Strength - for Repairing Cracks and Signs of Cracking in Foundations, Walls, Basements, Pools, Cement

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray (Fоur Расk, Gray)

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock