Reviews Compression Fitting Removal Tool

JEUCLEL US Standard Olive Remover Puller Tool for 1/2-inch / 3/4-inch Dia Solid Brass Pipe Fitting, Olive Removal Tool for Copper Pipe, Compression Sleeve Puller

  • 【Ideal Tool】 This olive puller is the ideal tool for removing olives from pipes. It utilizes a compression fitting to lock the nut, thereby removing damaged or used olives from the pipe without damaging the pipe..
  • 【Applicable Specifications】 The olive puller can be applied to brass or copper pipes with diameters of 1/2 inches and 3/4 inches..
  • 【Premium Material】 The olive puller is made of solid brass. It has the advantages of high strength and high hardness. It has strong wear resistance and corrosion resistance, and has a long service life..
  • 【Easy to Use】 This olive removal tool is very simple to operate, no need to read complicated instructions, it can be used easily. Save a lot of time and effort..
  • 【Wide Applications】 Olive removal tools are capable of various tasks. It is applied to the work of dismantling olives in various scenarios. It is an indispensable cost-effective tool..
Check Stock

BELEY 1/2 Inch & 3/4 Inch Olive Remover Puller Tool Removal Tool Solid Brass Copper Pipes Fitting Compression Fittings Thread Tool Puller Metric Handle Nut

  • US 1/2 Inch & 3/4 Inch Ferrule Removal Tool: The olive puller is suitable for any solid brass pipe fittings with a diameter of 15mm and 22mm. Solid....
  • Main Function: The olive puller uses a compression fitting to lock the nut, and takes out the used or damaged olive from the copper pipe without....
  • High-Quality: The copper pipe fittings are made of solid brass. The high-quality brass makes the product sturdy and durable, with high strength, high....
  • Easy to Use: The olive removal tool can remove most olives and can also increase torque, which is appropriate for various tasks. And the operation is....
  • After Sales Service: We provide 7X24h service. If you have any questions about this brass tube, please feel free to reach us via email..
Check Stock

NOVINO Grease Zerk Fitting Tools Fits 1/4"-28 SAE,1/8"-NPT, M10x1 M8x1 and Grease Zerk Fittings with hex Size 3/8" 5/16" 7/16",Multi-Tool for Remove Install Rethread Damaged Broken Zerk Grease Fitting

  • 2 set Heavy-Duty alloy steel galvanize grease zerk tool. One fits for 1/8"-NPT PTF grease zerk fitting, M10x1 and grease zerk fittings with hex size 3/8" (9.5mm) & 7/16" (11mm). One fits for Fits 1/4"-28 SAE, M8x1 and Zerk fittings with hex size 5/16" (7.85mm) & 3/8" (9.5mm).
  • A must have grease fitting multi-tool: 4 tools in one grease zerk kit---install,remove,re-tap holes( repair 1/8"& 1/4"-28 tap thread) and maintain zerk grease fittings .Make job more easier and save time..
  • Function 1---Remover and Installer. The silver sockets are grease fitting removal & install tool,used to removal damaged broken grease fittings OR install straight and angle grease zerk fittings( 30, 45, 65, 90 degree angles ).
  • Function 2---Thread Cleaner and Restorer.The black taps on the cross ends are grease fitting cleaning tool ,designed to clean out the threads of a clogged fitting and retreading repair correct fitting thread..
  • Wide use:Our grease zerk fitting tool kit is designed to meet requirements on tractor/loader/lawn mower/excavator/rotary ....
Check Stock

Fiada 2 Pcs Olive Puller Olive Remover Puller Tool Compression Sleeve Puller Ferrule Removal Tool for 1/2 inch and 3/4 inch Brass Pipes

  • Applicable Model: the ferrule removal tool can be applied for brass pipes or copper pipes with diameter of about 15 mm/ 1/2 inch and 22 mm/ 3/4 inch,....
  • No Damage to the Pipe: the compression ring removal tool is an ideal tool for you to remove olives from pipes, allowing you to remove damaged olives....
  • Sturdy for Long Time Use: made of solid brass material, the compression sleeve puller is smooth on the surface, with high strength and hardness, not....
  • Simple to Apply: the ferrule puller is easy to use, no need to read the manual or use other tools to work, saving your time and energy, convenient for....
  • Wide Range of Applications: the olive puller for compression sleeve has a wide range of applications, to increase torque and remove olives more....
Check Stock

Pipe Olive Remover Puller Tool, CATUDIY Olive Puller for Compression Sleeve Suitable for Brass Pipes Plumbing Tools with Diameters of 1/2 Inch & 3/4 Inches Ferrule (US Standard)

  • 【Applicable Model】The compression sleeve puller not damage is suitable for brass pipes with diameters of 1/2 Inch and 3/4 Inch..
  • 【Powerful Design】The ferrule puller tool is able to remove used or damaged olives from the copper pipe without damaging the pipe by utilizing compression fittings to lock the inches nut, olive puller can work on air-conditioning pipes.
  • 【Ideal Removal Tools】The compression ring removal tool can increase torque, which is suitable for various tasks -- A handy duck puller tool to remove neatly used or damaged olives.
  • 【Superior Material】This Olive puller for copper pipes fittings puller are made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life.
  • 【Easy Using】The pipe tool can be used easily without checking any manual. Simple operation reduces frustration, saving more time and energy.
Check Stock

Raincol O Ring Kit Rubber O Rings Assortment - 270 Pcs 18 Sizes for Automotive, Gasket Fuel Resistant Faucet Plumbing Assorted Sealing Washer, Piece Repair NBR, Removal Tool and Silicone Grease

  • ...nitrile repairs, essential for all workshops and onsite service engineers. Range of 18 sizes Rings, no need to purchase individual O-Rings. Quick identification and easy storage for multiple O-Ring kit contains 270 pieces in 18 different sizes. O-rings have a high chemical and temperature resistance alongside a low compression set.
  • ✔️MATERIAL: Rubber O Rings, built of high-quality Nitrile Butadiene Rubber (NBR) material for resistance against UV, lubricants and greases, Heat-resisting, mineral oil-resisting, wear-resisting, petrol, and hydraulic oil, useful for seals sink, remover water fitting. Temp. resistance low: - 90 °F Temp. resistance high: 250 °F.
  • ✔️100% MONEY BACK GUARANTEE. We made sure that this O Ring Kit meets the highest standard of quality but if for ANY reasons you are not satisfied, you will receive a refund. Click on "Add to Cart" button NOW and get this amazing new product..
Check Stock

Compatible with Compression Sleeve Puller(03943)-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

  • This Joywayus compression fitting is made of brass..
  • Connects to 4mm copper,brass,aluminum,or plastic tubing..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

VANICE Bike Freewheel Removal Repair Lockring Tool, Compatible with Shimano, Sunrace and Other 12 Spline Freewheels

  • Good Compatibility - Compatible with Shimano, Sun Race, Saches and other similar 12 spline freewheels. Not compatible with cassette lock rings.
  • High Quality - Heat treated alloy tool steel construction for a lifetime of use.
  • Easy To Use - Use any ½” drive ratchet or 21mm spanner wrench to rotate the tool (open end wrench, crescent wrench etc).
  • VANICE Professional and pratical bike bicycle freewheel remover tool. Thin wall construction allows use without removal of cones and locknuts.
  • CASSETTE OR FREEWHEEL? To determine the type of rear sprocket system you have, find the tool fitting on the sprocket set. Spin the sprockets backwards. If the fitting spins with the cogs, it is a cassette system. If the tool fitting does not spin with the cogs, it is a freewheel system.
Check Stock