Reviews Commercial Gate

Black Commercial Grade Stainless Steel Gate Hinges | NW38950NSSB | 2 Hinges Per Pack

  • Heavy duty powder coated stainless steel | For use with vinyl gates | Gate gap: 1/2 inch to 1-3/8 inch.
  • Connect to both the gate and the hinge post on two adjacent sides of the posts for added strength | UV Resistant.
  • Horizontally adjustable for a perfect fit | Fits square gate frames from 3.5 inches to 6 inches | Gate posts and frame must be square.
  • Made of commercial grade powder coated stainless steel | Hinges are rust and corrosion resistant | Low-maintenance: only require occasional adjustments.
  • Two hinges per package | Hinges for one gate | Large, heavy duty hinges for long-term use | Part Number: NW38950NSSB.
Check Stock

Electrodepot 433 MHz Unity Gain Omni, 6 Inches Antenna with Magnetic Base and Male SMA Connector Impedance 50 Ohms

  • Digi-Code 5166-03 Radio Receiver Remote Antenna Mounting Kit With 15' Coaxial Cable With F-Connectors, Antenna And Antenna Mounting Bracket. Ideal for use with radio receivers that have the F-connector type antenna typically used on gate openers when a remote antenna is needed to improve remote control signal reception and range..
  • Product Description: Remote Antenna Mounting Kit Ideal For Commercial And Gate Radio Receivers The Digi-Code 5166-03 also known as the DC-5166-03 remote antenna mounting kit is ideal for use with F-connector versions of gate radio receivers to improve signal reception and remote control range. This remote antenna kit allows the antenna to be located in more desirable location to increase the operating range especially with gate openers that use a metal cover, which tends to block the signal from.
  • Product Features: Works with all brands of radio receivers that use a standard F-connector type antenna. 15 feet commercial grade coaxial cable F-connector and rubber boot on each end 5 inch long by 2 inch L bracket with 2 mounting screw holes F-connector barrel connector on L bracket 10 inch whip type antenna with F-connector One-Year manufactures warranty.
Check Stock

Chain Link Fence Residential Double Gate Latch 1 3/8\ | Strong Arm Double Gate Latch for Swing Gates

  • Securely latch your residential chain link gate with this heavy-duty, commercial grade double latch.
  • Made from high-quality steel that has been hot-dipped galvanized to prevent rusting, this double gate latch is built to last.
  • This residential gate latch is built to fit 1 1/4" fence posts and 1 3/8" gate frames while also allowing it to be padlocked.
  • Is easy to install and can be horizontally adjusted.
Check Stock

Liftmaster / Chamberlain CSW24V Swing Gate Operator

  • LiftMaster has designed its own purpose built P3 motor to meet the exact requirements needed to open and close your gate. Heavy-duty commercial gear driven transmission provides unsurpassed reliability..
  • Access your property quickly with Security+2.0 Technology that utilizes a tri-band signal that virtually eliminates interference and offers extended range each time the remote control is used..
  • Confidently know what's going on at home with MyQ Technology. It lets you monitor and control your Gate Operator and lighting from anywhere (when paired with the LiftMaster Internet Gateway)..
  • 1 HP Rated for gates up to 22 feet in length and 2,000 lbs..
  • Heavy-duty commercial gear driven transmission provides unsurpassed reliability..
Check Stock

TOPENS RK2600T Automatic Sliding Gate Opener Industrial Commercial 1-1/4 HP Rack Driven Gate Motor for Large Slide Gates Up to 5700 Pounds and 40 Feet, Driveway Security Gate Operator with Gear Rack

  • 【POWERFUL OUTPUT】Featuring a SUPER STRONG 1-1/4 HP 1000W AC motor with greater start force and pulling force, TOPENS RK2600T Motorized Sliding Gate Opener is designed for heavy duty industrial commercial sliding gates up to a maximum of 5700 lbs. in weight and 40’ in length. The durable and reliable motor made by pure-copper wire brings a superior performance. The durable system provides a long operating life with minimum maintenance requirement..
  • 【POWER MODES】RK2600T Gate Opener is ONLY powered by AC 110-120V electricity. The power supply cord is NOT provided. TOPENS DK/DKC series sliding gate openers are recommended if you want to power your gate by batteries and solar system..
  • 【MULTIPLE PROTECTION & SAFETY】Reliable magnetic limit switch for easy adjustment. Adjustable self-close time (0/30/60/90s), max motor running time (90s), and microchip rolling code for remote keys. With the TC102 photocell beam (included), reverse in case of obstruction during gate closing. Equipped with manual release key in case of power outage or when you lose your remote..
  • 【WIDE APPLICATIONS】Suitable for all types of sliding gates, and perfect for driveway gates made by steel, wood, vinyl, and shaped as tube, panel, and chain-link. Typical application incl....
Check Stock

Eagle 200 1 HP Commercial Swing Gate Opener 20' & 1000 lbs Gate Capacity Free 2 Remotes, Receiver and EG111 Monitored Photo Eye Included

  • The Eagle 200 1hp is designed for Commercial Gate applications. The Remote Control Swing Gate Opener is meant for Large Gates up to 24’ feet or 1000 pounds..
  • Equipment – Equipped with a powerful 1 Horsepower continues motor 24v and Heavy gear reducers for quiet efficient operations. Installing made easy with Eagles Diamond Board. The diamond Board features like automatic open/close delay perfect for dual leaf gates..
  • Emergency – Quick Release Swivel Arm lever for manual operation. Simply pull up on the handle to operate the gate manually in case of a power outage..
  • Functions – The Single Arm Swing Gate operator is equipped with Eagles Long Range Chrome Receiver EG650 for wireless remote access. The receiver can handle up to 30 transmitters, making this Single Vehicular Swinging Gate Motor ideal for High Traffic Properties..
  • Package – Eagle-200 1HP Motor Gate, 2 Single button Gate Opener remotes, 1 Transmitters, Two 10ft nickel plated chain and 1 eye reflective sensor. We also provide our customers with a 5-year limited manufacture warranty. ATTENTION BUYERS: Please provid....
Check Stock

Eagle-1 Slide Gate Operator with 2 Wireless Remotes, Security Reflective Photo Eye Monitored, and Receiver – ½ HP Residential Home Slide Gate Opener – Easy to Install

  • The Eagle-I Slide Gate is designed for a residential use with the power of a commercial gate. The Automatic Slide Gate Operator is equipped with a 1/2 Hp motor for rolling sliding gates up to 18ft and 300lbs..
  • Package Includes – Eagle-I Slide Gate Operator, (2) 10ft Nickle Plated Chains, 2 Wireless Remotes, 1 Receiver, 1 Photo Eye Sensor. We also Supply a 5 Year Limited Manufacturing Warranty for residential users.
  • Easy to Install – With the professional installer in mind, the Eagle-I is designed with an AC Mini Diamond control board.
  • the most user-installer friendly control board in the industry that allows easy installation..
  • Safety – In case the Eagle slide gate operator fails, or a power outage occurs, the Eagle-I is equipped with a fail secure release crank. The user will be able to open the gate manually using the release crank. Also included is a built-in lighting and surge protection..
  • The Automatic Slide Gate Opener is designed with features such as user-friendly capabilities, open/close delay, motor brake, anti-tailgating, partial open, Stop-Reverse and auto close timer..
Check Stock

639T Allstar 9-Channel Commercial Door Control with Open/Close/Stop by Linear

  • Quantity: 1 (one) Linear 639T Open Stop Close Stationary Transmitter The Model 639T 3-Button, 9-Door, Open-Close-Stop, Stationary Transmitter is designed for commercial automatic door and gate operator applications. This transmitter can operate multiple receivers connected to multiple operators..
  • The transmitter has three buttons for Open, Close, and Stop commercial operator functions and a rotary switch to select which receiver/operator to control. The three operation pushbuttons have a surrounding bezel to shield them from accidental activation. The Stop button is colored red for easy identification. Up to nine 3-channel commercial door or gate receivers can be independently controlled by the 639T transmitter..
  • The Model 639T is compatible with 831R, 831RJ, MVP-3CH-24V-3T-4W, MVP-3CH-12V-8W-FC, MVP-3CH-24V-8W-FC, MVP-RE-24V-8W-FC, and MVP-MR 3-Channel receivers used in Open, Close, Stop applications..
  • Features Compatible with 3-channel Allstar and MVP receivers Stationary mounting Easy access to battery and coding switch Power: 9-volt battery Codes: 6561 (set by eight trinary dip switches) RF frequency: 318 MHz Dimensions: 3.625" W x 6.625" H x 2.375" D.
Check Stock

Lot of 2 LiftMaster 373LM 3-Button Remote Control

  • Program up to three Garage Door Openers or Gate Operators – with PURPLE Learn Button ONLY..
  • Safeguard your household with Security+®, which sends a new code every time you click your remote control..
  • Compatible with LiftMaster® Security+ Garage Door Openers, Gate Operators and Commercial Door Operators..
Check Stock

50ft Vehicle Sensor Wired Exit Wand

  • Compatible with all automatic gate operators, or other systems requiring a dry contact input device..
  • tomatically activates gate operators “Hands-Free” when a vehicle approaches.
  • Designed for residential, agricultural, and commercial applications..
  • Avoid the headaches associated with installing exit and entry loop detector systems, installs in 1/3 the time.
Check Stock