Reviews Cold Cut Metal Chop Saws

Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw Blue

  • cuts metal with minimal heat or sparks and doesn't require coolant.
  • 1800 watt / 15 amp motor with high torque gearbox.
  • reduces motor load and improves steel cutting performance.
  • faster cutting & long blade life averages 1000 cuts in 2 in x 2 in mild steel.
  • cuts metal with minimal heat and burrs, leaving a workable finish.
Check Stock

XtremepowerUS 2200W Cutting Chop Saw 15-AMP Power Saw Cuts (14\ inch Blade Included)

  • Multi-Material Cutting - XtremepowerUS saw will cut wood, wood with embedded nails, composite decking, mild steel, plastic & more with one blade.
  • Powerful Motor - High-torque 15 amp motor will easily cut through a variety of materials.
  • Fast & Efficient - Our Electric chop saw spindle lock allows quick and easy wheel changes.
  • Quick-release feature allows major adjustments in less time.
  • Powerful motor in our chop saws delivers precise cutting.
  • Durable & Flexible - Aluminum oxide abrasive cut-off wheel penetrates the toughest metal surfaces, including stainless steel and other ferrous alloys.
  • 14-inch chop saw also cuts steel, pipe, wood, and other dense materials.
  • V-Block Included - Clamping cylinder materials with the included V-Block ensures safe & clean cutting.
Check Stock

WEN BL1466 14-Inch 66-Tooth Carbide-Tipped Professional Metal Saw Blade for Mild Steel Cutting

  • Featuring a 14-inch diameter (355 mm), a 1-inch arbor (25.4 mm), and a rating of up to 1450 RPM.
  • Perfect for dry-cutting through steel and metal, including pipes, tubes, angle iron, and other ferrous metals.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 66 carbide-tipped teeth for general-purpose mild steel cutting.
  • Compatible with 14-inch dry-cut metal saws, chop saws and circular saws.
Check Stock

WEN BL1490 14-Inch 90-Tooth Carbide-Tipped Professional Metal Saw Blade for Thin Steel Cutting

  • Featuring a 14-inch diameter (355 mm), a 1-inch arbor (25.4 mm), and a rating of up to 1450 RPM.
  • Perfect for dry-cutting through steel and metal, including pipes, tubes, angle iron, and other ferrous metals.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 90 carbide-tipped teeth for general-purpose mild steel cutting.
  • Compatible with 14-inch dry-cut metal saws, chop saws and circular saws.
Check Stock

Lackmond LSE - Metal/Ductile Saw Blade - 14 Steel Cutting Tool with Vacuum Brazed Diamond Tip & 20mm Arbor - LSE1412520

  • SEGMENTED CONFIGURATION – Ideal to use on ductile iron. The blade gullets aid in airflow and heat dissipation.
  • VACUUM BRAZED DIAMONDS – The diamond rim and steel core ensure the LSE series blades cut fast and have a long lifespan.
  • EXPERT DESIGN – Great for cutting metal, stainless steel, ductile iron, rebar, PVC, fiberglass, and more.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws. Can be used wet or dry.
Check Stock

Lackmond LSE - Metal/Ductile Saw Blade - 16 Steel Cutting Tool with Vacuum Brazed Diamond Tip & 1 - 20mm Arbor - LSE161251

  • SEGMENTED CONFIGURATION – Ideal to use on ductile iron. The blade gullets aid in airflow and heat dissipation.
  • VACUUM BRAZED DIAMONDS – The diamond rim and steel core ensure the LSE series blades cut fast and have a long lifespan.
  • EXPERT DESIGN – Great for cutting metal, stainless steel, ductile iron, rebar, PVC, fiberglass, and more.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws. Can be used wet or dry.
Check Stock

Benchmark Abrasives 6\ Aluminium Oxide Quality Thin Cut Off Wheel for Metal and Stainless Steel .045\ Thick 7/8\ Arbor, Angle Grinder Wheel, Grinder Cutting Wheel - 25 Pack

  • Benchmark Abrasives metal cutting wheel with a 6" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication..
  • Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness..
  • Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (11000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost..
  • The ideal grinding wheel support angle and die grinders, high-speed saws, stationary saws, and chop saws. Made of high-speed steel material for solidity and efficient cutting..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Benchmark Abrasives 4-1/2 Aluminum Oxide Quality Thin Cut Off Wheel for Metal and Stainless Steel 7/8 Arbor Fiberglass Iron Cutting Wheel Use with Grinder - 50 Pack

  • Benchmark Abrasives metal cutting wheel with a 4-1/2" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication..
  • Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness..
  • Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (13,000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost..
  • The ideal grinding wheel support angle and die grinders, high-speed saws, stationary saws, and chop saws. Made of high-speed steel material for solidity and efficient cutting..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives 5\ Aluminum Oxide Quality Thin Cut Off Wheel for Metal and Stainless Steel 0.045\ Thick 7/8\ Arbor, Angle Grinder Wheel, Fast Burr-Free Cutting Wheel - 50 Pack

  • Benchmark Abrasives metal cutting wheel with a 5" diameter and a 7/8" arbor is used for cutting metal, steel, metal pipes, tubes, flat sheets, shipbuilding, rail, and general metal fabrication..
  • Type 1 cutting wheels are completely flat and suitable for grinding operations. They provide consistent sharp, burr-free cutting with no loss of hardness..
  • Professional cut-off wheels are suitable for various cutting operations on stainless steel, steel, aluminum, and various other metals. This highly efficient cutting wheel delivers smooth cuts (12000 RPM) and lower vibration during operations. It ensures a high cutting rate at a lower cost..
  • The ideal grinding wheel support angle and die grinders, high-speed saws, stationary saws, and chop saws. Made of high-speed steel material for solidity and efficient cutting..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Concord Blades WCB1400T120HP 14-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

  • Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
  • For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
  • Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
  • 3.0 mm kerf design, ATB Grind & 15Degree hook.
Check Stock