Reviews Cnc Machined Pulley

Zigco LLC SpinRX - Tangle Proof Swivel Pulley - Boat Anchor Pulley - Anchor Pulley for Drift Boat - Pulley Block - Made in USA

  • CNC MACHINED. CNC machined boat anchor pulley from solid, aerospace-grade aluminum. The SpinRx is machined (not cast) which increases the overall durability and strength of the product. This product is designed to last and is able to withstand the abusive environment that an anchor is subjected to..
  • HARD ANODIZED. The SpinRx is hard anodized for better corrosion and wear resistance. Anodizing hardens the surface of the aluminum which makes our product bomb proof. This product is both lightweight and extremely durable..
  • ALL STAINLESS STEEL HARDWARE. The SpinRx incorporates all stainless steel hardware which allows the product to be used in both fresh and salt water environments. The stainless steel hardware combined with the anodized aluminum components prevents corrosion and increases the life of the SpinRx. This product will not rust!.
  • SEALED BALL BEARINGS. The SpinRx contains two sealed roller bearings which allow the anchor to spin independent of the anchor rope. These roller bearings are sealed, keeping out dirt and sand, and require no lubrication over the lifetime of the pulley. These bearings are high quality, stainl....
Check Stock

THIS STRANGE ENGINE (2 LP GATEFOLD SLEEVE)

  • 【Durable】 Gas Engine Pulley Adapter is made from cold rolled steel, CNC precision machined and tumbled, high durability..
  • 【Size】The adapter is approximately 3 inches long and includes the step key needed to go from the 1 4 in key way to the 3 16 key way..
  • 【Function】 Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • 【Package List】 One adapter and keyway included, the wider portion of the key sits in the adapter..
  • 【Good After-Sales Service】 If you have any questions, please contact us in time, we will reply you and solve the problem within 24 hours.
Check Stock

Discovery Bay Marine Gear Premium Schedule 40 Crab Pot Puller Davit Package

  • Schedule 40 aluminum provides 150 lbs. lifting capacity.
  • 2 piece design allows for easy storage and transporting.
  • Upgraded Premium UHMW sleeved mounting brackets.
Check Stock

TUPARTS PTO Clutch Assembly for Warner:5217-33, 5217-53, 5217-34, 5217-44, 5217-48, 5217-77; for ARIENS:00617400, 03292300; for Hustler:601801, 601801K 5217-33 Lawn Mower Clutch.

  • Encapsulated with tough thermoplastics coil bobbin could protect coil assembly from hard working conditions.
  • High performance sealed ball bearing with high temperature grease withstand Low and High temperature to ensure a longer service life..
  • CNC machined pulley offering much stonger and smoother then conventional pulley to maintain a more stable and faster blade speeds..
  • Super Tough stainless steel rivets instead of copper or aluminium rivets to ensure a longer service life..
Check Stock

Discovery Bay Marine Gear Premium Heavy Duty Schedule 80 Crab Pot Puller Davit Package

  • Heavy duty schedule 80 aluminum provides a 200 lbs. lifting capacity.
  • 2 piece design allows for easy storage and transporting.
  • Upgraded premium UHMW sleeved mounting brackets.
Check Stock

ZRM&E 5PCS 20 Teeth 5mm GT2 Timing Belt Pulley for Width 6mm 3D Printer Parts Accessory

  • Type: 5pcs GT2 Timing Belt Pulley, Come with 1 hex wrench, and matched M4 fastening screw, which has been already screwed in the pulley..
  • High Quality: Adopt high quality aluminum, excellently machined, finished smoothly, durable to use, perfect choice for 3D printer or similar projects..
  • Specification: 20 teeth, 5mm inner bore, 16mm height, fit for 6mm width GT2 timing belt and 5mm shaft stepper motor..
  • Special Design: Rounded teeth can engage with belt longer, flange design admits synchronizing shaft rotations, provides a smoother and high power transmission..
  • Application: Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions..
Check Stock

Saiper GT2 16 Teeth 5mm Bore Timing Pulley Aluminum Synchronous Wheel for 6mm Belt, Compatible with RepRap 3D Printer Prusa i3 (5pcs)

  • Teeth: 16T, Bore Diameter: 5mm. Total size: 14*14*14mm.
  • Synchronous Wheel made of high quality Aluminum Alloy, excellently machined, finished smoothly and longer service life.
  • Contact with the 16 tooth side which minimizes the risk of the belt slipping. Applies to 6mm width belt!.
  • GT2 16 Teeth Timing Pulley providing a smoother transition between belt, good performance for 3D printers.
  • GT2 timing belt pulley system especially suited for linear movement and positioning. Widely used in 3D printer, milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
Check Stock

VMS Racing 90-01 VMS Racing Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Honda Acura Integra including GSR and Type-R 1990-2001

  • [ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
  • Weight = 9.8 OUNCES!!! Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
  • CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
  • Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
  • Compatible with Fitment on Honda B16 B18 B20 (DOHC Engines) 90 91 92 93 94 95 96 97 98 99 00 01 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 (IMPORTANT - will NOT fit B20A engines). Please note. This pulley WILL disable your A/C and may require a shorter belt depending on your application..
Check Stock

Harmonic Balancer Engine Crankshaft Pulley Ka24E Febest NDS-KA24E Oem 12303-86G0A

  • [ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
  • Weight = 15 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
  • CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
  • Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
  • Compatible with Mazda Miata 1.8 L .8L Liter Litre BP-4W BP4W Mazdaspeed MX5 MX-5 Turbo Turbocharged Roadster 99 00 01 02 03 04 05 1999 2000 2001 2002 2003 2004 2005 CP549 performance engine swap.
Check Stock

3/4\ Parallel Crankshaft Crank Fits Honda GX160 5.5HP QX QH Engine 196cc 212cc Go Kart

  • [ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
  • Weight = 1 pound 15 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
  • CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
  • Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
  • Compatible with 99-00 Honda Civic Si w/ DOHC (B16A2) 96-97 Honda Civic Del Sol w/ DOHC (B16A3) 94 95 96 97 98 99 00 01 Integra including GSR & Type-R (B18B1 B18C1 B18C3 B18C5) and 1997 1998 1999 2000 2001 Honda CRV (B20Z & B20B require different sized belts)..
Check Stock