Reviews Clutch Thrust Plate - BestBuyersPro.com

Four Seasons (47654) A/C Clutch Assembly

Feature: The three main parts of the compressor clutch assembly are the coil magnet, the pulley, and the clutch plate. The clutch drive plate is splined to the input shaft of the compressor..
Package Included: 1 x Pulley With Bearing.
(Professional Installer is Highly Recommended ).
Pulley Assembly Width:10.4cm,Height:2.8cm.
Part#: 140162C,7511699,10759C,F09OGBC003,5511699,6511699.

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.

Scope of application: Clutch Hub Plate is suitable for CVC. OE: 5N0820803. Detailed application model, please check carefully before buying..
high quality materials: Clutch Hub Plate is made of high quality stainless steel, which is more wear resistant and durable. Professional manufacturing, high performance..
Professional design: Clutch Hub Plate is manufactured in accordance with standard specifications and strictly follows factory quality control..
Easy to install: Clutch Hub Plate is easy to assemble and disassemble. A professional installation is strongly recommended to avoid trouble or damage..
Product packaging: 1 x CVC Automotive Air Conditioning Plate, 3 x Short Screws, 1 x Long Screw..

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.

Made to be the most reliable tools in the market today.
Tool set for aligning clutch components when installing a new clutch.
Aligns clutch plate and disc to pilot bearing.
Includes tapered cone clutch plate adapter and centering shaft.
Adapters included: 1.18/0.984-Inch, 17/15mm, 15.8/12mm, 0.874/0.812-Inch, 0.787/0.749-Inch, 0.718/0.668-Inch, 0.624/0.614-Inch and 0.590/0.561-Inch.
Kit 21 includes 8-Piece for aligning clutch components when installing a new clutch.

【APPLICATION】B A/C Compressor Clutch Remover Installer Puller Tool Kit, is used to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors and fit for GM, fit for Ford, fit for Chrysler, imports, and others.
【EASY TO USE】Keep all threads clean and well-oiled.
Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads.
【HIGH-QUALITY】A/C Compressor Clutch Remover is made of stainless steel with a black coated finish, durable and long lasting.
Resists rust and corrosion under proper care and lubrication.
【PACKAGE INCLUDED】This kit includes puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
【CARRYING CASE】Comes with a carrying plastic carrying case for easy organization, storage, and transport.

【High-quality material】A/C Compressor Clutch Hub Plate,Made of high-quality rubber and metal materials, it is durable, corrosion-resistant and oxidation-resistant. The sturdy material makes it more stable and durable after installation..
【Applicable accessories】The air-conditioning compressor clutch hub is made according to the component structure of the specific vehicle model. It can be a good replacement for 6SEU 6SEU14A 6SEU14C 7SEU 7SEU17C and other series models. Please confirm the model before you buy, so that it can bring you good use Experience..
【High reliability】AC Compressor Clutch Plate,Manufactured in accordance with standard specifications, strictly following the quality control of the original workshop and factory, and after repeated installation and te....

Good Compatibility: A must have if you are buying the Renegade Blade. Helped out with fitting to weed trimmer. Perfect kits for your S-tihl String Trimmer. Conveniently to Use. Not OEM part..
Gardening Machine Lawnmower Kit Size: Screwdriver size: 128 mm/ 5.0inch, Rider plate diameter: 80 mm/ 3.15 inch, Collar Nut Diameter: 25 mm / 0.98 inch, Thrust Washer Diameter: 45 mm/ 1.7 inch. Please Do Check The Size of Adapter Kit before placing the order..
Easy to Install: Easy to replace the string spool on the trimmer with the s-tihl adapter kit. Fit tight and there was very little vibration.Adapter Attachment Washer Plate Maintenance Kit Replacement for String Trimmers.
Package include: 1 x Thrust Washer,1 x Rider Plate,1 x Collar Nut,1 x Screwdriver.

The articulated joint allows the blade to pivot and the entire blade is able to generate thrust. Pivot control technology ensures the most efficient angle of attack is maintained no matter how hard or softly you kick, generating thrust without drag or wasted energy.
Clean water blade geometry for optimum propulsion. Water is free to flow onto the working section of the blade, drag is reduced and thrust increased.
Variable pivot control ribs insures that the most efficient angle of attack is maintained across all strengths of kick. | Ergonomic foot pocket with extended heel plate insuring ultimate power transmission with less leg strain.
Durable Monprene construction making SeaWing virtually indestructible. | Wing tips arc upwards, increasing high-speed stability..
Marine quality bungee heel strap with custom adjustment system for total comfort and convenience.