Reviews Chip Tunning Interfaces

BIGTREETECH SKR PICO V1.0 Control Board: Mini Controller Board with TMC2209 UART Stepper Motor and Raspberry Pi Online Printing for Voron V0 V0.1 3D Printer Parts

• 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
• 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
• And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V..
• 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing..
• 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion.
• at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer..
• 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port..

Hagibis USB-C Hub with Dual Hard Drive Enclosure, Type-C Docking Station for Mac Mini, Mac Studio M1 Max Ultra with 2.5inch SATA, M.2 NVMe NGFF, USB 3.1 Gen2, USB-C, SD/Micro SD, 2 USB 3.0 (MC25 Pro)

• Good partner for Mac Mini: This Hub has multiple interfaces to meet multiple needs. Same size, alloy material, plug and play, light, solid, fast heat dissipation, more suitable for your Mac Mini.
• Dual Hard Drive Enclosure Design: Compatible with M.2 (NVMe / NGFF) and 2.5inch (Mechanical / Solid State) hard disk (Hard disk within 10mm), support dual hard disk read and write at the same time. * When two hard drive enclosure work together, please connects USB-C (B) for power supply.
• Multiple interfaces: Hagibis Mac Mini Dock with M.2 NVMe/NGFF, 2.5inch SATA hard drive enclosure, 10Gbps USB3.1 Gen2, 10Gbps USB-C, 2 5Gbps USB3.0, SD/Micro SD card slot. Various interfaces meet all your needs.
• Good News for Camera Fans: Fast read and write SD/TF card, support dual card reading and writing at the same time.
• High Speed Transmission: 10Gbps to transmit 1G large files only need 1 second. *Due to the limitation of Apple M1 chip, the reading and writing speed is lower than that of non M1 chip computer.

Desktop PC Motherboard,DDR4 Motherboard for AMD A520,Micro-ATX Dual Channel,6 Channel Audio,PCI E X16/PCIE X1/USB 3.0/USB2.0/SATAIII/HDMI/M.2/VGA/AMD/AM4

• Adopt optimized network card chip to further take advantage of high‑speed network and reduce game delay.
• Intelligent real-time monitoring of hardware frequency, temperature, speed, voltage, etc., players can know the status of the host at any time.
• Equipped with SATA/Nvme M.2 slot, bringing faster data reading and writing, game loading experience for players.
• Multiple expansion interfaces, providing standardized PCIE3.0, USB3.0, SATA3.0 interfaces, and six USB interfaces at the rear.
• The motherboard is equipped with dual-channel DDR4 memory slots, PCIE X16 slots and PCIE 1X expansion slots.

SinLoon SCA 80 Pin to 68 SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (68/80)

• Product Name: SCSI Card 68-80 SCSI hard disk adapter 68 Pin Female to 80 Pin Male (SCSI 80 pin, 68 pin adapter).
• SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 80 pin interface to 68 pin interface. In this way, 80 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
• SCA 80 Pin to 68. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
• The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
• Product category: chip level maintenance tools - hard disk maintenance tools - hard disk other tools..

Ableconn PEX-SA156 6-Port SATA 6G PCI Express x4 Host Adapter Card (ASMedia ASM1166 Controller)

• Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0.
• Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0..
• PCI-Express X4 interface, chip signal is 2X, compatible with PCI-Express X4 /X8 /X16 slot. (It is recommended to use faster under PCI-E 3.0)Powerful chip: ASMedia ASM1166 chip, heat sink, long-lasting high temperature resistance, high speed and stable transmission..
• Supports up to 10 SATA3.0 interfaces,Compatible with SATA6G,3G and 1.5G hard drive，Supports communication speeds of 6Gbps,3Gbps,1.5Gbps.
• No driver required, support hot swap, system support: Windows/8/10/Ubuntu/Linux,Note: MSI X470 and X570 are not compatible with this card.

YSBZChu USB Type C to 3.5mm Headphone and Charger Adapter, 2-in-1 USB C to Audio Jack Hi-Res and Fast Charging Dongle Cable Compatible with Phone,Headphone,Laptop (Black)

• Interfaces include Type-C and 3.5mm interfaces..
• Plug and play, no other operations are required, and the connector can be easily inserted after confirming the connector orientation..
• Tinned copper core and high-quality chip, more stable charging transmission..
• Support charging while listening to music without worrying about any interface..
• The 2-in-1 data cable supports simultaneous charging and audio output, allowing you to listen to music while charging..

Adaptec RAID 71605 Storage Controller 2274400-R

• ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
• ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
• ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
• ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
• ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.

TERRAMASTER TD2 Thunderbolt 3 Professional-Grade 2-Bay External Hard Drive Enclosure RAID 0/RAID1/JBOD Hard Disk RAID Storage (Diskless)

• Portable design for professionals especially those with strict speed and safety requirements, including 4K video editing. Starting from March 26th, 2021, Mac with M1 security chip was fully supported..
• Two 40Gbps Thunderbolt 3 interfaces, reading speeds up to 760MB/s (with SSHD in RAID 0). Compatible with 3.5" and 2.5" SATA HDD, 2.5" SATA SSD..
• Hardware RAID: RAID0, RAID1, JBOD, SINGLE.
• Support up to 40TB storage capacity (20TB x 2, in RAID 0).
• Capitalising on the Thunderbolt 3 and DP interfaces, the TD2 Thunderbolt 3 supports multi-screen display with up to 3 screens..
• Power delivery provides up to 15W of power to recharge compatible laptops (Mac only, Windows not supported). Aluminum-alloy shell, 80mm fan ensures great heat dispersion..

Stay in tune - Guitar tuner

Strikeforce Kool Fit Plus Bowling Positioner (Large, Right)

• Great for forming fine tunning you thumb and finger holes.