Reviews Chip Breaker Type Drill

SD-200SA Square D Generator Interlock Kit for Homeline Meter Main 150 or 200 amp Breaker

  • Generator Breaker Interlock for Square D QO or Homeline Indoor or outdoor with main 100 or 125 amp panels.
  • 3/4 spacing between main and branch breakers.
  • Kit includes Interlock, labeling, drill bit and generator breaker retainer strap.
  • PLEASE Verify panel type by checking second picture.
Check Stock

22PCS Self Centering Drill Bit Set, Door Window Cabinet Hinge Hardware Drill Bits, 10 Tapper Core Hole Puncher with 10 Replacement Drill Bits & Hex Key & Center Punch

  • 22PCS CENTER DRILL BIT SET: You will get 10 x center drill bits, 10 x replacement drill bit, 1 x hex key, 1 x center punch, perfect match to meet any of your work needs.
  • SIZE OF BITS: Hinge drills come in 8 different sizes: 2 x 5/64', 2 x 7/64'', 2 x 9/64'', 11/64'', 13/64'', 5mm and 1/4", each drill bit corresponds to a shell, and the size is marked on the shell, which is easy to distinguish and convenient to use.
  • MATERAIL: Center drill is made of high speed steel drill bit & quenching treatment shell designed, wear-resistant and durable, anti-rust and anti-corrosion, long service life.
  • MULTIFUCTION: Center Drill bit perfect for hinges, handles, drawer slides, woodworking . Suitable for professionals and woodworking enthusiasts.Center punch for precise positioning in a variety of materials, which can be used as an awl for belts or glass window breaker for car safety.
  • EASILY REMOVE CHIPS: Sawdust will be automatically discharged from the top of the holes on both sides, the drill will not be blocked, and can be used with confidence, eliminating the time for manual chip removal and speeding up the work progress.
Check Stock

Hegebeck Carbide Hole Cutter, 22mm Carbide Hole Saw Tipped Tooth Round Hole Saw Drill Bit for 5mm Stainless Steel, Metal Plate, Iron, Aluminum

  • 【Parameter】- Hole Diameter: 22mm / 0.87inch.
  • 【Material】- Adopt carbide material, longer lasting performance, unique cutting-edge grinding technology, sharp and wear-resistant, not easy to break, drilling high efficiency and fast chip removal, extremely long service life..
  • 【Feature】- Fast cutting and chip removal, arc-shaped chip pocket design, conducive to the smooth discharge of iron filings, reducing chip jamming, and conducive to chip holding at the limit cutting depth.
  • Pilot drill spring design, control the displacement of the cutting edge, avoid damaging the drill bit by sudden cutting..
  • 【Wide Application】- Used with power drill, magnetic drills, benchtop drills to quickly and accurately cut stainless steel, sheet metal, cast iron, mild steel, aluminum.
  • Prohibit the use of ceramic tile, concrete, walls, stone..
  • 【Warm Tips】- Keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm..
Check Stock

EAT-CH200XA Eaton or Cutler Hammer Generator Interlock Kit Vertical Throw Main 150 or 200 amp Panel Generator Interlock Kit

  • Fits Cutler Hammer Vertical throw main 150 or 200 amp.
  • 2 1/4 inch spacing between main and branch breaker.
  • Kit includes, Interlock, drill bit, labeling and retaining strap for generator breaker.
  • PLEASE Verify panel type by checking second picture.
Check Stock

Hegebeck Carbide Hole Saw 3/4' Hole Cutter Carbide Tipped Tooth Round Hole Saw Drill Bit for Stainless Steel Metal Plate Iron Wood and Aluminum

  • 【Specifications】: Hole Diameter: 19mm / 3/4inch.
  • 【Material】: Adopt carbide material, longer lasting performance, unique cutting-edge grinding technology, sharp and wear-resistant, not easy to break, drilling high efficiency and fast chip removal, extremely long service life.
  • 【Features】: Fast cutting and chip removal, arc-shaped chip pocket design, conducive to the smooth discharge of iron filings, reducing chip jamming, and conducive to chip holding at the limit cutting depth.
  • Pilot drill spring design, control the displacement of the cutting edge, avoid damaging the drill bit by sudden cutting.
  • 【Applications】: Used with power drill, magnetic drills, benchtop drills to quickly and accurately cut stainless steel, sheet metal, cast iron, mild steel, aluminum less than 2mm.
  • NOTE: Prohibit the use of ceramic tile, concrete, walls, stone.
  • 【Guarantee】: We promise provide satisfied service for every client, if you have any question with the product, please contact us in time, we will solve the problem for you in 24 hours.
Check Stock

SQD100A Square D Generator Interlock Kit QO and Homeline - Anodized

  • Generator Interlock Kit for Square D 150 or 200 amp Meter Main.
  • Kit includes Interlock, drill bit, labeling and retaining strap for generator breaker.
  • PLEASE Verify panel type by checking second picture.
Check Stock

Q2125 125-Amp Double Pole Type QP Circuit Breaker

  • This 30-20 amp double breaker is a twin single-pole tandem type breaker that works with 120 volts and has a 10,000 AIC interrupting rating..
  • With ground fault equipment protection, this breaker is suitable for use in Siemens panels that allow CTL type breakers..
  • This RV circuit breaker accepts #14-6 AWG or #14-6 Al wire and is thermal-magnetic. HACR SWD rated and UL listed, this circuit breaker is a standard trip interruption type..
Check Stock

Millie Masonry Drill Bit Sets-Concrete Drill Bit Sets for Tile, Brick, Cement, Concrete, Plastic, Cinder Block, Glass,Wood,Etc, Industrial Strength Carbide Tips. (10 Pieces/Black)

  • MULTI-MATERIAL DRILL BITS - Easily Drills through Ceramic Tile, Glass, Cinderblock, Hard Plastic, Cement, Concrete, Mirrors, Windows, Travertine, Brick, Wood, and So Much More!.
  • High-quality Materials - Made of high-quality steel, all of which are made of high-quality carbon steel after heat treatment. It has a variety of properties such as durability, rust resistance, and new scientific spiral chip removal space design to speed up chip removal and improve work. Efficiency saves time and effort.
  • FEATURES - The drill bits openings are neat, smooth, and free of smashed edges will not cause tremors easy positioning can increased opening speed.
  • U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill..
  • INCLUDES THE FOLLOWING SIZES - The set has six different sizes: (10pcs)1/8-80mmx2 ,1/4-100mmx2 ,1/4-150mmx2 ,5/16-150mmx1 ,3/8-150mmx2,1/2-150mmx1 1 x Transparent plastic box, provide you with different needs.
  • WIDELY USAGE - Drill bits set is perfect for drilling in all kinds of materials inlcuding ceramic tile, concrete, tile, brick, wood, plastic, glass, masonry, and more. Note: When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication..
Check Stock

Makita D-59178 18 Pc. Assorted Drill Bit Set

  • OUR ADVANTAGE COMPARED TO OTHER DRILLS：Compared with ordinary drills, JOERIC 's drills are harder and longer than ordinary triangular drills. The positioning of alloy cross-heads is also more accurate. Black electroplated drills are not prone to rust..
  • SMOOTH HOLE: Position drill by making slight dent with the tip before drilling. Small incision resistance. Feature drilling stably, opening neat, smooth, no broken edges, no tremor phenomenon, chip easily..
  • HIGH QUALITY－Carbide with a reinforced head that prevents bit cracking and provides a longer lif..
  • EASY TO EVACUATE CHIPS :U type slot design with fast drilling dust remove,1/4 Hex shank allows drill bit to be held tightly and stably in power drill..
  • PACKAGE INCLUDES:10Pcs masonry drill bit with 5 different sizes 3pc 3/16” (5mm), 3pc 1/4” (6mm), 2pc 5/16” (8mm).
  • 1pc 3/8” (10mm) and 1pc 1/2”(12mm) for various purposes, to meet the daily needs of your work..
Check Stock

Connecticut Electric UBITBA120L-New Challenger MH120-L Type A Replacement One Pole Left Clip Circuit Breaker.

  • Replacement Challenger MH120-L Type A circuit breaker manufactured new by Connecticut Electric.
  • For use in Challenger Type A circuit breaker panels.
  • Intertek ETL Listing to UL Standard 489-Molded case circuit breakers.
  • 120 VAC 1 Pole breaker 1/2" thin type breaker.
  • May also be branded: Murray, Crouse-Hinds, or Sylvania.
Check Stock