Reviews Chest Lid Stay

Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs (APFFSY)

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required..
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance..
  • EASY TO INSTALL【 Important：Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°,90°,110°. It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！.
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the....
Check Stock

Buyers Products 1712240 Buyers Products-1712240, Black Poly, Cubic Feet all-purpose chest, 6.3 cu. ft

  • All Purpose Chest: Your items will stay secure in this dent-resistant polyethylene chest with a double-wall hinged lid.
  • Get increased durability in a lightweight chest that is also rust-resistant.
  • Specs: The chest is designed to mount securely to your trailer frame.
  • It helps protect its contents from weather and theft with a double-wall lid and a hinge with zinc-plated hasp that fits standard padlocks.
Check Stock

Toy Box Hinges Soft Close - Lid Support Hinges (Pack of 2), Safety Soft Close Hinges for Chest Toy Box, Slow Close Hinges,Lid Support Soft Close 105 Degree Open (APFFSY)

  • GENTLE SLOW CLOSE HINGES — It's heavy lid hinge and soft close lid support. Expecially excellent slow close and safety solution on chest hinges, toy box hinges. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of children!.
  • KEEP LID STAY OPEN — The lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage as slow close hinges for toy box hinges, chest hinges, also fit for overhead kitchen cupboard, wardrobe lids too！.
  • SMALL COMPACT DESIGN — The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle. Perfect for any lids or flaps when lid support soft close is required..
  • EASY TO INSTALL — The safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75°-105° adjustable opening angles, depending on actual situation. It can fit for most lids.
  • REFUND GUARANTEE — If you are not satisfied w....
Check Stock

Heavy Duty Lid Support Hinges Soft Close Folding Lid Stay Hinge, Keep Lid Hinge Open, Perfect for Cabinet, Kitchen, Wardrobe Toy Chamber Max Support 50lb/2pcs

  • LID SUPPORT HINGE USAGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required..
  • KEEP THE LID OPEN— The lid hinge will hold the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • WEIGHT CAPACITY 50LB—Lid stay max weight support 50lbs/2pcs, Lid support hinge can be mounted on the left or right side. , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

Heavy Duty Hinge with Soft Close 50lb/2pcs Folding Lid Stay Hinge for Cabinet, Kitchen Wardrobe Toy Chamber

  • WIDE USAGE LID SUPPORT HINGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • KEEP THE LID OPEN — The lid hinge will hold the lid open until you want to close. Never worry about having to support the lid anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • WEIGHT CAPACITY—Max weight support 50lbs/2 pcs, Lid support hinge can be mounted on the left or right side..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. You will get 2pcs lid stays, Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

Douper Toy Box Hinge Soft Close Lid Support Hinge 25lbs-50lbs/ 2pcs Bearing Capacity Safety Hinge Chest Lid Slow Close Do Not Slamming Shut Pack of 2

  • LID STAY WITH SOFT CLOSE - Excellent safety solution for toy box, chest trunks and kitchen cabinets, your lids will lower slowly and gently to avoid....
  • 25lbs – 50lbs WEIGHT CAPACITY RANGE – Douper soft close lid support hinge can support lid weight from 12lbs to 25lbs and lower gently.
  • 90 DEGREE OPEN ANGLE - The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 90 degrees....
  • ONLY TAKES 5 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video.
  • WARM TIPS -- Douper hinges will not applicable with the lid at width more than 50in and height over 25inches..
Check Stock

CRAFTSMAN Tool Chest with Drawer Liner Roll, 26-Inch, 4 Drawer, Black (CMST82764BK)

  • The CRAFTSMAN 3-drawer portable tool chest is exactly what you need to store your most-used hand tools. The durable steel chest that can easily be transported to your jobsite. Tools stay organized and easy to find in three shallow drawers and a deeper storage area under the lid..
  • Heavy-duty steel construction is built to last.
  • Drawers help organize hand tools by storing them in one neat layer.
  • 25 lb. full-extension steel drawer slides.
  • Extra storage under the lid holds larger hand tools.
Check Stock

Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors

  • LID STAY HINGE ROTATE ONE WAY TO LOCK LID OPEN- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on..
  • SOFT CLOSE SAFETY HINGE -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70°..
  • WEIGHT CAPACITY– 25-50lb Lid support hold 12lbs-22lbs/1pc. 2 hinges support 25-50lbs..
  • DURABLE HEAVY DUTY HINGE--Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical..
  • EASY TO INSTALL ONLY 5 MINUTE–Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions..
Check Stock

Toy Box Hinges Soft Close - APFFSY Lid Support Hinges, Safety Soft Close Hinges for Chest Toy Box, Slow Close Hinges (Pack of 2) Lid Support Soft Close 105 Degree Open

  • GENTLE SLOW CLOSE HINGES — Hinges for wooden box and soft close lid support. Especially excellent slow close and safety solution on chest hinges, toy box hinges, locking hinges..
  • KEEP LID STAY OPEN — The lift and up hinges will hold the lid opened until you want to close. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of kids. Good gift fit for the kids' toy box and chest. It's widely usage as slow close hinges for toy boxes, chest hinges, also fit for overhead kitchen cupboard, cabinet hinges too..
  • SMALL COMPACT DESIGN — The lid closer compact design allows for installation in tight fit areas, and the lid to open at a maximum 105 degree angle. Weight Capacity: 6-12lb/1pc, 15-25lb/2pcs. Perfect for any lids or flaps when lid support soft close is required..
  • EASY TO INSTALL 【 IMPORTANT：Refer to our install video ! 】 — The safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75°-105° adjustable opening angles, depending on actual situation. It can fit for most lids..
Check Stock

Toy Box Hinges Soft Close - APFFSY Lid Support Hinges, Safety Soft Close Hinges for Chest Toy Box, Slow Close Hinges Lid Support Soft Close 105 Degree Open (Pack of 1)

  • GENTLE SLOW CLOSE HINGES — It's hinges for wooden box and soft close lid support. Especially excellent soft close and safety solution on chest hinges, toy box hinges, locking hinges...
  • KEEP LID STAY OPEN — The lift and up hinges will hold the lid opened until you want to close. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of kids. Good gift fit for the kids' toy box and chest. It's widely usage as slow close hinges for toy boxes, chest hinges, also fit for overhead kitchen cupboard, cabinet hinges too..
  • SMALL COMPACT DESIGN — The lid closer compact design allows for installation in tight fit areas, and the lid to open at a maximum 105 degree angle. Weight Capacity: 6-12lb/1pc, 15-25lb/2pcs. Perfect for light lids or flaps when lid support soft close is required..
  • EASY TO INSTALL 【 Important：Refer to our video ! 】 — The safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75°-105° adjustable opening angles, depending on actual situation. It can fit for most lids..
Check Stock