Reviews Lid Support Stay

RUYUFE Lid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Easy to Install

  • STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight....
  • LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
  • EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the....
Check Stock

MIAO JIN Lid Stay Lid Support 105 Degree Open with Soft Close Cabinet Hinges for Toy Box and Upward Top-Opening Flap Doors Easy Close Hinges

  • Material: The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19....
  • Lid stay slow closing：Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • Keep lid hinge stay opening：Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to....
  • The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree. Each hinge....
  • Package include: Each package has 1 Pack ..
Check Stock

Toy Box Hinge Soft Close, Lid Stay 105 Degree Open--Zishengho Lid Support Hing for Toy Chest and Upward Top-Opening Doors, Safety Easy Installation

  • LID STAY 105 DEGREE WITH SOFT CLOSE- Safety & easy to solution for toy box lid and kitchen cabinets, your lids will soft close and gently to avoid smashing fingers. 1pc lid stay support the range of door weight 6-10 lbs, Height 18-19 inch. 2 pcs hinges support 10-20lbs..
  • KEEP LID HINGE STAY OPENING- Never worry again about having to prop the lid open. This lid support can hold the lid open until you are ready to close. This lid stay is deal for Top opening or upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box..
  • EASY TO INSTALL TOY BOX HINGE- Only takes 5 minutes to complete the installation of lid hinge by following the installation measurement. Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting..
  • COMPACT DESIGN OF LID STAY HINGE- The compact design allows for installation in tight areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • 100% MONEY-BACK GUARANTEE - If you are unhappy with the product for whatever reason we will refund you, no questions asked!.
Check Stock

Heavy Duty Lid Support Hinges Soft Close Folding Lid Stay Hinge, Keep Lid Hinge Open, Perfect for Cabinet, Kitchen, Wardrobe Toy Chamber Max Support 50lb/2pcs

  • LID SUPPORT HINGE USAGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required..
  • KEEP THE LID OPEN— The lid hinge will hold the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • WEIGHT CAPACITY 50LB—Lid stay max weight support 50lbs/2pcs, Lid support hinge can be mounted on the left or right side. , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

Heavy Duty Lid Hing Soft Close, Zishengho Toy Box Hinge for Toy Chest Lid Support Hinge Keep Lid Stay Open Safety for Cabinet Kitchen Wardrobe Toy Chamber Max Support 50lb/2pcs

  • HEAVY DUTY LID HINGE WIDE APPLICATION—The lid hinge support the lids of box, such as toy box, cabinet, wardrobe lids. Good for any lids or flaps when a soft closing motion is required..
  • HOLD LID STAY OPEN--- The toy box hinge will keep the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • MAX SUPPORT 50LB—Lid stay hinge max weight support 50lbs/2pcs, Lid can be installed in the left or right side. Upward door open adjustable angle of 75°,90°,110° by yourself..
  • STABLE MATERIAL-- The metal version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • EASY INSTALL OF CHEST TOY HINGE– Only following the placement measurements of the instructions, you will install lid stay easily..
Check Stock

RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

  • DURABLE LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support or bar counter function..
  • SOFT CLOSE LID STAY---Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.
  • MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side..
  • WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe..
  • EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package..
Check Stock

Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)

  • STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch..
  • EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation..
  • LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right..
Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 2)

  • LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
  • COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..
Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 1)

  • LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
  • COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..
Check Stock

Heavy Duty Hinge with Soft Close 50lb/2pcs Folding Lid Stay Hinge for Cabinet, Kitchen Wardrobe Toy Chamber

  • WIDE USAGE LID SUPPORT HINGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • KEEP THE LID OPEN — The lid hinge will hold the lid open until you want to close. Never worry about having to support the lid anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • WEIGHT CAPACITY—Max weight support 50lbs/2 pcs, Lid support hinge can be mounted on the left or right side..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. You will get 2pcs lid stays, Allen wrench and exclusive redesign Installation instruction in package..
Check Stock