Reviews Centrifugal Coupled Pumps Manufacturers

Pump, Grinder, 2 HP, 15a

  • Price For: Each Pump Body Material: Cast Iron Cord Length: 25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
  • GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
  • GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
  • Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM....
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock

Bower/BCA 202FF Brng

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

1in Caliber High Pressure Pipeline Pump Single Suction Water Pump 12V Inline Directly Connected Centrifugal Pump

  • 【Direct-coupled】The high-pressure water pump does not work independently of the system, it is directly connected to the pipeline, saving installation space and easy to use.
  • 【Well sealed】Our single-impeller water pump is made of plastic material with good plasticity, with good sealing performance and considerable water absorption..
  • 【Single suction pump】The centrifugal pump is a 5way pump with only one suction port, stable performance, suitable for small flow systems.
  • 【Widely Applications】Our small flow five vane pump Suitable for household, industry, cosmetic, electrical appliances.
  • 【Specification】Model: LG50--Discharge: 28(m3/h)--Hydraulic Head: 6m--Power: 50W--Weight: Approx. 525g / 18.5oz.
Check Stock

Bosch 0392020073 Electric Water Pump - Compatible with Select Audi A3 Quattro A6 Quattro Q7 R8 TT Quattro Porsche Cayenne Volkswagen Eos Eurovan GTI Jetta Passat R32 Touareg

  • Harness Connector For Bosch Inter-Cooler Pumps.
  • Bosch Centrifugal Water Pump Adapter Pig-Tail.
Check Stock

Jabsco Deluxe Flush Marine Toilet, 17" Vertical, Solenoid, 12V, Soft Close 58040-3012, Deluxe Flush Marine Toilet, 17" Vertical, Solenoid, 12V, Soft Close

  • Specially designed pumps and components mean virtually silent Operation.
  • A powerful, anti-blocking centrifugal flush pump.
  • Four button touch panel, allows for minimum water usage of 1.5 US Quarts (1.5 L).
Check Stock

Coast To Coast 619005 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Coast To Coast 619004 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines.
  • To ensure the highest level of quality every clutch design that Centerforce offers is run through a gauntlet of testing procedures We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements.
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs This coupled with precise measurement and strict manufacturing control means you get parts right - the first time.
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet but also exceed industry standards.
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD mutli-disc coupling system.
Check Stock

OTDSPARES Centrifugal Clutch 5/8 Bore 11 Tooth 11T#35 Chain for 2.8HP 97cc Engines Mini Bike 11 Tooth Sprocket

  • 97cc 2.8 Hp Mini Baja Motorsports Mini Bike 11 Tooth & 5/8" Bore Clutch Assembly.
  • Centrifugal Clutch 5/8" Bore 11 Tooth 11T for 35 Chain for 2.8HP, 97cc Engines.
  • Fits ScooterX Sport Kart, Mini Bike, Mini Chopper, Lawnmower, Garden Equipment, Log Splitters, Pumps, Riding Mowers, Snow Throwers and Garden....
Check Stock

Centerforce 50058 Centerforce ® Accessories, Clutch Alignment Tool \90-97 Honda Accord 2.2L 5-Spd\

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock