Reviews Cemented Carbide Mining Bits

uxcell Cemented Carbide Twist Drill Bits 8.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs

  • Cemented Carbide Tip: 8.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others.
  • Features: Milled U-flutes with deep-cut spiral delivers fast material removal. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel.
  • Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
  • Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
  • Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item)..
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (3/32')

  • ...l flutes are constructed with a higher flute angle to remove chips more easily..
  • ★【Specs】 Tungsten Carbide Grade (ISO): K20 / Binder: %8 Cobalt / Hardness: 91.3 HRa / Uncoated / Flute Length: 1 inch, Overall Length: 2 inch, Drill Size: 3/32 inch.
  • ★【IMPORTANT, PLEASE READ BEFORE BUYING】 tungsten carbide or cemented carbide is a composite material, although it looks like a metal, it is a composite of Tungsten carbide powder mixed with cobalt as a binder metal and the resulting material is more like a ceramic than a metal. It is a very hard material being a 9 on the Mohs scale where diamond is a 10, quartz a 7 and hard steel around 4.5. Due to its hardness, it will chew down into most anything But that hardness makes them brittle on side lo.
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size 1/8

  • ★【Pack of 2 / Premium Bright Finish】 Multi-purpose solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely....
  • ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper....
  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length,....
  • ★【Specs】 Tungsten Carbide Grade (ISO): K20 / Binder: %8 Cobalt / Hardness: 91.3 HRa / Uncoated / Flute Length: 1-1/4 inch, Overall Length: 2-1/4....
  • ★【IMPORTANT, PLEASE READ BEFORE BUYING】Tungsten Carbide or cemented carbide is a composite material, although it looks like a metal, it is a....
Check Stock

1/4 Inch Shank Pattern Flush Trim Router Bit Set, Shank Carbide Pattern Router Bits Set, Template Straight Top Bearing Router Bits with 2 Regular Blades, Prevent Tear-Out, Suitable for Light Work

  • Carbide Blade Length: 1/4 inch router bits tool shank flush trimming milling cutter bit set, blade diameter 1/2 inch. Blade length 11.9mm, 20mm, 25mm, 38mm..
  • High Quality: C3 microcrystalline tungsten carbide blade, high-quality alloy steel body. Heat-resistant PTFE coating..
  • Various Uses: for trimming, slotting, etc. Such as DIY projects, lettering, and other template work suitable for solid wood, particleboard, MDF, plywood, etc. Router bits create a very smooth cut..
  • Cutting Smoother: 1/4 shank pattern milling cutter bit has 2 cemented carbide blades, high-quality tungsten steel alloy, and high-tech special grinding technology. The Router bits blade has good strength and high hardness, so the template can run on the bearing. This allows you to cut pellets smoothly and prevent tearing..
  • Perfect After-Sales Service: We will provide you with perfect after-sales service. After you purchase the goods, if you encounter any problems, please contact us in time..
Check Stock

3 Pieces Nail Carbide 5 in 1 Bit, Nail Drill Bits Set-2 Way Rotate Use for both Left to Right Handed, 3/32 Inch Shank Size Drill Machine for Fast Remove Acrylic or Hard Gel (Purple)

  • 2-Way rotation: our nail carbide 5 in 1 bit can be rotated to the right or left to achieve smooth cutting in clockwise and counterclockwise directions, very suitable for left and right hands without changing other sizes during work.
  • Quality to apply: the nail drill bit is made of cemented carbide and tungsten steel, reliable strength, durability and cutting performance, low heat, less dust, can quickly and well reshape, polish, smooth, grind, and polish, carving and smoothing gel nails or acrylic nails.
  • Universal 3/32 inch shank: you will get 3 different sizes of nail drill bits, including fine, medium, coarse, which fit most nail drill machines that use 3/32 inch bits, suitable for most gel nails and experienced manicurists or Nail Design beginners.
  • Easy to clean: the carbide nail drill bits are corrosion resistant, as well as no clogging for nails, you can easily clean the dust on the bits or nails with nail brush, protect the bits after each use, keep you and your client’s nails healthy.
Check Stock

Yakamoz 2Pcs Chrome Steel Top Mounted Bearings for Router Bits Repairing Ball Bearing Guide Replacement Tool Kit | Inner Dia. 3/16” & Overall Dia. 1-1/8”

  • Bearing Type: Top Mounted, Inner Diameter: 3/16”, Overall Diameter: 1-1/8”.
  • Contains bearings, set screws and allen wrench to fix any manufacturer's bits at a very affordable price..
  • Replace worn out bearings, convert regular bits into pattern cutters..
  • Vary the cutting depth of rabbets and change the profile on edge forming bits..
  • Cemented carbide constructed provide good performance at high speeds and long life use..
Check Stock

Hard Tungsten Steel Ball, Alloy Steel Ball, Extrusion Ball, YG6 Tungsten Steel Ball, YG8 Alloy Ball, 13.01mm-13.1mm Diameter, 1PCS,13.06mm*1PCS

  • Tungsten steel ball properties: commonly known as cemented carbide balls, carbonized hook balls, refers to balls, balls made of cemented carbide as the material, cemented carbide balls have high hardness, wear resistance, corrosion resistance, bending resistance, use Harsh environment, can replace other material steel ball products.
  • Cemented carbide is mainly composed of carbide (WC. TiC) micron powder of high hardness refractory metal, with cobalt (C"o) or silver (Ni), aluminum (Mo) as binder, in a vacuum furnace. Or powder metallurgy products sintered in hydrogen reduction furnace, commonly used cemented carbide balls.
  • Process flow milling → formulating according to the requirements of the application → wetting → mixing → pulverization → drying → adding molding agent after the festival → drying → the mixture obtained after the festival → granulation → cold isostatic pressing → molding → Sintering → forming (blank) → packaging → storage.
  • Hook steel ball has a wide range of applications, such as: precision bearings, instruments, meters, pens, spraying machines, water mulberries, mechanical accessories, sealing cabinets, pump making, punching holes, oil fields, hydrochloric acid laboratories, hardness measuring instruments, ....
Check Stock

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

  • ...onry drill bit set with case. Easy to store and take. 16mm 14mm 12mm 10mm 8mm 6mm 5mm 4mm 3mm (5/8" 9/16" 1/2" 3/8" 5/16" 1/4" 3/16" 5/32" 1/8"). There are multiple 9 sizes that will help in drilling by starting with the smallest bit and continuing to the size needed. To meet your more needs..
  • ☺[Ceramic Drill with Cemented Carbide Tip, Hardness is Higher Than Ordinary Drill, More Wear Resistance] Excellent tile drill bits with nice point, make the drilling much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
  • ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
  • ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry drill bit), Higher Efficiency] Custom triangle spear tip solves drill bit wander and sl....
Check Stock

Aopin Forstner Drill Bits Professional Carbide Woodworking Hole Saw, Cutting Diameter 22mm, 2Pcs (Blue, Silver)

  • Applications: Can be used for drilling holes on wood and wood products perforation, plastic products, furniture, door hinge..
  • Features: Special heat treatment, cemented carbide. Arc design optimizes chip removal. two blade cutter head, Low cutting resistance. the design of the Forstner drill center point can precise positioning without slipping, sturdy round handle..
  • Instructions: Suitable for hand-held electric drills, portable percussion drills, CNC equipment, engraving machines, bench drills, vertical drilling machines, and other woodworking milling and drilling equipment..
  • Package Content: 2 x Carbide Forstner Bits..
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • ..., 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a d....
Check Stock