Reviews Tungsten Carbide Mining Tips

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

Makita B-61656 7-1/4\ 24T Carbide-Tipped Max Efficiency Circular Saw Blade, Framing

  • Up to 70% more cuts per charge compared to standard blades.
  • Up to 70% faster cutting compared to standard blades.
  • Ultra-Thin 0.057" kerf reduces the load put on the tool.
  • High grade Tungsten carbide tips for durability.
  • Special ATAFR (Alternate Top Alternate Face w/ Raker) carbide tips provide smoother and faster cuts.
Check Stock

Men's Tungsten Black Bar Pendant Necklace with 22 Inches Stainless Steel Snake Chain

  • 2 pcs tungsten steel bar pendant necklaces for couples and lovers, 1 silver bar necklace and 1 black one, friendship necklace for boys and girls, gorgeous pendant chain for people who like clean and simple design, Easter gifts for kids.
  • Material: tungsten carbide, tungsten steel is known for its super hardness & flawless quality, the hardness is about 4 times over titanium steel, great material for long lasting jewelry without any fading or scratches. The density is about 1.5 times over titanium steel, it makes the pendant having a good weight to it. Hypoallergenic and outstanding tarnish resistance. Tips: the super hardness of tungsten carbide pendant lead to impact toughness declining, so please avoid falling down and impact..
  • Pendant measurements: Height 1.7"(42mm), Width 0.2"(5.6mm), Thickness 0.2"(5.6mm), Weight 0.56oz(17g). Comes with 1.5mm x 22" snake chains.
  • Minimalist design, simple and clean, less but better, goes with almost any outfits by a chic dose of low-key gorgeous.
  • Package with MOO&LEE branded velvet gift pouch(2pcs). To share the couples necklace with your significant other for Birthday, Anniversary, Christmas, Valentine's Day, etc..
Check Stock

Makita B-61656-3 7-1/4\ 24T Carbide-Tipped Max Efficiency Circular Saw Blade, Framing, 3/pk

  • Up to 70% more cuts per charge compared to standard blades.
  • Up to 70% faster cutting compared to standard blades.
  • Ultra-Thin 0.057" kerf reduces the load put on the tool.
  • High grade Tungsten carbide tips for durability.
  • Special ATAFR (Alternate Top Alternate Face w/ Raker) carbide tips provide smoother and faster cuts.
Check Stock

Lansky PS-MED01 BladeMedic

  • Tungsten Carbide Tungsten Carbide- Just three or four strokes will restore your blade..
  • Ceramic Sharpening Rods- Tungsten Carbide Polish to a finished edge in three or four strokes..
  • Serrated Knife Sharpener- Designed to get inside even the smallest serrations..
  • Diamond Tapered Rod- For fast reconditioning and maintenance..
  • Sharpening angles are pre-set at 22. 5º to achieve a 45º inclusive angle.
  • Tungsten Carbide-Three Or Four Strokes Will Restore Your Blade.
  • Ceramic Sharpening Rods-Polist To A Finished Edge In Three Or Four Strokes.
  • Serrated Knife Sharpener-Designed To Get Inside Even The Smallest Serrations.
Check Stock

THREE KEYS JEWELRY 8mm White Tungsten Carbide Ring Wedding Engagement Band Silver Multi Faceted Fashion Band Silver Size 10

  • Material: Genuine Tungsten Carbide - Scratch Proof.
Check Stock

K Kwokker Tungsten Carbide Burr Set 1/8 Shank Diamond Files HRA85 Rotary Tool Accessory Kit, Drill Chucks Accessories for Dremel Rotary Drill Air Die Grinder for Metal Polishing, Wood Carving

  • ...arbide Die Grinder Bits. Shank dia: 3mm(1/8"), Cutting dia: 6mm(1/4"), fits dremel tool accessories and most small rotary tools. 10 different types of carving kit drill bits, meet your different needs..
  • √ [Hardness HRA85, Very Well Made And Tough As Nails, Nice Tungsten Carbide] Carbide burr set made of heat-treated durable carbide that lasts long working life, packed with nice plastic case for safety storage and protection..
  • √ [Safe And Efficient, Like a Hot Knife Thru Butter] VERY IMPORTANT: SINGLE-SLOT Tungsten carbide burrs drill bits, BEST FOR: Metal, cast iron, cast steel, carbon steel, alloy steel, stainless steel and so on.
  • GOOD FOR: wood, marble, jade, ceramic, glass etc. NOT FOR: EPOXY. PLEASE USE ROTARY BURR SET ON THE CORRECT MATERIAL TO AVOID DAMAGE TO THE PRODUCT DUE TO INCORRECT USE..
  • √ [This Is a Essential Rotary Burr Set] Grinding head for air die grinder. NOTE: When using the wood carving bits, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are recommended to prevent stab wounds..
Check Stock

Afantti Scribe Tool, Tungsten Carbide Tip Scriber Scribing Engraving Etching Pen DIY Engraver Etcher Tool Kit for Metal Glass Ceramics Stone Tile Wood Jewelry with Stencils, 4 Pack

  • 【Double Tungsten Carbide Tips】 Each Scriber with double tungsten carbide tips, which is twice as hard as steel, high quality & long service life.
  • 【Sturdy Construction & Comfortable Handgrip】 Lightweight & sturdy construction, designed in a pen shape and a pen size, very comfortable to hold and scratch.
  • 【Simple & Easy to Use】No power required, it’s just like using a pen when using it to scratch / mark surfaces. Easy to control and makes smooth & clear strokes.
  • 【8 Stencils & Convenient Gift Box】4 graphic stencils & 4 alphabet/number stencils,a great help for engraving / marking / etching letters or numbers. Comes with a covenient drawer style gift box, a great gift for your family or friends..
  • 【Widely Use】 Perfect tool for marking lines on hard materials like metal sheet,ceramics, glass, stone, rock, wood, tile, tag, ring, jewelry, or sketch out designs..
Check Stock

Rocaris 10 Pcs Hole Saw Kit for Hard Metal 16-53mm, Tungsten Carbide Tipped Carbide Hole Saw Set with Titanium-Plated Pilot Drills for Stainless Steel, Metal, Iron, Wood, Plastic

  • 【Top Quality】 Made of high quality Tungsten Carbide Tipped Carbide, High-grade Titanium-plated cemented carbide Tooth are sharp, anti-rust and sturdy..
  • 【Innovative Three-blade Design】 Designed as Three-blade, The Carbide Hole Saw Kit‘s teeth is sharper and more efficient, ideal for cutting hard metals..
  • 【Chip Hole design】 Design chip hole to Prevent clogging, the Hole Saw Kit for Metal improve hole-opening efficiency without blocking..
  • 【Multipurpose Tools】The Metal Hole Saw Kit can be applied to electric drills, bench drills and hand drills.Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
  • 【Great variety】Include 10Pcs Tungsten Carbide Tipped Hole Saw Set with 1Pcs hex wrenches(Size:16, 18, 20, 22, 25, 30, 35, 45, 50, 53mm). To prevent rust, each drill bit must be oiled. All drills are packed in an exquisite aluminum box, which would be a excellent present for you, your family and friernd..
  • 【Tips】For your safty, please make sure you wear SAFETY equipment such as a face shield (or Full Coverage Goggles) and gloves..
Check Stock

MCJ TCT Tools Hole Saw Set of 6 Electrician Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, and Plastic Sizes 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2

  • Industrial grade high-quality T.C.T. Carbide ( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust-proof, sturdy, and durability.
  • Tungsten carbide tipped hole cutters are ideal for drilling steel plate, stainless steel, iron, aluminum, copper, cast iron, fiberglass, and plastic.
  • Manufactured with premium high-grade solid carbide tips for added strength and durability. Tipped teeth for extra lifespan with tip: up to 1/4" cutting depth for stainless steel with a hand drill, 1" depth with a drill press.
  • Designed for use in a chuck - can be used with drill press or a hand drill.
  • Includes Sizes: 7/8",1-1/8",1-3/8",1-3/4",2",2-1/2" Set comes with customized casse for portability and designated slots to keep everything in place.
Check Stock