Reviews Cemented Carbide Brazed Tips

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

KOWOOD PRO Flush Trim Router Bit(16 Flutes) 1/2\Shank,2\Cut Length

  • KOWOOD Pro flush trim router bit is designed specifically for professional trimming work.
  • This flush trim router bit features 16 individually brazed carbide tips in a compression design in order to eliminate chipping.
  • Multi blade technology can effectively improve work efficiency and tool life.
  • Quality construction, YG8 tungsten carbide blade provides a clean and accurated cut with durable powder coating finish.
  • ▲What You Get▲KOWOOD Pro Flush Trim Router Bit (16 Flutes) 1/2" Shank, 2" Cut Length * 1.
  • 12-Month Service Card. Our after-sales customer service is available at any time. Please feel free to contact us for help.
Check Stock

CRAFTSMAN 10-Inch Miter Saw Blade, Combo Pack (CMAS210CMB)

  • DURABILITY: Induction-brazed carbide tips of 10-inch miter saw blade are made for durability and long life.
  • NO MORE WARPING: Heat-treated plate eliminates warping.
  • ACCURATE CUTS: Precision ground teeth for smooth, accurate cuts.
  • CORROSION RESISTANT: Corrosion resistant coating designed to prevent rust.
Check Stock

POWERTEC 15521 Aluminum Oxide Grinding Wheel 80 Grit 8 x 1 with 5/8 Arbor

  • INCLUDES: 8” Aluminum Oxide Grinding Wheel w/ 36 grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 8 inches in diameter, 1” in thickness, comes with a 5/8” arbor hole size, and possesses a 3600 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 8-inch bench grinder machines.
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and differen....
Check Stock

POWERTEC 15520 Aluminum Oxide Grinding Wheel 150 Grit, 6" x 3/4" with 1/2" Arbor

  • INCLUDES: 6” Aluminum Oxide Grinding Wheel w/ 150 grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 6 inches in diameter, 3/4” in thickness, comes with a ½” arbor hole size, and possesses a 4140 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 6-inch bench grinder machines.
Check Stock

Norton 66253161393 10'' X 1-1/2'' X 1-1/4'' GP COARSE Type 01 Straight Gemini Bench & Pedestal Grinding Wheel

  • INCLUDES: 6” Aluminum Oxide Grinding Wheel w/ 100grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 6 inches in diameter, 3/4” in thickness, comes with a ½” arbor hole size, and possesses a 3450 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 6-inch bench grinder machines.
Check Stock

High Hardness 2-Flute Milling Cutter, Cemented Carbide Milling Cutter, for Milling PVC Processing Wood Plywood

  • Light weight and compact size, convenient to use and easy to carry around..
  • 10pcs cemented carbide milling cutter with high hardness, durable in use..
  • Adopting high quality cemented carbide material, ensuring long service life..
  • Suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc..
  • Clean surface without burrs, incisive cutting edge, milling, hole and edge..
Check Stock

15Pcs 45 Degree Plotter Cutter Blades Red Cover Cemented Carbide Roland GCC Vinyl Cutter Cutting Plotter Blade

  • Premium Quality Material: These Plotter Blades are made of high quality cemented carbide material to provide a good durability and wear resistance. It features with a high hardness and greater strength to offer an extra long life, it is anti-rust, anti-static, no peeling. No worry about bending during your working period.
  • 45 Degree Design: These Plotter Knife adopts with a 45 standard vinyl cutter blade design, and they can be used for cutting different types of thin materials.They are recommended for all standard cast and vinyls as well as other thin materials.
  • Safe to Use: There comes with red safe cover in the package, which can protect these Vinyl Cutter Blade for easy store and transportation. At the same time, there also comes with safe plastic box for easy store and carry, you can easily find what you needs.
  • Excellent Performance: These Roland Vinyl Blades have sharp grinding tips for easy and quick cutting. At the same time the ....
Check Stock