Reviews Catv Transmitter
E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable
- ...TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
- High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
- Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
- Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
- Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with ....
Check StockLeviton 47693-8P 1x8 Premium Amplified CATV Module, Gold
- High quality, professional-grade, robust machine-threaded, gold-plated brass ports meet SCTE requirements.
- Distribute CATV, HDTV, antenna, VCR/DVD, Camera/CCTV signals on coaxial cable throughout a home or office.
- Provide a bi-directional signal path to support cable modem or cable box communications.F-ports provide up to 15 psi weather sealing.
- Durable aluminum die-cast housing with white powder coating.
Check StockZeeVee ZvPro820 HD Video Distribution QAM Modulator Over Coax 1080p
- 【For CATV】: Fine workmanship, with cost effectiveness for your own local CATV system..
- 【Input&Output】: VHF working frequency for PLL controlled, HD input, A/V output, RF output..
- 【Plug And Play】: Support NTSC and PAL TV format output, no need to install driver program, portable, flexible, plug and play..
- 【ABS Shell】: Made of high quality ABS material, sturdy, durable and long service life..
- 【Long Service Life】: Professional manufacturing, stable characteristics and high reliability..
Check StockCommscope 4672004/10 UH68120 Hybrid Combination Cable - RG-6 and CAT6 for CATV & Data, Category-6, 1000-Feet, Blue
- (1) Series-6 Quad-Shield RG-6 Coaxial CATV Cable.
- With (1) Cat 6 Twisted Pair Non-Plenum Cable.
- Composite Cable - Blue Jacket, CMR PVC Jacket..
- Ideal for CCTV, Siamese, POE, CATV SATV / Data Combination Distribution..
Check StockSZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter
- Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
- {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
- Route the cable out of sight with a wall mounted HDTV.
- Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
- {SIMPLE INSTALLATION} of this lightweight IR cable.
- Locate the IR Blaster near the source sensor to repeat the signal to the source.
- Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
- IR Tx and Rx cables have adhesive circles on the back for mounting.
- {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
- 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
- {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
- Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the re....
Check StockInfrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)
- Red LED in IR Receiver bulb verifies the signal transmission,Operating range:20-60HZ.
- {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
- Route the cable out of sight with a wall mounted HDTV.
- Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
- {SIMPLE INSTALLATION} of this lightweight IR cable.
- Locate the IR Blaster near the source sensor to repeat the signal to the source.
- Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
- IR Tx and Rx cables have adhesive circles on the back for mounting.
- {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
- 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
- {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
- Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the re....
Check StockUL Listed RG6 18AWG Coaxial Cable Quad Shielded White Spool 1000 Foot
- PREMIUM RG6/U 75 OHM COAX. Designed to support cable television (CATV), Digital HDTV, Digital Satellite, cable box, digital router, modem cable,....
- HASSLE FREE PACKAGING. 500 feet (152 meters) of RG 6 dual shield has been packaged on a tangle free, easy pull reel/spool so you don’t have to worry....
- 18 AWG BARE COPPER CONDUCTOR. The ideal conductor material for data transmission, low voltage, and satellite installations requiring voltage to the....
- FOR USE INDOORS. The riser rated jacket is for use in between floors, in wall, and non-plenum spaces. Help fires from spreading floor to floor in....
- ✓ CERTIFIED by trueCABLE. Our coax cables have been sweep tested up to 3GHz. ANSI/TIA Certified to 568.4-D CATV RG6 @ 150 feet with a Fluke DSX-8000....
Check Stock2ft Black Indoor/Outdoor RG-6 Coax Cable 75 Ohm UV Resistance (CATV, Satellite TV, or Broadband Internet) with Quad Shield Compression COAXIAL CONNECTORS
- UL / ETL Listings CATV, CM, NEC 830 BM - RG-6 75 Ohm Coax Cable for (CATV, Satellite TV, & Broadband/High Speed Internet).
- Cable Construction: Enhanced layer of foil, provides a 20 db improvement in shielding after 10,000 flexes as compared to other manufacturers’ cable. - Foil Shields: Aluminum (100% Coverage) with 18% Overlap - Dielectric: Gas Injected Foam PE - Center Conductor: 18 Awg.
- Assembled in the USA by professionals at PHAT SATELLITE INTL 8 facilities across the USA.
- PLEASE SEE OTHER CABLES AVAILABLE FROM PHAT SATELLITE INTL.
Check StockFiber Optic Jacket Stripper Coaxial Cable Stripping Cutter Tool Cable Cutter Crimper 45-163 + 45-162
- ADJUSTABLE BLADES - This fiber optic buffer tube stripper has adjustable blades that you can set for any depth to ensure nick-free jacket entry into fiber optic buffer tubes.
- EASY TO USE - This fiber optic stripping tool provides a comfortable and secure grip that helps make the fiber optic stripping process easy and efficient.
- FIBER OPTIC STRIPPER - CATV UTP/STP Fiber optic stripper used for stripping simplex fiber and a variety of fiber optic cable. 45-162: for (0-1/8") / (0-3.2mm) Coaxial Cable, 45-163: for (1/8-7/32") / (3.2mm - 5.6mm) Coaxial Cable..
- WIDELY APPLICABLE - Fiber optic tools can also be used to screen twisted pair cable, Twisted stranded cable, CATV cable, CB cable, SO, SJ, SJT and other types of flexible power cord.
- UNIQUE DESIGN - 45-162 / 163 coaxial stripper is easy to carry and use. It is very suitable for family or daily use..
Check StockCATV Tester Cable TV Handle Digital Signal Level Meter USA STD-CATV (5M-870M Hz)
- High-Performance Surveying Instrument: RY-S110 Signal level meter TV Field Intensity applies to the need of the television and cable television engineering installation and detection, it is the high-performance surveying instrument specially designed for the cable television technical personnel..
- Working Channel: U.S. Standard Channel USA STD-CATV/U.S. digital standard channels USA STD-CATV. Working range: S110 47MHz ~ 870MHz, Measuring range: 30dBuV ~ 120 dBuV.
- How to switch the meters Channel to US Channel: Enter VOLT and then press ./Z button, and the right corner please switch to 2ch, then you entered US channel..
- Liquid Crystal Display: High brightness backlight working mode, digital clear display.
- Compatible Size, easy for carrying: Battery: 7.4V / 800mAH lithium battery, Working time:> 6 hours (audio / LCD backlight off), handheld size for easy carrying..
Check Stock