Reviews Casting Trunnion Ball Valve

Inertia Gear Wood Splitter - Cast Iron Manual Log Splitter - No Sharp Edges - No More Axes! Safest Way to Cut Firewood

  • 4.5" bore (5" OD) x 24" Stroke 27-30 ton Trunnion Mt Cylinder.
  • Control Valve with Detent in one direction, 25 gpm max flow.
  • Hose and fitting to connect valve and cylinder.
  • OEM Replacement for 918-0769A 718-0769 cylinders and more.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

TCP Global 5 Gallon 20 Liters Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid Caster Wheels Regulator Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 5 gallons (20 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds....
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 12.3" inside diameter and is 13"....
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge....
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless....
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

JET JWBS-15 15-Inch Woodworking Bandsaw 1-3/4HP 1Ph 115/230V 714600

  • Toolless Adjustments: Independently adjustable, upper and lower ball bearing guides.
  • Optimum Blade Support: Rigid, four-sided guide post with rack and pinion adjustment.
  • Three Heavy-Duty Tensioning Settings: Full tension, partial tension, and full release.
  • Maximum Support and Stability: Cast iron trunnion and precision-ground cast iron table.
  • Smooth and Easy Adjusments: Cast iron handwheels and ergonomically-designed knobs.
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock