Reviews Carbon Tube

uxcell Carbon Fiber Round Tube 10x8x330mm 3K Roll Wrapped Matt Surface for RC Airplane Quadcopter 2Pcs

  • Size and Shape: rounded tube with 10mm outside diameter, 8mm inner diameter, 330mm overall length..
  • Lightweight: strong as metal but only one-fifth in weight, corrosion-resistant, and heat-resisting..
  • Smooth Surface: made of high tensile carbon fiber, matte surface..
  • Application: carbon fiber wing tube is used for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
  • Note: due to manual measurement, most carbon fiber tube sizes will have a little error..
Check Stock

(2) Carbon Fiber Tubes - 20mm x 18mm x 500mm - 3K Roll Wrapped 100% Carbon Fiber Tube Glossy Surface (2) Tubes

  • Size and Shape: rounded tube with 6mm outside diameter, 4mm inner diameter, 350mm overall length..
  • Lightweight: strong as metal but only one-fifth in weight, corrosion-resistant, and heat-resisting..
  • Smooth Surface: made of high tensile carbon fiber, glossy surface with a polishing finish..
  • Application: carbon fiber wing tube is used for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
  • Note: due to manual measurement, most carbon fiber tube sizes will have a little error..
Check Stock

Aquarium CO2 Diffuse Atomizer, Dioxide Dissolve System for Fish Tank Easy Carbon Dioxide Diffuser CO2 Atomizer for Super Fish Tank Aquarium Equipment(Brown L)

  • APPLOICATION: For aquarium fish tank plant carbon dioxide dissolve system. Super micro hole atomization, U type air inlet bubble, invisible check valve..
  • ADVANTAGE: CO2 atomizer sturdy suction cup ensure it stays attaches to the side of the tank, and adopting nut locking system,and it is effective to lock carbon dioxide tube, high effect on dissolving CO2..
  • EFFECTIVE DIFFUSER: The refined carbon dioxide bubbles are small and fluid, good for fish to run photosynthesis and mprove the growth and health of your plants..
  • SPECIAL DESIGN: Designed for screw lock on the CO2 tube, no need to worry the tube loose off by the pressure and caused damage..
  • QUALITY WORKMANSHIP: Carbon dioxide diffuser made of high quality ABS material, soft and warm, safe and durable..
Check Stock

Carbon Fiber Tube 5mm OD x 3mm ID x 200mm Matt Tubes Rod (4 PCS)

  • carbon fiber tube, is used of high-tech carbon fiber composite material made of prepreg.
  • Carbon fiber tube with high strength, stiffness, load bearing performance.
  • And a light weight (material density 1.9).
  • Good corrosion resistance, good material stability.
Check Stock

uxcell Carbon Fiber Round Tube 3mm x 2mm x 400mm Carbon Fiber Wing Pultrusion Tubing for RC Airplane Quadcopter 10Pcs

  • Size and Shape: pultrusion rounded tube with 3mm outside diameter, 2mm inner diameter, 400mm overall length..
  • Pultrusion: pultruded tube means that all the fibers are in one direction, which makes it stronger than the woven tube in tension..
  • Lightweight: strong as metal but only one fifth in weight, corrosion-resistant and heat-resisting..
  • Smooth Surface: made of high tensile and modulus unidirectional carbon fiber..
  • Application: pultruded carbon fiber tube is used for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
Check Stock

MTB Bicycle Suspension Fork 24 26 27.5 29 Inch 3K Carbon Bike Fork Straight Tube 1-1/8\ Disc Brake 700g

  • Name: Mountain bike 3K carbon fiber front fork，Disc brake, fork open file 100mm/3.9 inch, Weight: 710 - 810g ± 10g..
  • Material: T800 high modulus carbon fiber material and Aluminum alloy straight tube..
  • Specification: Ultra-lightweight Full Carbon. Weave: 3K. Finishing: Gloss. Standard: EN Standard..
  • The standpipe : 230mm length straight tube design, pipe diameter 1-1/8" (28. 6mm) disc brake, 9mm quick release..
  • For ：24"/26"/27.5"/29 inch Mountain Bike wheel ..
Check Stock

Hobbypower S550 F550 Upgrade Hexacopter Fuselage Frame Kit PCB with Carbon Fiber Landing Gear

  • Wheelbase Diameter: 695MM. Please ignore the description of the boxes and manual..
  • The TAROT 680PRO six-axis aircraft frame is the replacement for the 680 series rack. It has an easy-to-fold design with a lower center of gravity and a more stable design. The exterior design has a strong viewing angle impact..
  • The main body is equipped with a high-strength matt gold process composite PCB circuit. The integrated PCB board connection makes the connection of power supply and ESC faster and safer, and provides sufficient installation space for various flight control systems. It adopts Toray 3K hollow pure carbon fiber carbon fiber tube (non-3K glass tube) for full CNC machining. The design standard is higher than similar products. The new 16MM carbon tube folding seat widens the 3-point support to prevent.
  • The TAROT 680PRO designed for users with high portability requirements, it is especially suitable for monitoring, remote sensing, surveying, aerial surveying, fire observation, life exploration, cable inspection, farm monitoring, etc, which are high requirements on moving performance, light loading, and long flying time..
Check Stock

cncarbonfiber 2pcs 8mm Carbon Fiber Tube 8mmx6mmx350mm,6/10/12/16/15mm Available,3K Roll Wrapped Plain Glossy Finish,2pcs 08x06x420mm

  • Size and Shape: pultrusion rounded tube with 4mm outside diameter, 2mm inner diameter, 420mm overall length..
  • Pultrusion: pultruded tube means that all the fibers are in one direction, which makes it stronger than the woven tube in tension..
  • Lightweight: strong as metal but only one fifth in weight, corrosion-resistant and heat-resisting..
  • Smooth Surface: made of high tensile and modulus unidirectional carbon fiber..
  • Application: pultruded carbon fiber tube is used for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
Check Stock

Carbon Fiber Bowl Tripod, AS80C Heavy Duty Camera Tripod Ultra Stable & Lightweight Professional Camera Travel Tripod，Max Load 44lbs/20kg，65mm Bowl Adapter as a Gift（RT80C Upgraded）

  • 【Superior Quality】The bowl tripod leg tube is made of 10 layers of carbon fiber, lightweight and strong. Top platform structure is all metal, CNC machining, smooth and solid. The workmanship of the ball adapter is also top-notch..
  • 【Ultra Stable】The carbon tripod has a maximum diameter of 32.5mm and Min diameter of 22mm, which greatly enhances the stability of the tripod. The Max Load 44pounds/20kg.Top grade carbon fiber materials and CNC technology make it an excellent tripod..
  • 【Portable&Compact】The maximum height is 63.8in/162cm, the folding length is 22.8in/58cm, and the weight is only 4lbs/1.78kg. This carbon fiber bowl tripod is compact and practical, very suitable for outdoor travel shooting..
  • 【Professional Design】Three level angle adjustment to meet different needs. 4 sections leg tube with screw knob makes it compact, stable and easy to operate. And the no central axis design is more stable. Equipped with interchangeable screw-in rubber feet and stainless steel spiked feet for Various terrain..
  • 【New Upgrade】5-Years Warranty. The Artcise AS80C is an upgraded version of INNOREL RT80C. It upgraded in the top mount plate, carbon leg tube, buckle, height adjustment knob, foot nails, foot pad and other important parts. The aim is to ....
Check Stock

Carbon Fiber Tripod Monopod Heavy Duty Bowl Tripod with 75mm Bowl and Bowl Adapter ARTCISE HS80C Ultra Stable & Lightweight Professional Camera Tripod Stand Max Load 66 Pounds/30kg

  • 【Rock Solid】HS80C carbon fiber tripod features the latest enhanced stability structure design, with the addition of a counterweight hook. The maximum leg tube diameter 34.5mm and the minimum is 25mm.Highest quality materials, combined with advanced processing, make this tripod robust and stable with a maximum load of up to 66lbs/30kg, making it ideal for outdoor shooting with heavy duty camera lens equipment..
  • 【Excellent Quality】This top-of-the-line carbon fiber tripod features a high-quality 8-layer carbon fiber tube, metal parts made of aeronautical aluminum alloys, and are of superior quality and durable through CNC processing technology and hard anode oxidation technology. The grip of the tube leg is made of all leather material, purely hand-stitched, with non-slip, cold-proof effect, high-quality leather material is more durable and practical than the general sponge sheath..
  • 【Lightweight Design】HS80C bowl tripod is fully lightweight with a full weight of only 4.2lb/1.9kg . The platform, bowl and bowl adapter are all hollow out design，HS80C is more suitable for carrying and traveling than other heavy duty tripods. The bowl and bowl adapter are designed to make it easier to adjust the shooting angle and is ideal for DSLR cameras, telep....
Check Stock