Reviews Carbon Steel Butt welded Pipe

PSCCO 4PCS Butt Welding Clamps Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

A set of 4 Intergrips firmly fix the flat or curved panel edge-to-edge and surface-to-surface to achieve a good clean connection..
The welding clamp is made of galvanized steel, which can prevent rust and is easy to install or disassemble..
Butt welding tongs can fix workpieces for precise butt welding and side-to-side welding..
A large number of fixtures suitable for any welding kit. The gap between the board and the board is maintained at 0.40 inches for edge-to-edge welding..

All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Note : In order for this product to work correctly you must have the appropriate machine with the appropriate OCV and the correct technique.

Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.
Package Included: Welding accessories set includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..

LTI 3" Length exhaust clamp is Made in Full 304 Stainless Steel Over 100 hours salt spray test to ensure the great performance in anti-corrosion.
Universal fitment Butt Joins 2.75" OD Pipe to 2.75" OD Pipe, we also provide many different sizes to fulfill your needs. Full clamping area to create....
The butt joint clamps are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back....
No welding design makes lap joint clamp fast, easy and accurate installation. it is removable and reusable, easy to install without welding.
LTI provide 12 months warranty from the date of purchased. We value your shopping experience and strive to offer a high-quality product and service.....

【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....

Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch /76.2mm..
Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
Advantages: No welding design, easy to install or remove..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..

Size: Joins 2.5″ OD pipe to 2.5″ OD pipe, width of strap: 3inch /76.2mm..
Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
Advantages: No welding design, easy to install or remove..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..

Size: Joins 2.0" OD pipe to 2.0" OD pipe, width of strap: 3inch /76.2mm..
Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
Advantages: No welding design, easy to install or remove..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..

Size: Joins 2.75" OD pipe to 2.75" OD pipe, width of strap: 3inch /76.2mm..
Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
Advantages: No welding design, easy to install or remove..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..