Reviews Carbide Sleeve

Sleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Check Stock

Sleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
Check Stock

Glieskir 2 Pack Tungsten Carbide Scriber with Magnet,with Extra 10 Replacement Marking Tip,Etching Engraving Pen for Glass/Ceramics/Metal Sheet

  • ✔2 Pack Tungsten Carbide Tip Metal Scriber Tool With 10 Free Replacements Marking Tip, Each Pen Tip Comes With A Protective Sleeve..
  • ✔The Pen Body Is Nade Of High-Quality Aluminum, And The Pen Tip Is Made Of High-Quality Tungsten Carbide, Sharp, High Hardness, And Strong Wear Resistance.
  • ✔The Magnet At The End Of The Tungsten Carbide Scriber Can Help You Easily Remove Excess Iron Filings From The Complex Carving Patterns, Or Help You Absorb Some Small Parts.
  • ✔Convenient Pen Design And Convenient Pocket Clip, Knurled Aluminum Handle Provides Maximum Control And Comfort..
  • ✔We Stand Behind 0ur Products 100% And Are Committed To Fulfilling Our Customers’ Needs. If You Are Unsatisfied With Your Purchase, Get In Touch With Us And We Will Be More Than Happy To Assist You..
Check Stock

2 PCS Mechanical Carpenter Pencil with Marker Refills, 1 x Carbide Tip Scribe and 1 x Automatic Center Punch, Carpenter Pencils Tools for Construction, Wood, Glass, Ceramics, Metal and Cement

  • ...old, attach a convenient pocket clip make it easy to carry and store.
  • Durable and moisture-resistant graphite refills perfectly work in the carpenter pencils and suitable for carpenters, builders, businessman, or anyone who needs a tough pencil that will mark a variety of surfaces.
  • Metal Scribe Tool for Marking: the carbide tip pen with convenient pocket clip make it easy to carry and the carbide tip cover will protecting tungsten carbide point when not in use.
  • The tip of metal scribe pen made from durable tungsten carbide you can use it for smooth and clear strokes comfortably.
  • Metal center punch allow you to have better control: when drilling into metal it can create a center holes and keeps the drill bit from roaming about during the initial drill process.
  • Durable and powerful chrome plated tip can lasts for hundreds of strikes.
  • You will be able to adjust the strike force through screwing the red cap.
  • The spring loaded center punch tool is suitable for a variety of tasks ranging from construction to automotive and can be used as a glass window breaker for car safety.
  • Widely Use: the carpenter marking tools can be applied for construction, automotive, it can easily handle many hard materials, such as hardened steel, stainless steel, ceramic jade, shell....
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

Composite Carbide Sandblaster Nozzle Tip: 3/32' ID, Longer-Lasting than Tungsten & Boron Blasting Nozzles

  • SUPER COMPOSITE CARBIDE: Experience one of the longest lasting materials used in a sandblaster nozzle at a fraction of the price. The composite carbide lasts much longer than Ceramic, Tungsten Carbide & even Boron Carbide..
  • LONG-LASTING NOZZLES SAVE $: Composite carbide sandblaster nozzles are known to outlast all other types. These are estimated to last up to 1000x ceramic, 50x times tungsten carbide, 5x times boron carbide..
  • 3/32" ID BORE DIAMETER: Our medium size is most common, especially for blasting both fine & course abrasive grits inside a cabinet. Shape: standard tapered nozzle tip which is great for for most pressure pot sandblaster nozzle holders..
  • PREMIUM SANDBLASTER NOZZLE: Made of a hard, compacted, specially formulated carbides weighting about 30 grams! Holds up to aggressive abrasive like aluminum oxide and silicon carbide. Has an estimated service life of up to 1,000+ hours with aluminum oxide abrasive!.
  • WEAR RESISTANCE CARBIDE: Get better performance with low-wear nozzles and save money in the long run! 100% SATISFACTION GUARANTEE or your money back. Please contact us if you feel it didn't last..
Check Stock

Woodys Dooly Carbide Wear Rods - 6in. DY6-6580

  • Dooly wear bars create four parallel traction lines for dramatically decreased darting and enhanced handling.
  • Each wear rod features two 7/16in. runners with center carbide.
  • 6in. and 8in. carbide carry 60 degree carbide.
  • Hardweld at front of wear rod and 1.5in. carbide pad at the back.
  • Durable 3/8in. - 16 mounting studs ensure secure fit.
Check Stock

4Pcs Spanner Wrench Set,Coilover Wrench,Universal Hook C Shock Spanner Wrenches,Coil Over Adjustment Tool for Motorcycle Bike Suspension Absorber

  • [Premium Quality]-Our coilover wrench is made of high quality cemented carbide NO.45 steel material,sturdy,durable.Integral heat treatment,thickened....
  • [Non-Slip Rubber Sleeve]-Our spanner wrench set is designed with rubber sleeve in the handle part.The red rubber sleeve can prevent slip by increasing....
  • [Hook C Ergonomic Design]-The appearance of the hook spanner wrench set adopts crescent design,over sized front hook made it no easy to slip....
  • [Universal Shock Spanner Wrench]-You will get 4pcs coilover adjustment tool,1pc er32 wrench,1pc er40 spanner wrench coilover,1pc 38-42 c spanner....
  • [Wide Applications]-This coil over adjusting tool can be applied to adjust the coil shocks,compatible with universal coilovers,function form type 1....
Check Stock

VINWOX 20\ Full Size 4 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Carbide Turning Tool, Including Rougher, Finisher, Square Radius, Detailer

  • PRESS ✅PROMOTION or ✅EXTRA SAVING FOR FREE GIFT! The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

HEMUNC 3pcs Oscillating Tool Blades for Grout Removal Tile Mortar Concrete Masonry 1/16, Fit for Dewalt Milwukee Rockwell Bosch Dremel Ryobi Ridgid Multitool

  • ✔Super Value Grout Removal Blade For Oscillating Tool: contains 3pcs 3-5/8 Inch Half-moon carbide grout removal blade which is a great multitool blade attachment for cutting on fillers, tile adhesive, concrete, mortar, ceramic grout and soft stone. The Semicircle carbide oscillating grout blade allows you to cut into concrete and defective tile joints with its sharp carbide grains..
  • ✔ High Quality Blade For Oscillating Tool: HEMUNC oscillating carbide grout blades are made by Revolutionary Carbide Technology, robust and durable, which works great for back splashes, wall to floor joints in showers etc., the carbide grit lasts up to 2x longer than similar products in the market..
  • ✔ Widely Use Range: This Universal Fit carbide grout oscillating blades is a wide use blade that quickly removes material such as grout, plaster and other adhesive products from floor or wall tiles during replacement or restoration projects, and the thickness of the carbide grit is 1/16", perfect for thicker grout removal, it may not work if you have narrow grout lines..
  • ✔ Compatible With Most Oscillating Mulitools: This carbide oscillating grout blades set are compatible with the majority of the oscillating tool brands such as Dewalt Milwukee Rockwell Bosch Dremel Ryobi ....
Check Stock