Reviews Carbide Cutter

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

Groovemaster Carbide Tungsten Steel Replacement Cutter Head for Golf Club Groove Sharpeners Made by Specialty Golf Products

  • GROOVEMASTER TUNGSTEN CARBIDE STEEL CUTTER HEAD is the replacement cutter head for ANY 6 Head Groove Sharpener made by Specialty Golf Products..
  • REPLACE EXISTING CUTTER HEAD EASILY using existing screw using standard and commonly found 2.5mm hex wrench as in image shown (wrench not provided). Takes less than 2 minutes to upgrade..
  • CLEANS, DEEPENS AND RESTORES WORN GROOVES with the best accuracy of any golf club groove tool on the market. Premium cutter head, made of tungsten carbide steel, cuts through standard steel, titanium and even maraging steel with unmatched ease..
  • MEASURING A HARDNESS OF 65 ON THE ROCKWELL SCALE, this premium cutter head is made from high grade precision tool vacuum heat-treated carbide tungsten steel. The Groovemaster Carbide Cutter Head is the ultimate solution for maximum durability and re-grooving effectiveness..
  • PRECISION GROUND AND ENGINEERED TO EXACTING TOLERANCES to ensure that it does not compromise USGA rules regarding groove width and depth..
Check Stock

Pro Grind Sharpening System For Lathe Turning Tools, Chisels, Skews, Gouges, Bowl Gouges, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Slotted Platform and Tool Rest

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project!.
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws..
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a shearing action as opposed to the traditional cutting method of standard turning tools. The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools..
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long a....
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

SILIVN 5pcs Tungsten Carbide Cutters Inserts Set for Wood Lathe Turning Tools,(Include Square, Square With Radius,Round and Diamond Shaped Cutters) Supplied with 5 pcs Screws

  • 【Exterme Hard Material】：Made of solid tungsten steel,providing you a better experience and durable use..
  • 【Most Practical】：Easy to replace your jointers and planers. Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action.When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw..
  • 【 Perfect for Professional Carpenters and Beginners】：This is a free combination suit that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
  • 【Exteremely Professional】5 different sizes and 4 different shapes carbide inserts satisfy all you demand:Square With Radius (15x15x2.5mm-R50),Square(15x15x2.5mm-4R0.5), Square(14x14x2mm)Diamond Shaped (10mm X 28mm X 2.5mm with Round Point) Round (Ø16mm*3mm-30°).
  • 【Set includes the Cutters only】: Square Cutter *2(Supplied with M6-8 replacement screws ),Square With Radius Cutter*1(Supplied with M6-8 replacement screws ), Round Cutter*1(Supplied with M5-8 replacement screws ), Diamond Shaped Cutter*1(Supplied with M4-8 replacement screws ).....
Check Stock

Glass Cuttings Tools, Professional Glass Cutter with Metal Handle&Oil Reservoir for Cutting Thick Glass and Tiles.

  • [Unique cutter wheel design]: Glass cutter tool with a precision cutter wheel processed by unique technology. Professional precision coordination ensures that the cutter wheel and the cutter plate match precisely, and ensure that there is no deviation during radial cutting, which is convenient for cutting. Zero deviation cutting performance, good bite, not easy to slip..
  • [Industrial-grade glass cutter]: The glass cutter uses cemented carbide and diamond particles, overall heat treatment, high hardness, high cutting precision, sturdiness and durability, and high efficiency. All copper fittings, the cutting life exceeds 100,000 meters..
  • [Self-Lubricating]: Glass cutter with integrated oil reservoir, Long lasting, self-oiling tungsten carbide cutting wheel..
  • [Traditional straight handle design]: Designed for comfort, durability and performance, this industrial-grade glass cutter uses an all-metal handle to ensure user comfort and performance..
  • [Wide application range]: Glass cutter, mirror cutter, tile cutter, glass bottle cutter, thick glass cutter..
Check Stock

Savannah Hollower Replacement Carbide Cutter for Savannah Hollower Carbide Turning Tools

  • Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen....
  • Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply....
  • Carbide cutters don’t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to....
  • This cutter comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the....
  • While carbide cutters are designed to be disposed of when they are no longer sharp enough to cut into your material, you can sharpen these cutters by....
Check Stock

Glass Cutter Kit 2mm-20mm, Alloy Handle Mirror Cutter Tool Alloy Scribe Pen for Thick Glass Mosaic and Tiles - Pencil Shape & Design (Glass Cutter) (Regular).

  • Professional Glass Cutter Tool: Specifications: Product Name: Glass Cutter.
  • Material: Carbide cutter wheel, Alloy handle, Cutting Range: 2-20mm..
  • Glass Cutter Package Includes: 2 × Alloy Handle, 1 × 2-6mm Cutting Head, 2× 6-12mm Cutting Head, 1 × 12-20mm Cutting Head, 1 × Oil Dropper, x1 Alloy scribe pen..
  • Easy to use: Anti-skid durable alloy handle reduces wrist fatigue. When pressure is applied, an automatic oil dispensing system keeps the wheel lubricated every time you cut, making the cutting head more fluent and sharp..
  • Premium Carbide glass cutter, The glass cutter adopts an ultra-strong diamond carbide blade with solid hardness and sharp cutting to guarantee smooth operations, 3 Pieces of cutting heads with different sizes in package, 2-6mm, 6-12mm, and 12-20mm, cutting different glass thicknesses..
  • Wide application: It’s perfect for cutting stained glass and other craft and household uses. A must-have cutter tool for DIY projects. It suits mirrors, windows, glass shelves, stained glass cutting, etc..
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

  • Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
  • Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
  • Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
  • Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
  • no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
  • Designed and Manufactured 100% in the USA.
Check Stock