Reviews Cantilever Gate Wheel

Gate Fork Latch - 1-3/8\ Fork, Wall Mount for Chain Link Fence Gate | Chain Link Fence Hardware | Gate Latch

  • Support Door Weight Up to 500lbs---Tire grade solid rubber material, supper wear-resistant. Hot dipped galvanized finish steel for rust free..
  • Universal Use--- Mofeez gate helper wheel rolls easily over concrete/ grass/ pasture ground. If you plan to use it on soft pea gravel, we suggest you put something in the ground along the wheel path for it to ride more smoothly..
  • Lift your Gate Up to 8-3/4"--- Diameter:6”. There is 8-3/4" from the bottom of the wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4". Width of tire:1-1/2” flat wheel will roll over your driveway's crushed rock surface..
  • Only for Round Fencing Pipe--- Helper gate wheel could be used on both pipe farm gates, chain link gates or any other gate that has a bottom ROUND pipe measuring 1-5/8” through 2”. NOTE: Check your gate frame diameter first..
  • Easy to Install --- Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe..
Check Stock

KHK SUMA2-25, 2, 25 Tooth, Finished Bore Stainless Miter Gears

  • INSTALLATION: this gate castor features a universal mounting plate with 4 holes to easily attach to wooden gates or along horizontal or vertical rails of a tubular farm gate.
  • PERFORMANCE: The gate caster wheel has a maximum load capacity of 440lbs and can also withstand exposure to chemicals and solvents.
  • SHOCK ABSORBTION: gate caster wheel Built-in spring-loaded clamp acts as a shock absorber when gate caster is rolling over uneven or rough surfaces.
  • SPRING-LOADED: heavy duty gate fence wheel Allow gates to open and close freely by automatically adjusting height on uneven ground while eliminating gate sag.
  • DURABLE: rubber gate caster wheel is made from nylon and metal material, srtong and durable for long time use.
Check Stock

Mofeez Gate Wheel for Metal Swing Gate with 1-5/8\ Thru 2\ Gate Frames, Gate Support Wheel for Chain Link Fence, Prevent Gate from Dragging

  • Support Door Weight Up to 500lbs---Tire grade solid rubber material, supper wear-resistant. Hot dipped galvanized finish steel for rust free..
  • Universal Use--- Mofeez gate helper wheel rolls easily over concrete/ grass/ pasture ground. If you plan to use it on soft pea gravel, we suggest you put something in the ground along the wheel path for it to ride more smoothly..
  • Lift your Gate Up to 8-3/4"--- Diameter:6”. There is 8-3/4" from the bottom of the wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4". Width of tire:1-1/2” flat wheel will roll over your driveway's crushed rock surface..
  • Only for Round Fencing Pipe--- Helper gate wheel could be used on both pipe farm gates, chain link gates or any other gate that has a bottom ROUND pipe measuring 1-5/8” through 2”. NOTE: Check your gate frame diameter first..
  • Easy to Install --- Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe..
Check Stock

8-inch Gate Wheel Casters Kit with Spring - Improved 2022 Model - Flat Free Tire with Suspension - 360 Degree Swivel - up to 200lb Proved Load Capacity

  • EFFORTLESS GATE OPERATION: The gate wheel is designed to make opening and closing heavy gates easy and effortless. It acts as a support system for the gate, allowing it to roll smoothly along the ground without any resistance. This makes it easier for individuals to open and close gates, especially if they are heavy or cumbersome..
  • SMOOTH RIDE WITH IMPROVED SUSPENSION: Comes with 8-inch pneumatic rubber tires that are designed to provide a smooth and comfortable ride. The tires are made of high-quality materials that ensure durability and longevity. The improved spring suspension system provides additional stability, ensuring that the gate wheel remains firmly in place even when the ground is bumpy or uneven..
  • EASY TO INSTALL: Included mounting bracket allows for easy installation on gates of various sizes and styles. The bracket ensures that the gate wheel is securely attached to the gate and can handle the weight of the gate without slipping or falling off..
  • SUPPORTS UP TO 200lb LOAD: Built to handle heavy loads of up to 200lb. This is an important consideration for people who have gates that are particularly large or hea....
Check Stock

6" Gate Wheel Metal Tube Fence Gate Wheel Farm Gate Helper Wheel for Swing Gate Chain Link Gate All Kinds of Terrain Driveway Gate - Fits 1" to 2" OD Round Tube Gate Frames.

  • Large Wheel Design: 6" wheel diameter for easier gate opening and closing, 1.8" wheel width, suitable for all kinds of terrain, concrete, grass and even mud to pavement. The wheels are made of wear-resistant materials and promise more than 20 years of service life..
  • Strong and Durable: The wheels are made of high hardness PVC material, which is very wear-resistant, the wheels center use precision ball bearings, which turn very smoothly, the wheel brackets are made of thick galvanized stainless steel, and the entire wheel has an amazing load-bearing capacity of 600 pounds..
  • Applicable Gate: This wheel is suitable for metal round tube frame swing gates, the diameter of the gate round tube is 1" to 2". Suitable for farm fence gates, driveway gates and chain links gates. Special Note: Please make sure the height of the bottom of the gate and the ground between 3" to 8" before purchasing..
  • Simple installation: Support the gate to a suitable height, and install the wheel on the bottom metal round tube of the gate, tighten the clamp screws, and the two clamps can firmly fix the wheel until the auxilia....
Check Stock

WerkWeit Gate Wheels for Metal Tube Gate 2Pack 6” Heavy Duty Fence Gate Wheel Hot Galvanized Farm Gate Wheel with 1-5/8" Thru 2" Gate Frame Fence Wheels for Gates Prevent Gate from Dragging

  • 【fence gate wheel】WerkWeit Gate Wheels For Metal Tube Gate is suitable for round fence pipe. The bottom round pipe should measure arranging from 1-5/8 inches to 2 inches. Therefore, before purchasing, please be sure to measure whether the diameter of the door frame is suitable..
  • 【Premium Quality】Our fence gate wheel is made of high-quality steel and adopts hot-dip galvanizing process, which can effectively prevent rust under any weather conditions. The wheel is made of solid rubber material which is tire grade and it has great wear resistance performance in various material..
  • 【Up to 500 pounds Support Weight】 The 6-inch gate wheels for metal swing gate have a long service life and can withstand a weight of up to 500 pounds. The bearing is a standard ball bearing with high bearing capacity..
  • 【Easy to Install】Provided with U-bolt and nut, it is easy to install the fence wheels on the gates. Adjust the door wheel to the required height, and install the door wheel on the bottom pipe of the door. At last ,using the U-bolt nut to fix the fence gate wheel..
Check Stock

MLHPeak 3 Inch V-Type Groove Wheel Heavy Duty Rigid Caster with Bracket for Inverted Track Rolling Gate Sliding Gate Industrial Machines Wire Rope Rail Pack of 2

  • Our v-groove wheel is made of 45# galvanized steel which has higher strength, better capability of resisting deformation and corrosion resistance..
  • Size: Overall 3.9"(L) x 1.5"(W) x 3.5"(H), Wheel Diameter 3", Wheel Width 1".
  • LOAD CAPACITY: Each wheel loads up to 660 lbs, great for carry up heavy duty sliding gate. The V-groove wheel slides smoothly and stably.
  • The v-style bracket is manufactured via one time stamping technique which makes it more stable and inside the roller there are two carbon steel ball bearings which makes it more portable and long lasting..
  • WIDELY APPLICATION: Used to inverted track, yard gate, rolling gate, patio sliding gate, industrial machines, wire rope rail device, container racks, baby gate, dog gate.
Check Stock

Sidco Supply 3” Inch V-Groove Gate Wheels Cast Iron Steel Sliding Gate Rollers Metal Gate Wheel Inverted V Shape for Slide Gates with Detachable Bolt V Groove Caster Wheel for Gate 3 Wheel

  • Cast iron V grooved roller wheels high-quality cast-iron steel and black enamel powdered coated finish and weldable gate box.
  • 3" x 1-1/2" v-groove wheels with straight roller ball bearing, detachable bolt and locking nut with 3.75-inch weldable metal gate box.
  • Fits 3 inch and 4-inch gate wheel boxes with 1/2" axle bore diameter with a heavy duty 700 lbs capacity.
  • Crafted from premium cast iron metal steel this gate wheel is perfect sliding gate kit for use as wheels for gates, chain link fence gate rollers, roller casters, fence rollers, cable pulley and driveway gate wheels.
  • Specs: Temperature ranges from -50-degree F to 800-degree F, Hub length can be cut or lengthened with spacers, 3 Year warranty, Wheel: 3” x 3” x 1.5” Gate Box 3.75” x 2.5” x 2.5”.
Check Stock

Sidco Supply 3.5 Inch V-Groove Gate Wheels Solid Steel Sliding Gate Rollers Metal Gate Wheel Inverted V Shape for Slide Gates with Detachable Bolt V Groove Caster Wheel for Gate Weldable Wheel Box

  • Solid precision machined V grooved roller wheels high quality solid stainless steel chrome finish and weldable gate box.
  • 3.5" x 1-5/16" v-groove wheels with sealed straight roller ball bearing, detachable bolt and locking nut with 3-13/16-inch weldable metal gate box.
  • Fits 3 inch and 4-inch gate wheel boxes with 1/2" axle bore diameter, 2" hub length with a heavy duty 1500lbs capacity.
  • Crafted from premium solid metal steel this gate wheel is perfect sliding gate kit for use as wheels for gates, chain link fence gate rollers, roller casters, fence rollers, cable pulley and driveway gate wheels.
  • Specs: Temperature ranges from -50-degree F to 800 degree F, Hub length can be cut or lengthened with spacers, 5 Year warranty, Wheel: 3.5” x 3.5” x 1.81” Gate Box 3.75” x 2.25” x 2.25”.
Check Stock

Ronlap Gate Wheels for Wooden Gate, Spring Loaded Gate Caster Heavy Duty for Metal Tube Swing Gate, Small Fence Gate Support Wheel with Universal Mount Plate, 220 Lbs Capacity, 4 Inches, 2 Pack, Black

  • 【Built-in Spring Design】: Innovative spring built-in-design, extends spring’s service life while providing a more beautiful appearance. The built-in spring-loaded clamp acts as a shock absorber when the gate wheels for wooden gate roll over uneven or rough surfaces, reducing stress on the gate hardware and extending the life of a gate's posts and hinges.
  • 【Spring-loaded Gate Caster】: Adjustable spring bracket with up to 1-3/4” spring-loaded vertical travel, automatically adjusting gate height with surrounding terrain throughout the opening and closing cycles, effectively prevent gates from sagging to keep the fence line level.
  • 【Heavy Duty Gate Wheel】: Thicken matte black power coat finish plating steel plate and double ball bearing bring strong load bearing support, 220lbs maximum load capacity for each gate wheel, make it easy to open or close large heavy wooden gates, vinyl gates, metal tube gates or metal swing gates.
  • 【360° Swivel Fence Gate Wheel】: 4 inches ageing resistance rubber caster with 360° rotation top plate, great in mechanical strength and loading capacity, easily transform to any di....
Check Stock