Reviews Cadmium free Brazing Rods
20 Sticks Aluminum Welding Rods ,20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉,Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair
- 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
- 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
- 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
- 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
- crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
- 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products
- MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
- ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
- PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
- APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
- SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check StockHeyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs
- 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
- 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
- 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
- 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check StockHeyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs
- 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
- 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
- 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
- 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check StockSolderweld SW-HVAK00 Brazing Pack with Carrying Case includes 56% 0% Braze Rods Al-Cop Aluminum to Copper - Alloy Sol Repair Solder Rods Rods and Flux
- 2 sticks of Sil Sol 56% Flux Coated Brazing Rods.
Check Stock25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″
- MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
- ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
- PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
- APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
- crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
- SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)
- MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
- ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
- PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
- APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
- crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
- SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check StockBernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece
- 2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature.
- Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators.
- Used in joining carbon and alloy steels as well as non-ferrous materials.
Check Stock20 Sticks BLUEFIRE JAgP-5 1/2 lb 5% Silver Phos Copper Brazing Alloys Welding Rods Industry BCuP-3 0.050\x1/8\x14\ equivalent to HARRIS STAY SILV 5 Professional Grade Gas Soldering Torch Accessory
- 5% Silver Bearing: USA AWS A58 Class: BCuP-3 brazing alloys rods. Contents: Silver (Ag) 4.8-5.2%.
- Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
- Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
- Best Performances: Solidus Temperature: 1189°F / 643°C, Liquidus Temperature: 1419°F / 771°C. Recommended Joint Clearance: 0.003"/0.006.
Check Stock20 Sticks BLUEFIRE JAgP-15 1/2 lb 15% Silver Phos Copper Brazing Alloys Welding Rods Industry BCuP-5 0.050\ x 1/8\ x 14\ equivalent to HARRIS STAY SILV 15 Professional Gas Soldering Torch Accessory
- 15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%.
- Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
- Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!.
- Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006.
Check Stock