Reviews Cable Railing Kits 2

BLIKA 65 Pack Stainless Steel Protector Sleeves for 1/8' 5/32' or 3/16' Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Cable Railing Protector Sleeves

  • Applications: This Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • Material: Stainless Steel T316 Marine Grade,High tensile strength and anti-fatigue strength Weatherproof..
  • Size: Suitable for 1/8" 5/32" or 3/16" cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.48 inch, Required Hole Diameter = 0.258 inch..
  • Easy to Install: This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Cable railing system requires hardly any maintenance..
  • Package Includes: 65 Pcs Stainless Steel Protector Sleeves and A Free Drill Bit..
Check Stock

BLIKA 120 Pack Stainless Steel Protector Sleeves for 1/8' Wire Rope Cable Railing, Cable Railing Protector Sleeves, Deck Cable Railing Kits

  • Applications: This Stainless Steel Protector Sleeves for 1/8" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • Material: Made of Stainless Steel T316 Marine Grade, High tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance..
  • Size: Suitable for 1/8" cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.474 inch, Required Hole Diameter = 0.251 inch..
  • Feature: This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • Package List: 120 Pcs 1/8 inch Stainless Steel Protector Sleeves and A Free Drill Bit..
Check Stock

Wayska 60 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector for 1/8" Wire Rope Cable Railing, Come with a Free Drill Bit

  • 【High Quality Material】- This 30 degree 1/8” wood post protector is made of T316 marine grade stainless steel, high tensile strength, anti-fatigue strength and waterproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance. .
  • 【Compatibility & Parameter】- These stainless steel protector sleeves suitable for 1/8”cable railing, perfect for outdoor and indoor cable railing system. Tilt Angle = 30 Degree, Overall Length of Sleeve = 1.1", Sleeve Diameter=0.28"，Flange Diameter =0.58"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm..
  • 【Easy to Install】-This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • 【Package Content】- 60pcs 30 degree angle cable protector sleeves + 1pcs drill bit..
Check Stock

Muzata 5pack 1/4"-20 Eye Bolt Heavy Duty Shoulder Lifting Ring Threaded Eyebolts with Nuts Washers T316 Stainless Steel Marine Grade UNC-3A CR31

  • -OD3/32"), WR11(ID3/32"-OD1/8") and wire rope hanging kits Muzata NK15(turnbuckle kits with ID 1/16"-OD3/32"cable), NK05( 1/16"cable kits ), NK04(1/8"cable kits ).
  • Why Choose Us- MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation should be easy and affordable. So we work with every effort to provide quality products and professional service, to make Muzata a reliable brand. Need professional one-stop cable railing solutions, please reach us to get Free design or After-Sales service.
Check Stock

Muzata 45KN Upgraded Custom Hydraulic Hand Crimper Tool for 1/8\ Stainless Steel Cable Railing Kit Hardware Wire Rope Swaging 1Pair Dies with Wire Cable Cutter CR09 CK12, CT1

  • Custom Designed for Stainless Steel -- This hydraulic crimper tool is forged and custom-designed to provide 45KN of crimping force, making it perfect for crimping the stainless steel cable railing kits that require more strength and power. The blade of the cable cutter CR12 is quite sharp and durable. It can make exact and clean cuts up to 5/32" stainless steel cable. Package includes: 1pc hydraulic crimper, 1pair of 1/8'' crimping dies, 1pc cable cutter.
  • Simple to Use -- The crimper is designed with an oil switch knob to control the pressure when you swage. The comfortable ergonomic cushioned handle makes it easy to grip and control. Please note that the knob requires an excess of power to be fully tightened. When you find the crimper could not provide enough pressure, please check the knob and make sure it is fully tightened or need further tightening up.
  • Wide Applications -- This Muzata crimper CR09 fits 1/8" cable railing kits. It also matches regular crimping dies to crimp aluminum ferrules or copper products. We Have Upgraded This Crimper to Resolve the Problems Like Broken Head or Leaking Oil after Repeated Crimping. If You Encounter Situations Like This, Please Reach Us.
  • Pre-Designed System -- We pre-designed a WoodEasy cable railing system to h....
Check Stock

Muzata 40Pack 1/8 Swageless Cable Railing Kit Invisible Terminal Fixed End Toggle Anchor for Metal Post Angle Adjustable T316 Stainless Steel Stair Deck Corner CB17 CV2 CL1

  • Completely Invisible & Multi-angle - Muzata cable railing kit fixed end CB17 works for 1/8" wire rope. It can be easily stuck and completely hidden inside the METAL posts to get a neat appearance. The multi-angle feature enables the toggle anchor terminal to rotate from 0-180 degrees. Note: this cable railing kit ONLY work as a fixed end, it need to work with a tensioner to construct a cable run.
  • ONLY works for hollow METAL posts(20mm≥hole size≥10mm ).Package include:40packs terminals.
  • No Need Crimper and Reusable - With the patent swageless design, you don’t need a Hydraulic Crimper to swage, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • One-Post Corner & Wall Post Solution - With a well-designed compact body, you could use two invisible toggle anchor terminals CB17 at one corner METAL post of 2”x2” to 10”x10”, and they won't hit each other. This fitting is also a great solution for posts against the wall or situations that you are unable to get behind....
Check Stock

Muzata 330Feet 1/8inch Stainless Steel Wire Rope Aircraft Cable Railing Decking 7x7 Strand Indoor Outdoor DIY Balustrade with 1pc Cable Cutter WR01,WP1

  • This is Non-Turnbuckle System according to principle of screwing L&R handed thread lag at the same direction and the both lags will go into the opposite direction，So the cable will be tightened by the R&L handed thread lags without torsion force and damage.
  • The length of cable spanning capability of this kit is the same as other common cable railing kits；.
  • This cable railing hardware was made of Marin Grade T316-Stainless Steel, and it can be used indoor and outdoor.
  • The total length of this lag is 4.1 inch，Length of thread bar is 2 inch，this cable railing lag fit standard 1/8 inch（3.2mm）steel wire rope；and the length of cable is 1 inch shorter than the distance of inner edges of posts which on both sides usually to be recommended；.
  • This Right&Left hand thread screw lags are connected with cable need by using hydraulic crimper(This item not include)，and this item go with a correct size dill bit and a special wrench.
  • When you really understand this non-turnbuckle system，you will find the swage turnbuckles and other trivial parts are not necessary in cable railing system，And this system will be more durable and beautiful..
Check Stock

WELWIK 5PCS 304 Stainless Steel Wing Nut Wire Rope Cable Wire Rope Clips Clamps Locking Device Wing Nut

  • These wire rope locking devices are made of high quality stainless steel with 3 / 32 inch and 1 / 8 inch diameter wires or cables. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
  • You will get: 5 packs of high-quality stainless steel wire rope locking devices..
  • Cable clamps are ideal for rigging ropes, wires and cables in unlimited applications, mainly for shading hardware kits and cable railing installation, rigging, temporary guardrail systems, fixed loads, ships, boats, hanging banners, flags and signs, and basically any cables involved..
  • The wire rope locking device is specially designed to clamp the wire rope on itself, which is very suitable for fixing the thimble of cables and ropes..
  • Perfect match of cable railing Kit. The cable clamp is used for tightening steel wire rope, which is widely used in industry or home decoration, such as tent rope / wiring / railing cable tightening..
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 42 x2 x2 Post Body 39 Adjustable Top Level Line Post Top Mount Stainless Steel Black Finish Wood Concrete Level Deck PS01 BH4L

  • Level line post - This square (2"x2") cable railing post (39" height) is designed for building 42" cable railing projects. It is pre-drilled with 12 level line holes. It can work as both structual end posts and middle posts in level sections.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, if your project is located near the seaside or humid areas, Muzata aluminum posts PD01/PD02/PW01 are highly recommended for its super strong salt tolerance.
  • Code compliance - This structural post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add an intermediate post between two structural posts. Search Muzata PS11 to get matched rectangular intermediate posts. Pls consult local building offices about the rules since there might be different requirements in some states.
  • Related Posts - You might need several post types to build a complete project: search PS01 BH4L for structural line posts, PS11 BH4L for intermediate posts, PS01 BC4L f....
Check Stock