Reviews Deck Man Cable Railing

VOTOER Swageless Wall Toggle Turnbuckle Tensioner Stainless Steel Marine Grade T316 for 1/8\ Cable Size (10 Packs)

  • The deck toggle turnbuckles are made from marine grade T316 stainless steel for maximum strength and durability..
  • The angle of the terminal can be adjusted up to 135 degrees with this toggle turnbuckle, which make them great for stair runs..
  • No special tools required, enables a quick and easy installation which saves time. You'll be enjoying cookouts with friends on your deck in no time..
  • These high quality stainless steel cable railing hardware is perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • The 1/8" cable railing assemblies are a great-looking, easy to install cable railing system, eliminate all of the typical hassles of cable railing installation..
Check Stock

Neitra 30 45 90 Angled Drill Guide Jig for Cable Railing Lag Screw Kit Wood Post, Drilling Degree Angle and Straight Holes, Durable All Metal Drill Jig for Railing Deck Stair Handrail

  • ACCURATE THREE ANGLES: The Neitra cable railing drill guide jig dowel allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
  • FOUR SIZES GUIDE HOLES: With four sizes of drilling guide holes for each angle, 3/8″(9.52mm), 5/16″(7.93mm), 1/4″(6.35) mm), 3/16″(4.76mm), each compatible with most cable railing cable protector sleeves and lag screws. An efficient and compact angled drill guide that is easy to carry..
  • ALL HARD METAL MATERIAL: The drill jig for angled holes is set with ultra-hard chrome-plated steel sleeves, which is wear-resistant, sturdy, and durable, no need to worry about being worn when drilling, and the drilling accuracy is error-free as always. The main body of the railing drill guide is made of high quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, clear markings..
  • EASY OPERATION: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while ....
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit（Single lag screw） made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence…；.
  • This cable railing hardware applies to standard 1/8" inch cable（OD）， Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation；The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage：high quality、easy to install and looks clean..
Check Stock

Muzata 200pack Aluminum Crimping Loop Sleeve for Hanging and Securing 5/32inch(4mm) 1/8\ 1/16\ Wire Rope Single Barrel Ferrule CableLine End CB39

  • ...re loops when anchoring cable by compressing with vise, pliers, compression tool.
  • These wire rope crimp Loop sleeve are made of aluminum alloy, which provides corrosion resistance and attractive appearance and durability to these wire rope sleeves, They are great to work on 5/32" stainless steel cable array for deck railing, properly crimped it will support 200lb load. These wire rope cable sleeves are the most economical solution for dog Leashes, Clothes Lines, Fishing Wire, Deck Railing, Stair Railing, and any other projects require loop ends on wire ropes..
  • Specifically designed for 5/32 In (4mm) Stainless steel cable wire rope, simply slide the cable into the wire rope sleeve, then pass the end of the rope back through the remaining ferrule to form an appropriately sized loop. After using a mechanical or hydraulic swaging tool to obtain the full holding power of stainless steel oval sleeves. It really depends on how good your swaging tool is. Please search B06XD4DY22 to purchase the recommended hand crimping tool..
  • CableGenie system - This product belongs to the wood CableGenie cable railing system, in which we have planned everything you need for a cable railing project. It includes: Cable railing kits (CR73 or CB16).
Check Stock

Yaheetech Patio Deck Tiles Interlocking Wood Composite Deck Wooden Flooring Deck Tiles 12 x 12in Fir Wood Indoor&Outdoor Brown 55pcs

  • Specially for End Post - This cable railing kit is a great solution for posts up against a wall that you can't reach from behind, also ideal for single drilled end posts and corner posts to realize one-post corner solution. This deck railing hardware is installed by simply inserting it into the hole of drilled post and flipping the toggle.
  • Multi-Angled and Wide Adjustment - This tension wire kit can be rotated from 0-180 degrees for both horizontal and angled sections. This turnbuckle also has a wide adjustable range of up to 40ft in a straight run, making it much easier for beginners to install a cable railing system.
  • High Quality- The cable railing kit is made of T316 stainless steel, which is excellent in rust resistance and weather protection. Suitable for both indoor and outdoor, even coastal applications.
  • Pre-designed system- This product belongs to the SpaceSaver cable railing system, in which you can refer to how to build a cable railing project. It includes: Stainless steel side-mounted posts Muzata PF01.
  • Handrails (HT10-flat, HT20-round, HT30-thin).
  • cable cutter and hydraulic crimper CK12).
  • Adhesive washer CR74. For further information please scroll down to" product description" or....
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

Deck Man T316-Stainless Steel Adjustable Angle 1/8' Cable Railing Kit/Hardware for Wood Post，Marine Grade (10 Pack)

  • The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence….
  • This railing kit made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • It applies to standard 1/8″ inch cable， Hydraulic crimper is needed to connect this kit with the cable and 4# dies is suitable.
  • Max expanding size of the Swage Turnbuckle is 10 inch and it can be retract to 7 inch.
  • this item include 40 Pcs stainless steel countersunk screws and 1 pcs drill bit for wooden post, length of screws is 1.2inch；.
  • Under strict process control and with advanced technology, our products have high quality and excellent workmanship. We believe that you will like this kit..
Check Stock

Deck Man T316-Stainless Steel Adjustable Angle 1/8' Cable Railing Kit/Hardware for Wood Post，Marine Grade (30 Pack)

  • The angle of this professional cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence….
  • This railing kit made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • It applies to standard 1/8″ inch cable， Hydraulic crimper is needed to connect this kit with the cable and 4-6# dies is suitable.
  • Max expanding size of the Swage Turnbuckle is 10 inch and it can be retract to 7 inch.
  • this item include 120 Pcs 304-stainless steel countersunk screws and 1 pcs drill bit for wooden post, length of screws is 1.2inch；.
  • Under strict process control and with advanced technology, our products have high quality and excellent workmanship. We believe that you will like this kit..
Check Stock

Lulultn Cable Railing Hardware, 30 Pairs Cable Railing Kit,Steel Cable Railing Kit,for 1/8 Cable Railing System, Adjustable Angle,T316 Marine Grade

  • Uses: This kit needs to be connected to the cable using a hydraulic crimping machine, it can be used for inclined stair railings or horizontal cable guardrails, deck railings and garden fences.
  • Material: The railing kit is made of high quality marine grade T316 stainless steel, which is rust-proof, more durable and beautiful and easy to maintain.
  • Features:Fit for 1/8″ stainless steel cable,This adjustable angle cable railing kit has 180° angle freedom adjustable base, suitable for outdoor or indoor use.
  • Dimensions: 1/8″ inner diameter, ideal for connecting to 1/8 inch stainless steel cable to wood post and metal post.
  • Packaging: 30 Pcs Deck Toggle Turnbuckles, 30 Pcs Deck Toggle Ends and 123 Pcs (3 spare) of stainless steel countersunk head screws and 1 pcs drill bit for wooden post, 1 pcs tightening rod,1 multifunctional small wrench ..
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ 3/16\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR91,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(5mm),OD-3/4"(19mm),thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32" 3/16" cable on level, fit 1/8" 5/32" cable at 30°angle. Please check the image to find the compatibility table for further models. Cable railing kit CR73 is recommended to work with CR91 for wood invisible cable railing system.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a CableGenie wood cable railing system to help you get a fully customized project, which includes cable railing kit CR73,1/8” wire rope WR02, adhesive sleeve CR91, drill guide CT19, crimper and cutter CT01, socket wrench ....
Check Stock