Reviews Butyl Surrounds

Goldwood Sound, Inc. Stage Subwoofer, Rubber Surround 8\ Woofers 190 Watts Each 8ohm Replacement 2 Speaker Set (GW-8028-2)

  • 2 Goldwood Sound GW-8028 butyl rubber surround 8" woofers, 100 watts RMS and 190 watts Max each, 25 - 6000Hz frequency response, 90dB SPL, 8ohm.
  • 1.5" aluminum voice coils, 20oz magnets with bumper plates and vented pole pieces, poly mica cones with butyl rubber surrounds.
Check Stock

BIC America Patented 625-Watt FH56-BAR Sound Bar with 3-5 Discrete Channels and Flush Wall Mounts

  • Patented 3 or 5 discrete channel sound bar system.
  • Three 6-1/2 in. mid/high frequency horn tweeters with neodymium magnets deliver highs beyond audible range and extremely accurate mid frequencies..
  • Two 6-1/2 in. injection-molded woofers with butyl-rubber surrounds enable extended bass output down to 37 Hz.
  • Two 4-1/4 in. side-mounted surrounds for true rear channel effects..
Check Stock

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Plastic Basket, Butyl Rubber Surround & 40 Oz Magnet Structure Wire Installation Hardware Set Included Pyle PLG6C

  • ...pensates the undersized wire found in many of today’s cars. Includes grills, wires, and mounting hardware. Midrange tweeter helps to provide smooth & loud sound.
  • 400watt 2way custom component system includes pair of woofers, tweeters, and crossovers.
  • 6.5inch woofers with yellow poly injection cones and butyl rubber surrounds.
  • 0.5inch silk dome tweeters with neodymium magnets and multiple mounting options.
  • Pair of passive crossover networks with 12 dB/octave slope.
Check Stock

Two-Way Component Speaker System – One Pair 6.5” Two-Way Component Kit, 360 Watts w/ 4 Ohm Impedance and 1” High-Temperature ASV Voice Coil (Pair) – PL650CBL

  • 360 MAXIMUM WATTAGE: Upgrade your vehicle’s speakers and blast your music with this two-way component speaker system’s maximum wattage of 360 watts! It also features butyl rubber surrounds, providing durability & deeper mid-bass impact.
  • FLUSH AND SURFACE MOUNT CAPABILITY: Whether you want this flushed or just on the surface of your system, you can mount it with this two-way system’s included mounting hardware. These speakers have a mounting depth of 2.32”.
  • ENSURES LOW DISTORTION: With this speaker system’s non-fatiguing butyl rubber surrounds combined with its 1” high-temperature ASV Voice coil,you can be sure that the sound quality it produces is still amazing even when you utilize its maximum wattage.
  • AMAZING SOUND QUALITY: With 2 included mid-woofers, 2 tweeters, and 2 crossover networks, this two-way component speaker system gives off a clear sound and emphasizes high frequencies.
  • SPEAKER DIMENSIONS: This two-way component speaker system is measured at 6.56” x 6.56” x 2.95” and 7.01” x 7.01” x 3.15” with the grilles attach and features a blue poly injection cone. It also includes a 10 ft. Power Cable.
Check Stock

Hifonics Thor Ten Speaker Powered Sound Black TPS10

  • Eight 3 inch High Energy Specialized High Efficiency Drivers with poly composite cones and Butyl rubber surrounds that produce more volume over....
Check Stock

(4) MB QUART FKB116 6.5' 240 Watt 2-Way Car Audio Speakers

  • MB Quart Formula 6.5 inch 3-way coaxial car speakers with aluminum dome tweeters and Butyl rubber surrounds..
  • 1" Aluminum Dome Tweeter, Frequency: 40Hz - 22kHz, Impedance: 4 Ohms, Sensitivity: 88dB,.
  • Mounting Diameter Cutout: 5.59, Outside Diameter: 7.01, Mounting Depth: 2.13.
Check Stock

Skar Audio SPX-65C 6.5\ 2-Way High Performance Component Speaker System - Set of 2

  • Pmi Composite Multi-Layered Cone And Premium Butyl Surround.
  • 1-Inch High Performance Aluminum Dome Tweeters With Silk Surrounds.
Check Stock

MB Quart FSB216 Formula Series 6.5\ Component Speaker System

  • WIDESHERE creates a large "sweet spot" for all listeners, even from the smallest speakers.
  • Aluminum dome tweeters deliver high output, extended frequency response & natural music reproduction.
  • Butyl rubber surrounds provide durability & deeper mid-bass impact.
  • Textured ABS gasket assures a rigid linear seal to the mounting surface.
  • Pure copper voice coil creates a strong magnetic field with a very thin extrusion.
Check Stock

KLH Concord 2-Way Floor Standing Speaker - Each (European Walnut)

  • 2.5-Way bass reflex system with 2 x 6.5” Woven Kevlar bass driver and a high performance 1” Anodized Aluminum tweeter with a linear response faceplate.
  • Butyl rubber surrounds and braided tinsel leads on all drivers.
  • Frequency response: 28Hz-23KHz+/- 3dB - Power handling: 225 watts.
  • Chrome plated steel spikes OR rubber feet for proper decoupling.
  • Magnetic Grilles featuring a custom honeycomb design with NO visible fasteners for durability & a flawless appearance.
Check Stock

KLH Concord 2-Way Floor Standing Speakers - Pair (European Walnut)

  • Includes 2 KLH Concord Floorstanding Loudspeaker, 2.5-Way Bass Reflex with Woven Kevlar Drivers - European Walnut.
  • 2.5-Way bass reflex system with 2 x 6.5” Woven Kevlar bass driver, and a high performance 1” Anodized Aluminum tweeter with a linear response faceplate..
  • Butyl rubber surrounds and braided tinsel leads on all drivers..
  • MDF construction featuring custom designed internal low resonance driver chambers and bracing optimized through finite element analysis..
  • Stamped steel driver baskets, featuring oversized magnets for superior control and output..
Check Stock