Reviews Bumper Plate Protector

4Bumpers Prime+ The Best Solid Steel License Plate Frame Parking Bumper Protector Black

  • Great 24/7 protection for your bumpers when securely attached to license plate area in bumper..
  • 4Bumpers US patented design prevents dings and scratches during parking by providing approximately 4 inches from other bumpers..
  • 4Bumpers attaches at the license plate level and therefore provides protection only when your license plate is located in the bumper and not above in....
  • Made in the USA, 4Bumpers is the best US patented solid steel license plate frame bumper protector..
Check Stock

Car 2.3" Thick Rubber License Plate Mount Protects Bumper License Plate Bumper Fit for Cars, Trucks, SUVs, and Vans

  • Comprehensive protection for license plate: this rubber license plate frame protector is made of heavy-duty rubber material and with 2.3 inches thickness, can protect your car from bumper depression and scratches at rear-end collision or other accidents..
  • It's the biggest and thickest front bumper guard measuring 14inches wide and 2.3inches thick,It's noticeably wider and taller than a standard license plate frame.The ornate arches and sharp angles enhance the look of your front bumper, while providing maximum protection from low impact parking bumps..
  • All you need is the screwdriver you used to remove your license plate! The license plate bumper guard comes with thick adjustable mounting tabs, 4 mounting screws, 4 washers, and 4 screw caps for an easy and quick installation..
  • This unique number plate frame is designed to fit all standard license plates in the United States. It effortlessly fits standard Canada sized license plates of all car brands..
  • When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation..
Check Stock

Rexka 20pcs 10mm Hole Bumper Engine Cover Fender & Grille Clips Compatible with Subaru 909140007 Baja Forester Impreza Legacy Outback Tribeca 2011-2000

  • ...r Retainer Clip, Lower Bracket Retainer Clip, Fender Liner Retainer, Suspension Cross-Member Clip, Wheelhouse Liner Retainer, Grille Assembly Clip, Plate Clip, Pad Clip, Bumper Cover Fastener, Reinforcement Fastener, Guide Clip, Side Retainer Rivet, Upper Quarter Trim Fastener..
  • Upper Seal Clip, Corner Support Clip, Protector Clip, Under Cover Retainer Clip, Upper Bracket Clip, Grille Bracket Clip, Lower Bracket Clip, Retainer Plate Clip, Upper Plate Clip, Bracket Clip, Fog Lamp Assembly Clip, Side Bracket Retainer Clip, Upper Cover Retainer Clip, Cover Plate Clip, Hole Cover Clip, Pillar Trim Clip, Closure Panel Clip, Spoiler Clip, Protect Shield Clip, Backup Lamp Clip, Duct Clip, Outer Cover Clip, Bumper Cover Retainer, Bumper Cover Side Bracket.
  • Replaces Subaru: 90914-0007 Fits: Subaru: Ascent, B9 Tribeca, Baja, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, Tribeca, WRX, WRX STI, XV Crosstrek.
  • Head Diameter: 21mm Stem Length: 15mm Fits Into 10mm Hole.
  • This is the most common Clip for Subaru cars. Commonly Used in Front Bumper, Front Grille, Front Suspension, Fuel Tank, Mudguard,Under Cover & Exhaust Cover, Inner Trim..etc.
Check Stock

AUXMART Front Bumper Lip Universal Carbon Fiber Spoiler Splitter Kit Fit for Most Vehicle Compatible with Honda Civic BMW Benz Ford and More 3-Pieces Round Corner Design

  • 【UNIVERSAL FRONT BUMPER SPOILER】This front bumper lip is suitable for most models, because the three-section front shovel joint can be freely....
  • 【PROVIDING PROTECT】This splitter protector is protect your car from scratches/bump and any undesired damage caused by a collision..
  • 【EASY TO INSTALL】 The angle between the plate and the plate can be flexibly adjusted. Just find the right angle, and then drill and fix the front....
  • 【PREMIUM MATERIAL】Universal front lip splitters is made of high quality PP material,which is strong and durable, high temperature resistance, and....
  • 【PACKAGE INCLUDES】Set of 3 piece designed front bumper lip with all required hardware.The set up take about 15 minutes..
Check Stock

Goodream Rear Bumper Protector Guard,Universal Black Rubber Scratch Resistant,Trunk Door Sill Protector Exterior Accessories Trim Cover for SUV/Cars,Easy D.I.Y. Installation(35.8Inch)

  • HIGH-QUALITY MATERIALS : The Goodream rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation..
  • MULTI-FUNCTION : This rear bumper protector effectively protect car rear bumper when loading or unloading luggage, groceries, tools box and so on, It prevents nasty scratches and provides protection. Also it can be used to cover any existing scratches, paint damage..
  • ♡ELEGANT DESIGN♡: The Goodream rear bumper protector guard have fashion modelling to make your car looks more sports as well as beautiful. ANTI-SLIP DESIGN of this rear bumper protector, groove design and non-slip function, can effectively prevent the falling of things that you temporarily put..
  • EASY INSTALLATION:This scratch-resistant rubber bumper guard is very durable,flexible, and bendable (will not crack or break), glue tape is coming under the trim, just stick on sill, easy to install..
  • COMPATIBILITY: 35.8inch*2.8inch . The Goodream rear bumper protector fit for all cars with Rear guard. （Case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order ....
Check Stock

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock

Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 80 lbs)..
Check Stock

Universal Car Bumper Protector Rubber, Anti-Collision Front and Rear Rubber Strips for Car Bumpers Side, Not Easy to Fall Bumper Protector Trim Guard Strip for Sedan SUV MPV Pickup Truck (8 Pcs)

  • 【Upgrade glue】This car bumper protector rubber uses upgraded double-sided 3M glue that won't fall easily and can be firmly adhered to your car.【Notice!】Clean the car surface before using the rubber strips, and the surface do not touch water within 24hrs after sticking for better product experience!.
  • 【Comprehensive protection】This bumper guard strip can be glued to the front and rear bumpers and front and rear doors of the car. This bumper protector trim for car effectively protects your car from scratches and scratches..
  • 【Easy to install】 This universal bumper guard protector car can be used immediately after tearing off the protective film on the surface. The rubber strips for car bumper takes up a small space and can be easily stored. Product size: 10.7inch * 1.25inch.
  • 【Soft material】 This car anti-collision strip is made of high quality soft material, which has good flexibility and durability without hurting the paint. This car bumper protector front and back can protect and decorate the car..
  • 【Compatible with multiple models】 The package includes 4 anti-collision bumper protector, and is suitable for various models of Sedan,SUV,MPV,Pickup,Truck. We provide one year of quality support for this front and rear bumper protector. I....
Check Stock

Advgears Rear Bumper Protector Guard Universal Black Rubber Scratch-Resistant Trunk Door Entry Guards Accessory Trim Cover for SUV/Cars(40.9Inch)

  • Great Material: This rear bumper protector is made of high quality silicone polymer material, heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A), High Elongation. Very useful automotive exterior accessories!.
  • Multi-Function: The rear bumper guard effectively protect car rear bumper when loading or unloading luggages, groceries, tools box and so on. Our car accessories prevents nasty scratches and provides protection. Also the bumper guards for cars can be used to cover any existing scratches, paint damage..
  • Unique Design: ANTI-SLIP DESIGN of this car bumper protector, groove design and non-slip function, can effectively prevent the falling of things that you temporarily put. Great suv accessories!.
  • Light Weight: This scratch-resistant rear bumper protector guard is very durable, flexible, and bendable (will not crack or break), glue tape is coming under the trim, just stick on sill, easy to install..
  • Satisfaction Guaranteed: Your purchase is fully protected when you order this rubber bumper protector for cars today. If you ....
Check Stock

Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck (Textured Black)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a skid plate for engine protection. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light.
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate.
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.
  • Order will be shipped in 2 packages. Package 1: Assembled front bumper.
  • 1×120W LED light bar(22 inches) and 2×18W LED cube lights. Mounting hardware accessories.
  • Installation instruction. Package 2: Assembled rear bumper.
  • Front bumper weight about 105 lbs. Rear bumper weight about 92 lbs.
Check Stock