Reviews Built In 2 Motor

6 Pack Mini L298N DC Motor Driver, MELIFE MX1508 Mini Dual Channel 1.5A 1.5A 2 Way PWM Speed Controller Dual H-Bridge Replace Stepper

  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots..
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor..
  • Supply voltage 2V -- 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed..
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped..
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered..
Check Stock

Makita JS1602 16 Gauge Shear, Blue

  • Powerful 3.3 AMP motor delivers 4,000 SPM for the most demanding applications.
  • Smaller circumference barrel grip (only 2-1/4”) for added comfort.
  • Refined design at only 3.4 lbs. for increased control.
  • Lock-on slide switch for continuous operation.
  • Built-in thickness gauge for added convenience.
  • Powerful 3.3 AMP motor delivers 4,000 SPM for the most demanding operations.
  • Small Circumference Barrel Grip (only 2-1/4”) for Added Comfort.
  • Refined Design at only 3.4 lbs. for Increased Control.
  • Built-in Thickness Gauge for Added Convenience.
Check Stock

DEWALT DXCMV5048055 Two-Stage Cast Iron Industrial Air Compressor, 80-Gallon

  • The DEWALT 2 stage air compressor is built with a 5-HP TOPS motor to provide long life and quiet operation, Air Compressor Voltage: 230.
  • The integrated control panel has a tank and pressure gauge and 2 quick-connects for convenient control, Air Delivery SCFM @ 175PSI (CFM): 17.
  • This compressor delivers plenty of air to run multiple tools at the same time to get the job done faster, Air Delivery SCFM @ 100PSI (CFM): 17.9.
  • The thermal overload protection system motor protects the motor from voltage fluctuations, Nozzle Fitting Size: 3/4-in, Horsepower: 5.
  • This air compressor comes from the factory with synthetic blended oil already installed, Height (Inches): 80, Length (Inches): 31.5, Width (Inches): 34.7.
  • Built to perform with a patented pump design that provides longer life by running cooler, Pump Type: Oil-lubricated.
Check Stock

Lingxuinfo Weapons Pack, 52 PCS Sci-fi Style Military Army Weapons and Accessories Set Building Block Toy - Compatible with Major Brand

  • The rechargeable building block battery box has a built-in 3.7V lithium battery, which is compatible with independent plug components building blocks and technology building blocks series..
  • M Motor: working voltage is 9V, which is compatible with independent plug components building blocks and technology building blocks series..
  • With Overload Protection: Within 10 seconds of blocking, the PTC will work (that is, the motor does not work) and the motor will resume normal rotation after power failure..
  • Servo Steering Motor: Size: working voltage is 9V, cross hole can be rotated by ±90 degrees, compatible with independent plug components building blocks and technology building blocks series..
  • Remote Control: Size: 2.4G remote control built-in 4CH receiver, need to install 2 x 1.5V AA batteries(not included), compatible with technology building blocks series / bump brick.
Check Stock

Dumble 12V RV Vent Fan Motor Replacement with D-Shaft – RV Fan Motor, Camper Vent 12 Volt Motor, RV Exhaust Fan Motor

  • GOODBYE MOISTURE & SMELLS: Use the Dumble RV Supplies Bathroom Fan Motor 12V Vent Hood Motor with your existing fan to rid your RV, camper, or travel trailer of lingering smells and built-up moisture.
  • This roof vent motor is quiet and can be used to power an RV vent fan such as a bathroom fan or a range hood fan.
  • EASY TO INSTALL: Wire your fan to the motor switch, then wire the switch to your RV.
  • Ensure that the wires connect black to black (grounds) and the other wires connect together.
  • Save your old fan blades – Pull on the hub (center part of blades) off the shaft and push blade center hub back on the new motor shaft (Flat side on motor shaft used to align hole in hub and slide on).
  • 3mm mounting screws and fan blade not included.
  • ROTATION: This bathroom vent fan motor replacement has reverse polarity, meaning that it can be wired to turn in either clockwise or counter-clockwise rotations.
  • Rotation direction depends on your fan blade wiring (one wire goes to the hot side of switch, other goes to ground).
  • To determine the direction of spin on your existing fan, look down through the motor at the top of the blade.
  • FITS YOUR RV: 1/8-inch diameter x 3/5-inch length (3.17mm x 15mm) half-moon (D-shaped) shaft.
  • 1-2/5-inch diameter x 2-1/5-inch length (36mm....
Check Stock

Intex Motor Mount Kit for Intex Inflatable Boats

  • Fishing and relaxing have never been easier with the 2 built-in fishing rod holders and gear pouch.
  • A grab handle on the bow and an all-around grab line are provided for your convenience, as well as welded oar locks, and oar holders.
  • Comes with 2, 48-inch French oars and a high-output pump for easy inflation and deflation.
  • Motor mount fittings are included for the flexibility of adding the Intex motor bracket and trolling motor.
Check Stock

Aideepen 5pcs Dual H-Bridge DC Stepper 1.5A 2 Way DC Motor Driver Module Replace Stepper L298N for Smart Car Power

  • Use of imported original chip, built-in low on-resistance MOS switch.
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
  • Minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
  • Small size, light weight, low standby current, is the ideal choice for your car model.
Check Stock

Commercial Sliding Gate Opener Eagle-2000 FR 1/2 Horse Power Motorize Slide Gate Operator for Large 45’ feet Gates or 1000lbs Weight Capacity with 2 Wireless Remotes, 1 Receiver, and Photo Eye.

  • The Eagle-2000FR- 1/2 Motorized Slide Gate Operator is designed for Commercial Large Gates up to 45’ feet and 1000lbs weight capacity. Build with a Heavy Duty idler wheels making the opener quiet and smooth when operated..
  • Package Kit Includes – Eagle-2000FR Slide Gate Motor Operator, 2 Wireless Visor Transmitters Remotes, 1 Long Range Receiver, (2) 10ft Nickle Plated Chain, and 1 Reflective Photo Eye. We also provide a 5-Year Limited Manufacturing Warranty..
  • Easy to Install – The Industrial Gate Opener is designed with The Eagle Diamond Board the most advanced and user friendly control board in the market. The Gate Systems control board is equipped with features like Anti Tailgating, Partial Open and Auto Close Timers..
  • Safety – Built with a Foot Pedal Release Mechanism. In case of an emergency or a power outage the foot pedal provides the Sliding Gate Operator to be operable manually by simply pushing the gate open. It also Includes a lighting and surge protection built in..
  • Hardware – The Sliding Gate Operator System has a 1/2 Heavy Duty Horse Power Motor making it ideal for heavy vehicle traffic properties. Additionally, it is built with an Open/close delay and Motor brake disengaging chain mechanism..
Check Stock

DEWALT Portable Band Saw, Deep Cut, 10 Amp, 5-Inch (DWM120K)

  • Sub-Compact cutting solution designed for one-handed operation in tight spaces and overhead applications.
  • ideal for cutting multiple types of materials.
  • Makita-built BL Brushless Motor delivers 0-630 ft./min. variable blade speed for faster and more efficient cutting.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load during challenging jobs.
  • Overload protection is designed to protect the motor from burnout in abnormally high torque situations.
Check Stock

Home Decorators Collection

  • Award winning modern ceiling fan fixture design and lifetime durability this name brand ceiling fan is made to last a lifetime. This stunning and newly updated fan has even built with more durable materials, quiet motor technology with powerful motor and brilliant led lighting. Equipped with 5 silver blades with 14˚ blade pitch for superb air movement, Includes an integrated light kit with etched seedy glass, Hand held remote control offers 3 speeds with independent light and speed controls.
  • Galvanized finish provides a rustic/retro look indoors or outdoors, Weather-resistant blades and wet-rated housing allow for indoor or outdoor use, Ideal for large rooms up to 20 ft. x 20 ft. with blade sweep of 54 in..
  • Uses one 14-Watt CFL bulb (included,) Dual-mount installation for standard and sloped ceiling applications, Includes coordinating 4-1/2 in. downrod with 3/4 in. Dia, 172 mm x 20 mm reversible motor offers superior air movement.
  • Includes coordinating 4-1/2 in. downrod with 3/4 in. Dia.
  • 172 mm x 20 mm reversible motor offers superior air movement.
Check Stock