Reviews Brookfield Viscometer - BestBuyersPro.com

BAOSHISHAN Rotary Viscometer Viscosity Tester 10-100,000mPa·s Fluidimeter Meter Newton Liquid Viscometer (NDJ-1)

[±5% ACCURACY] The viscometer uses a graduated disk, and the viscosity values are measured by moving the rotor rotation through the spinneret and spindle, has a large viscosity measurement range 10-100,000cps and the measurement error: ±5%, give your enough resolution to control my processes better..
[ROTORS x ROTATION RATE] Different rotors (1,2,3,4) can be selected according to the viscosity range of different test liquids, and different speed (60,30,12,6) can be set. The knob adjustment is straightforward with a coefficient table on the top for easy reference. You can unlock more unknown liquid viscosity..
[LIGHT WEIGHT BUT PRACTIALl] The rotary viscometer is light in weight, easy to move and operate flexibly. The helical gear lifting system effectively ensures that the viscometer can move up and down easily without sliding down by itself, which ensures the smooth progress of your experiment..
[APPLICATION] NDJ-1 has been widely used to determine and measure the liquid viscosity in many application such as grease, painting, plastic, pharmacy and adhesives. There are no limitations about the liquid, just put the rotor into the liquid and test it. But the liquid you measure should NOT exceed 80℃.
[GOOD WARRANTY] Viscosity meter tester is a precison ....

5 Milwaukee Premium Hubbed Grinding Wheels | 4-1/2-Inch X 1/4 X 5/8-Inch | 11 UNC - For Metal & Stainless Steel.
1/4" Thick Type 27 Depressed Hubbed Grinding Wheel Design For both Maximal Stability & Long Lasting Life.
Single Step Mount & Grind Wheel without the need for a Grinder Inner Flange or Locknut.
Engineered in Brookfield WI for Milwaukee 4-1/2 inch Angle Grinders & other 4-1/2 inch grinders with standard 5/8" - 11 UNC spindle thread | Coarse 24 Grit Count For Aggressive Grinding Action.
Consistent performance from wheel to wheel through superior manufacturing process. Tested for balance, resulting in smooth, vibration free grinding. Milwaukee Electric Tool Corp, Brookfield WI 53005 USA.

10 Milwaukee Premium Type 1 Metal & Stainless Steel (INOX) Cutting Wheels | 4-1/2-Inch x .045-Inch x 7/8-Inch.
Extremely thin .045-inch wheel design for fast, straight cuts with minimal burr.
Industry's fastest rotating cutting speed for maximum productivity with the most demanding Metal & Stainless Steel cutting applications | Cuts up to 50% Faster, Lasts up to 20% Longer than Industry Standard 1/8" cutting wheels.
Engineered in Brookfield, WI for Milwaukee 4-1/2 inch Angle Grinders & other 4-1/2 inch grinders with standard 5/8" - 11 UNC spindle thread.
Consistent performance from wheel to wheel through superior manufacturing process. Tested for balance, resulting in smooth, vibration free cutting. Milwaukee Electric Tool Corp, Brookfield WI 53005 USA.

[APPLICTIONS]: This viscometer is mainly used to measure the absolute viscosity of the Newtonian liquids and the apparent viscosity of the Non-Newtonian liquid. Such as inks, paints, coatings, adhesives, greases, juices, dairy products, cosmetics, pharmaceuticals, biological fluids, rubber, mud, pulp, etc..
[PARAMETERS]: Measuring range:10-6,000,000Mpa.s, model: NDJ-9S, accuracy: ±3%, rotor type: #1, #2, #3, #4, rotating speed: 0.3,0.6,1.5,3, 6, 12, 30, 60rpm/min, voltage: 110V. For low-viscosity liquid, please equip with #0 rotor..
[DIGTAL CONTROL]: This unit adopts backlight LED screen, which will display the data more clearly. Rotor, rotating speed, viscosity and temperature are all displayed on the screen. Micro computer control, easy to operate. Data transfer software is installed..
[AUTO SEARCH]: This viscometer is functioned with auto search. You can enter to get the right rotor according to the viscosity of your liquid sample liquid. It will effectively reduce the measuring errors in the experiment..
[INGENIOUS DESIGN]: Level bubble&spike screws on the base help you get the right angle. Stainless steel rotor fender bracket will also reduce the measuring error owe to rotor shaking..