Reviews Brazing Filler Materials

Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece

2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature.
Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators.
Used in joining carbon and alloy steels as well as non-ferrous materials.

Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....

Optimized Heat Dispatching: Thermaltake R Series Radiators deliver an average heating load of 32℃-35℃. After brazing, the fin and tube connect to form a joint, thereby creating uniform heat transfer..
Slim Form Factor Design: R Series is a slim radiator with a 13-set flat tube design to increase heat transfer. Water flows down on one side, and then circulates back to the other side of the radiator..
High-Density Fin Design: The cooling performance improves significantly with increased fan speed, offering exceptional cooling performance during operation. FPI (fin per inch): 17..
German-Made Anti-Corrosion Materials: Designed with German aerospace-grade materials and constructed with zinc. Corrosion potentials of aluminum alloy with zinc can be reduced by 55.6% after brazing..

Diameter: 5"/125mm, Thickness: 2.4-2.5MM.
Available on both sides can increase service life more effectively..
Not only for grinding, but also for cutting directly..
Removable flange, double-sided use, brazing technology..
Multi-function brazing saw blade,sharp and wear-resistant, can be used for cutting and grinding ceramic tile, marble, quartz stone and other materials.

Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
Centurion series regulators with Protective rubber gauge boots.
Front valve welding handle with stainless steel ball point valves for accurate Gas control.

【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..

LFBF (Fluxcoated low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as....
A “must have” filler metal for every machine shop, LFBF is excellent for building up wearing surfaces or large areas where successive layers must....
READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
Available in different sizes: 1/16", 3/32"and 1/8". Rod Length: 18" for easier maneuverability while welding since flux coated rods cannot be bend.....
Available in different package weights: 1/2 Lb, 1 Lb, 2 Lb and 5 Lb - Choose rod diameter and package quantity from the menu..

A 15-minute, two part adhesive and filler system that eliminates the need for welding or brazing.
Once cured, it can be drilled, sanded, painted or filed.
Resists most automotive, shop and cleaning fluids.
Typical applications include aluminum, steel, brass, bronze, castings and stampings.

Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
Sil-flo is not recommended for ferrous metals such as iron or steel.

Easy loading and unloading, this drill bit can save time and effort which is with clearance hole..
Made of high:quality diamond with long service life, the brazed diamond drill bit can be used with confidence..
Meanwhile, the brazing opener is suitable for all kinds of stone, ceramic, vitrified brick, glass, etc..
The drill bit has high precision and fast drilling speed, entitled with high performance according to strict rule..
High:quality materials with hard and corrosion:resistant, in the process of brazing holes, shaking drilling is needed to facilitate chip removal..