Reviews Brass Extruding Part

Fel-Pro 1885 Oil Pan Gasket Set

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • SUPERIOR SEAL -- Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan.
  • PREVENTS OVERTIGHTENING -- Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable).
  • OE-STYLE REPLACEMENT GASKET -- Engineered for OE-style molded rubber gasket replacement.
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.
  • ENGINEERING EXPERTISE -- Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development.
Check Stock

Oster Beef Jerky Kit White FPSTDHAC01

  • Includes three extruding tips for different size jerky strips.
  • Includes 5 beef jerky seasoning and cure packets.
Check Stock

FEL-PRO OS 34510 T Oil Pan Gasket Set

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • STRONG AND DURABLE -- Features molded rubber over a rigid carrier for durability, precise alignment and fit.
  • SUPERIOR SEAL -- Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas.
  • EASIER TO INSTALL -- One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors.
  • INSTALLATION AID -- SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening.
  • PREVENTS OVERTIGHTENING -- Torque limiters help eliminate overtightening and gasket splitting and extruding.
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.
Check Stock

SBC Oil Pan Gasket Blue for Pre 1979 Early Chevy SB 265 283 327 350 383 400

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • STRONG AND DURABLE -- Features molded rubber over a rigid carrier for durability, precise alignment and fit.
  • SUPERIOR SEAL -- Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas.
  • EASIER TO INSTALL -- One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors.
  • INSTALLATION AID -- SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening.
  • PREVENTS OVERTIGHTENING -- Torque limiters help eliminate overtightening and gasket splitting and extruding.
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.
Check Stock

Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/ Ender 3 V2

  • Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance..
Check Stock

LIVTE Clay Extruder Polymer Clay Cutters Kit - Clay Alloy Rotary Extruder with 20 Molds Discs & 40 Clay Circle Cutters Set for DIY Clay Pottery Crafting

  • 【WHAT YOU GET】In the package you can get 2 pcs of extruders, 20 pcs stainless steel of kinds of patterns and 40 pcs polymer clay circle cutters....
  • 【EASY TO USE】The clay press tool has a design of T-handle which can save your strength when you are extruding the clay. For clay extruding, what....
  • 【SPECIAL DESIGN】The fondant extruders have been designed with a seal ring. With the seal ring can the connection between rubber ring and gun....
  • 【WIDE APPLICATION】 Including 20 unique design stainless steel discs, the extruder kits can be widely used as an ideal helper for artist, baker,....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

Toggle Switch, 6 Pcs Round Rocker Switch, 12 Volt ON/Off Switch with Pre-Wired 6A/250V 10A/125V AC, 12VDC Mini Electrical Switches for Boat, Car etc, KCD1-X-Y

  • Package: 6 Black Push Button Switch with Pre-Wired,Color: Black.
  • Terminal: 2Pin, soldered with 2 wires,Easy to install,Cost savings.
  • Pre-wired Design: The rocker switch is pre-wired with 65mm cable. The connector is covered by rubber and not easy to fall off,Cable length & diameter:10cm/2.94" & 20mm/0.08".
  • Voltage & Current:AC 6A/250V 10A/125V Switching Life: 20000-40000 times,.
  • Snap-In Design: Snap in Design make the switch easy to install. Extruding the plastic part, then Push in to the Panel.
  • Material: plastic and metal,Every switch has passed the qualified test. If you have any quality problems, please contact us and we will provide you with satisfactory after-sales service..
Check Stock

CHUNG Baby Grip Socks Boys Girls Toddler No Show Cotton Anti Slip Non Skid Invisable Summer Thin Low Cut,10Solid,S

  • 【SIZE & PATTERN】Fot age between 2 size or under one size, please choose the bigger one. // Designed with super cute girls color and pattern, multi-color available to match with different outfits..
  • 【SEASONS】: No show socks are suggested for Spring/Summer/Autumn. It is made of moderately thick cotton yarn, soft and breathable. Wearing our socks will not make your kids feel very hot in summer. It can provide foot protection all day long...
  • 【BOTTOM GRIP】 3-12 Months and 1-3 Years socks with beaded grip at bottom for anti-skid, ensure kid's safty when they wear socks play in floor. Size 3-5Years do not have..
  • 【CLOSE SKIN-TOUCH】: our sock are made of premium cotton mixed with super elastic spandex to make sure kids feel comfy with a nice stretch when wearing them all day long. It won’t extruding kids toe..
  • 【SIZE】 Suitable for children ages 0-12Months 18Month 2T 3T 4T 5 Years. A very useful grow up outfits necessary for babies and toddlers. 【USE】 Easy to wear with kids sneaker,sandal,running shoes,converse etc. Invisable socks are with anti-slip silicone at the heel part, will not fall off feet when walking.
Check Stock