Reviews Brass Air Fitting

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

  • Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
  • Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
  • When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
  • Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..
Check Stock

LINACAO 1/2/3Pcs Tools Free Copper Union Fitting with Sweat Solder Joint to Male Threaded Connects Compatible with Use Nominal Size Pipes (Size : 1)

  • This hex nipple fitting Compatible with connecting two threaded pipes with same diameters, and it has a hexagonal head Compatible with an increased bearing surface when adjusting the fitting with a wrench..
  • This fitting is made of Brass Compatible with corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Brass can be connected to copper, Brass, plastic, aluminum, and welded steel..
  • Can be used to connect various pipes, such as air Stone, fuel Stone, water Stone, etc..
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock

H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element

  • PRESSURE REGULATOR: The speed and precision of air flow are controlled by a Regulator, while the air that passes from the Compressor is cleaned by an Air Filter. The Two Brass pipe fitting available..
  • EFFECTIVE AIR FILTER: H.A.K. PNEUMATIC Air Compressor Regulator Filters the moisture and tiny particles from the air to preserve air tools including spray guns, nailers, airbrushes, tyre compressors, inflators, and pneumatic equipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
  • EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
  • AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
  • CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter....
Check Stock

RapidAir MaxLINE Compressed Air Piping 1' Tee M8012 Max Line Rapid Air New

  • MaxLINE 1" piping tee fitting Part Number M8012.
  • This MaxLINE Tee is specifically designed for the MaxLINE 1" tubing made by RapidAir and is great for adding extra tubing in multiple directions or adding extra air outlets..
  • This fitting is made of solid brass and has a double o-ring seal for a no leak connection..
  • It has split ring connections for easy disassembly if needed, and is rated for 175 PSI working pressure..
  • Solid Brass with Nickel Plating for Maximum Corrosion Resistance.
Check Stock

Metaland Brass 1/2 Barbed Tee Fitting 3 Way T Shape Adapter with Hose Clamps

  • √【Material】Made of solid brass, high quality, can work in high temperatures and pressure..
  • √【Size】1/2"Barb x 1/2"Barb x 1/2"Barb, suitable for 1/2"ID tubing..
  • √【Quantity】1PCS 1/2" brass tee barbed fitting, 3PCS hose clamps..
  • √【Connetion】This 3 way splitter fitting can be connected to 3 tubings on all ends..
  • √【Usage】Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Wilkins 1/4' Male x 1/4' Female Test Cock TCS-14

  • 【Material】Brass material has corrosion resistance, high temperature ductility and low magnetic permeability. The handle is made of steel plated zinc and the most twist force is 12 LBS..
  • 【Wing Style】Winged style for easy to use with moisture drainage from tanks. External drain fitting for air and water service..
  • 【Perfect Replacement】To replace old or damaged drain cocks on compressor tanks. Brass Winged Tank Drain Cock is the perfect replacement for damaged or leaking drain cocks for pressure vessels on air compressors or air tanks..
  • 【Widely Applications】Suitable for use as an externally accessible drain in an air or water service application. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting and aviation..
Check Stock

GasOne 50200+2109 Gas ONE High Pressure Cast-Iron Round Burner Head with Brass Fitting O, Black

  • Includes - cast iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - cast iron will not melt easily compared to aluminum construction.
Check Stock

GasOne 50250+2109 Gas ONE High Pressure Cast-Iron Burner Head with Brass Fitting Orifice

  • Includes - Cast Iron high pressure burner head and 0-20 psi high Pressure regulator and 4 ft hose.
  • Universal replacement burner - With our gas one burner head, you can use it with high pressure or low pressure regulators (high pressure regulator is recommended for high output).
  • Brass fitting orifice Block - includes brass fitting orifice Block & air Shutter and spring.
  • Heat resistant - Cast Iron will not melt easily compared to aluminum construction.
  • Note: Image 3 accessories: Those parts come pre-installed for customer’s conveniences.
Check Stock