Reviews 3 Air Fitting

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

YOUHO Stucco Sprayer Mortar Sprayer Wall Plaster Sprayer Cement Mortar Sprayer Mortar Spray Gun Hopper Tool，with Compressor Connection kit 4 Jet Pneumatic

  • Package include: 1 x Sprayer Gun Tool. Quickly and easily apply stucco, mortar and plaster..
  • The cement sprayer is made of high-quality stainless steel, ensure structurally strong and lifetime anti-rust guarantee. It is lightweight and compact, so you can carry it with you..
  • Size: 30 x 7 x 7 inch. The end thread on the handle is 1/2" Male, and we provide with a 1/2" Female x 3/8" Hose Barb Fitting. If your tubing is not the 3/8" ID type. You can purchase a 1/2" Female x 【any size barb】 fitting which is suitable for your hose ID to connect with..
  • Easy Working: Cooperate with air compressor or air pump, saving time and material..
  • 4 Jet Stucco Sprayer Hopper Gun: It is equipped with 4 nozzles to match your work and air compressor, which is very useful for traditional plastering..
Check Stock

NQN 12 Foot 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge 0~60PSI Gas Flow Indicator, Gas Cooker 3/8inch Female Flare Fitting, Stainless Steel Braided Hose and Gas Grill LP Regulator

  • 【GardenNow Upgraded 12 FT 350 PSI high-pressure Propane extension Hose】This Propane Extension Hose upgrade to come with powerful 7 different couplings adapter fitting: 3/8" NPT Male x 3/8" NPT Male, 1/2" Female NPT x 3/8" Flare Male, 3/8" NPT Male x 3/8" Flare Male, 3/8" Flare Male x 3/8" Flare Male, 1/4" NPT Male x 3/8" Flare Male, 1/8" NPT Male x 3/8" Flare Male, 3/8" Brass Gas Ball Valve. These conversion connection extand the outdoor.
  • 【Premium Material】3/8" female flare fittings on both ends and 7 different types of adapters fittings kit of this 3/8" propane hose are made of 100% Solid Brass to ensure secure and durable for long-lasting to use. The 3/8” Female Flare propane hose is made of durable stainless steel braided with anti corrosion, anti-aging, air tightness, heat-resistance, flexibility features. This propane extension hose with CSA Certification, ensures air tightness and stability. High Pressure: 350 PSI..
  • 【Standard Fittings】This 3/8" Female Fitting x 3/8" Female Fitting Propane Hose comes with 7 different types of adapter adapters. Excellent 3/8" ....
Check Stock

Maxline M7580 Master Kit, 3/4-Inch x 300-Feet

  • of 3/4-Inch Tubing, (3) Air Outlet Kits, (2) Tee Fittings, 3/4-Inch Straight Fitting, (20) Pipe Clips, Debar and Cutter Tool.
  • 175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter.
  • Compression style nickel plated brass fittings.
  • maximum from the air compressor, up to 4000 sq..
Check Stock

150DB Super Loud Train Horns kit for Trucks, 4 Air Horn Trumpet for Car Truck Train Van Boat, with 120 PSI 12V Compressor and Gauge (Dark Black)

  • Compressor Size: 38 x 18 x 16 cm/ 15 x 7.1 x 6.3 inch.
  • Loud and Powerful - The 4 Trumpet Vehicle Air Horn Blares Out a Loud and Powerful Warning. The Trumpet Air Horn Compressor Kit will produce a powerful 150DB sound.
  • All In One - This kit includes a compressor that has a 1.59 gallon tank and pumps up to 120 psi. When the pressure drops to 90 psi, the compressor will kick on and pump back up to 120psi. And comes with 4 vibration pads to install under each leg when mounted, a 30 amp fuse, a petcock style tank moisture drain, and 3'ft of 3/8 inch air hose for the air horn hook-up that is to be used with the push lock fitting on the side of the air tank connecting to the push lock fitting on the air horn.
  • Suitable For - Equipped with a safety protection, which means if the compressor goes above 176 degree F it will automatically shut off and will start back up when it gets back down to 158 degree F,The Horns are Commonly Installed on Cars, Trucks, Vans,Tractors,Trains, Camper, RV’s, Off Road Vehicles etc. However it is also Extremely Suitable for Motorcycles or Boats.
  • Fast Delivery - Our products are all in US warehouse, you can get it in 3-8 days..
Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
  • Bulkhead Fitting Type: Push In Straight Male Connector.
  • Body:Nickel Plated Brass Seal, O-Ring NBR.
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
  • Fluid Admitted: Air, Vacuum, Water (No Freezing).
  • Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock

LEIMO KPARTS AC Diagnostic Manifold Gauge Set for Freon Charging, Fits R410A R22 R404 Refrigerants, 1/4' Thread Hose Set 60' with 2 Quick Coupler-r410a Manifold Gauge Set

  • AC A/C Manifold Gauge Set —- 3-way air conditioning diagnostic manifold gauge set for R404a, R410a, R22 refrigerants. Designed for AC charging, diagnostic check and recovery work.
  • Necessary tools for HVAC, car air condition maintenance and coolant or Freon adding.Widely used for household air conditioning units.
  •  Refrigerator, air conditioner and industrial refrigeration equipment..
  • Easy to operate and install, strong sealing for durability and safety.The solid brass gauge threaded connector and hose fitting is different from the brass plated construction, corrosion-resistant and rustless——ideal for professional auto mechanics. .
  • Freon Charging Hose 4000PSI Burst 800PSI Max W.P. each hose is approx. 5ft ( 60 inches / 152 cm) with 1/4″ SAE fitting——HIGH PRESSURE HOSES with ¼” SAE standard fittings using the highest technology rubber materials giving the hoses the most flexibility and reducing the risk of kinking.
  • Include 3-PC 5FT extra long Freon charging hose, 3 color for easily recognition, red for high pressure, blue for low pressure, yellow for refrigerant bottle –r410a manifold gauge set.
Check Stock

Air Venturi Foster Female to 1/8-Inch BSPP Male Quick-Disconnect Adapter, 5,000 PSI

  • QUICK-DISCONNECT ADAPTER: Add this foster female quick-disconnect adapter to your air-hose fittings to give your air guns more pressure and power! This adapter works with a variety of PCP air guns to keep you prepared for your shooting sessions..
  • VERSATILE ADAPTER: This air-fitting adapter has a universal-fitting design that lets you connect your air gun to this quick-disconnect piece. It works with a 1/8-inch BSPP male adapter and has a maximum pressure of 5,000 psi..
  • COMPACT PCP ADAPTER: Our adapter air fitting is compact enough that it won't get in your way when you need to refill your high-pressure air guns. Take this small adapter anywhere you go, and attach it to a variety of PCP guns whenever you need to!.
  • EASY TO USE: To begin using your quick-disconnect adapter, simply hook up your adapter to your PCP guns. It includes an easy-to-install flow restrictor, and it fills your air guns slowly while reducing the heat build-up in the cylinder..
  • AIR VENTURI: Since 2010, we've been an innovator in the air gun industry. Our quality equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check Stock

EBEST 10 FT Braided Airbrush Air Hose 1/8 -1/4 Adaptor fitting

  • 1.10' FT Braided Airbrush Air Hose 1/4"-1/8"Adaptor fitting.
  • 3.Used for connecting Airbrush to Air Compressor.
Check Stock

HQMPC RV Winterize Adapter Blowout Adapter 1/4

  • After sale service: If you have any questiosn fit our products, please contact service team, we will solve problems in time..
  • Easy operation quick adapter fitting, screw the water lines to the female or male threading side, then connect the quick plug to an air compressor line’s female quick coupler. Turn on the air compressor, rotate around ball valve’s stem to open/close and modulate the air flow velocity to blow out the water from the water lines..
  • Standard threading connector, 1/4″ quick connect air plug with 3/4″ GHT (male and female) Valve.
  • Products use:This Winterize Blowout Adapter Connected with air compressor to press out the hose line water aviod inside water blow out the water line in winter , irrigation systems, RV, travel trailer, boat, camper, cabins, faucets, garden hoses.
  • Packing Including: One Pcs 1/4″ Quick Connect Plug With 3/4″Female Valve,One Pcs 1/4″ Quick Connect Plug With 3/4″Male Valve, 4 Gaskets +1 Seal Tapes.
Check Stock