Reviews Brake Fluid Refill

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock

Phoenix Systems (2003-B) V-12 Reverse Brake & Clutch Bleeder Kit, Medium Duty One Person Bleeder, Hard Case

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

FOUR UNCLES 2L Vacuum Brake Bleeder Air Brake Bleeder Kit with 2L Brake Fluid Extractor and 1L Refilling Bottle

  • 【One Person Operation】This brake bleeder bleeds and flushes hydraulic brakes and clutches with a vacuum and is simple to use. Large capacity collection reservoir can contain 2 liters of fluid, also includes an automatic master cylinder refill kit with a 1 liter reservoir (safety cup), which makes changing brake oil easy and simple for one man operation..
  • 【2 Silicon Bleed Hoses】The brake oil bleeder kit includes a 40 inch silicone bleed hose with a universal rubber adapter that used with most standard and ABS brake systems, and a 40 inch master cylinder evacuation hose especially for bleeding brake in master cylinder..
  • 【Efficiently to Bleeding Work】It contains a variable thumb throttle which maintains average air flow rate 2 cfm and a desired brake fluid flow rate. And the fixing ring lock keeps extracting oil continuously, efficiently and quicker..
  • 【Quieter Work】 Built-in Integrated silencer allows the brake fluid to flow quietly through the silicone hose and makes a messy job cleaner, quicker and quieter..
  • 【Convenient & After Sales】Midget size of the N.W is less than 1 kg makes it easy and convenient to operate and carry even for women. And If there is some problem with our products while you receive it, pls feel free to contact us, ....
Check Stock

Mityvac MVA6852 1.5-Liter Manual Fluid Extractor/Dispenser - Master Cylinders Power Steering Coolant Reservoirs Transaxles and Diesel Fuel Filters

  • For extracting and dispensing fluids such as diesel fuel, motor oil, Brake fluid, transmission fluid, rear differential fluid, and coolant in vehicle....
  • Simple manual syringe-type action extracts or dispenses fluid quickly and cleanly..
  • Includes a 1.5 L capacity fluid extractor/dispenser and a rubber adapter connector. For use with MITYVAC ATF refill adapters..
  • Integrated valve and cap to prevent spills and leaks..
  • Perfect for fluid transfer applications in vehicle services, marine and general industry..
Check Stock

Mityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve

  • The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
  • An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
  • Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
  • pumping is only required to build additional pressure..
  • The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
  • For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..
Check Stock

Abilly Vacuum Brake Bleeder Air Brake Bleeder Kit with 2L Brake Fluid Extractor and 1L Refilling Bottle Pneumatic Vacuum Bleeder Tool Kit for Auto Car Truck Use

  • 【One-Time Filling】 Large capacity collection reservoir can contain 2 liters of fluid, also includes an automatic master cylinder refill kit with a....
  • 【One Man Operation】This brake bleeder bleeds and flushes hydraulic brakes and clutches with a vacuum and is simple to use. This is a pneumatic....
  • 【Efficient and Quiet to Bleeding Work】It contains a variable thumb throttle which maintains average air flow rate 2 cfm and a desired brake fluid....
  • 【What's Included】2L Vacuum Brake bleeder +1 L Refilling Bottle.The brake oil bleeder kit includes a silicone bleed hose with a universal rubber....
  • 【100% Satisfactory After-sales】Midget size of the N.W is less than 1 kg makes it easy and convenient to operate and carry. Also we supply 1 year....
Check Stock

ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen

  • Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid.
  • the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast..
  • LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid..
  • Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included).
  • Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately dur....
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

VXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators

  • ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
  • ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
  • ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
  • ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
  • ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock