Reviews Boring Bar Coolant Manifold

OTC Water Pump Holding Tool

  • ...tic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other damage..
  • A water tank pressure leak tester and vacuum purge fill tool kit is very helpful on troubleshooting, save money and time. If there is a small leak in cooling system, or if you add coolant without vacuum, can cause many problems or even a damaged engine, this kit is much cheaper than the maintenance cost or a new engine. And normally, the tools take about 10 minutes to test leak and 5-10 minutes to refill coolant. Simple operation and save time..
  • Thermometer uses stainless steel material, with scale range 0 - 200℃(32 - 400℉). Blue plastic case k....
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • ... air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability..
  • Normally, coolant pressure tester and refill kit takes about 10 mins to test leak and 5-10 mins to refill coolant. Simple time-saving operation. Also much cheaper than the maintenance cost or a new engine. Black blow-molded case makes for easy transportation, simple storage, and quick identification. This set is ideal for a variety of domestic and import vehicles. Suitable for Ford, Mercedes Benz, GM, Jeep, Oldsmobile, Pontiac, Buick, Chevrolet, Chrysler, Dodge, etc..
  • Thermometer uses stainless steel material, with scale range of 0 - 200℃(32 - 400℉). 21PCS color coded radiator adapters have the exact corresponding serial numbers and positions on the picture, and are equipped with detailed applicable models in instruction for easy reference. American and European style air plugs make it widely used on your existing air hose. And we ....
Check Stock

JIFETOR Radiator Coolant Pressure Tester Vacuum Refill Tool Kit, 28PCS Automotive Cooling System Leak Test and Pneumatic Purge Fill Set with Testing Adapter Caps Universal for Airlift Car Auto Truck

  • ...ap test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • COOLING SYSTEM VACUUM FILL TOOL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. 21" metal hook, 23" transparent bleeder hose and 60" refill hose are included..
  • COOLANT LEAK TEST AND THERMOMETER: Radiator coolant pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Stainless steel thermometer with index range 0 to 200℃ (32 to 400℉). American & European styles air plugs are included for you to choose. Customized blow molding case keeps everything in place and protects the gauges during storage.
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock

Dorman 615-188 Engine Intake Manifold Compatible with Select Ford Models

  • Ideal replacement - this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines.
  • Made in USA - designed, engineered and manufactured in the United States to deliver consistent quality and precise construction.
  • Proven design - features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance.
  • Complete kit - includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws.
Check Stock

JIFETOR Cooling System Vacuum Purge Radiator Coolant Refill Tool Kit, Universal Automotive Water Tank Pneumatic Vacuum Antifreeze Change Filler Set, with Adapter Case Hose for Car Van SUV Truck

  • ...test adapters and 2 connectors help to diagnose the leakage of radiator caps on most cars. All these adapters are color coded and placed exclusively, can be easily selected according to the marked pictures in instruction, convenient and no confusion..
  • WATER TANK COOLANT VACUUM REFILLER: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30 to 0inHg (-76 to 0cmHg), and normally -25 to -20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. 21" metal hook, 23" transparent bleeder hose and 60" refill hose are included..
  • HAND PUMP LEAK DETECTOR AND THERMOMETER: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Stainless steel thermometer with index range 0 to 200℃ (32 to 400℉). American & European styles air plugs are included for you to choose. Customized blow molding case keeps everything in place and protects the gauges during storage..
Check Stock

Sandvik Coromant A06M-SCLCL Round with Flats Shank Steel Boring Bar, 6\ Overall Length, 15/32\ Minimum Hole Diameter, 3/8\ Shank Diameter, 06 Insert Size (Pack of 1)

  • Bars for positive basic shape inserts 7 degree.
Check Stock

Accusize Industrial Tools 3/8'' by 4.33'' Right-Hand Sclcr Coolant Through Indexable Boring Bar with Ccmt Insert 21.51, 2800-0035

  • General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
  • The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
  • The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
  • Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
  • Extreme gloss finish, Bar hardness approximately 45HRC.
Check Stock

ACDelco GM Original Equipment 10-2006 RTV Engine Sealant - 75 g

  • Engineered for use on a variety of engine components – effective on: oil pan, ladder frame, front and rear covers, t-joints, manifold corners, intake, manifold end seals, and cam covers.
  • Designed for quick and easy application, assembly may be filled with oil or coolant immediately after applying sealant and torqueing the bolts.
  • High viscosity product that cures when exposed to air.
Check Stock

DNA Motoring OEM-ITM-001 Upper Intake Manifold 615-175[For 99-04 Ford Mustang 4.6L V8 SOHC]

  • 100% brand new, never been used/ one piece design.
  • Reinforced aluminum coolant Crossover - eliminates failure due to corrosion or vibration.
  • Intake gaskets molded into the intake manifold.
Check Stock