Reviews Body Impedance Meter

MESR-100 Capacitor Tester,Geevorks Circuit Tester Ohm Meter 0.001-100.0R with SMD Test Clip,Auto-Ranging Capacitor for Measuring Capacitance Resistance Circuit

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

Fluke TL75 Hard Point Test Lead Set

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Fluke 117/323 KIT Multimeter and Clamp Meter Combo Kit

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true-rms for accurate measurements on non-linear loads.
  • The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non-linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

ESI 585K Deluxe Automotive DMM

  • TWO YEAR WARRANTY vs ONE! In the Box: SP-8VM300A Meter, 300A Shunt, Wiring Kit, User Manual. USA tech support..
  • Multifunctional battery meter displays: Battery Voltage, Discharge Current, Discharge Power, Discharge Impedance, Internal Resistance, Capacity, SOC, Energy, Running Time.
  • Great for use with a solar charge controllers, inverters, automobiles, RV, vans, truck campers, boats, etc.
Check Stock

ART TPS II Tube Preamplifier System

  • Variable Input Impedance Newly enhanced V3 Variable Valve Voicing LED input meter.
  • Analog output meter Enhanced ART Tube Technology Automatically switches between instrument and mic preamp.
  • Wide frequency response (5hz-50kHz) Enhanced OPL Output Protection Limiter Toroidal transformer.
Check Stock

Switches Be Trippin Funny Master Electrician Fuse Box T-Shirt

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

MATRIX MCR-5030 Benchtop LCR Meter Precision Digital Lab Tester for apacitance Ground Insulation Resistance Inductance Accuracy 0.1% Test Measure Inspect Multimeter （100Hz-30kHz）

  • 【MATRIX LCR METER BENCHTOP】Precision digital lcr meter for labo voltage capacitor ground insulation resistance. It adopts 4.3-inch TFT LCD screen, 5-digit test resolution impedance meter instrument, multi-frequency points and 0.1% accuracy to meet the testing needs of various components and parameters..
  • 【TEST PARAMETER and TWO DIFFERENT SIGNAL SOURCES】L,C, R, lZl, D, Q , X , ESR,θ(Deg),θ(Rad).30Ω,100Ω two different signal source output impedance..
  • 【PRODUCT FEATURE】 Built-in comparator, 5-level sorting flexible pass and bad alarm mode. Shutdown automatically saves test conditions, user-friendly operation. Instrument software version, which can be upgraded through U disk. U disk screen copy, test data saving, support format FAT16, FAT32 file system. There are more than 100 sets of setting files inside, and U disk expansion can save or call multiple sets of test files..
  • 【THREE-YEAR WARRANTY AND QUALITY CHECK】Buy Precision Digital LCR, you will get 1* Benchtop LCR Meter, 1* Power Cord, 1* Four-terminal Test Cord, 1* CD, 1* Test Report, 1* User Manual, 1 * Fuse table. We will inspect all power supplies and accessories before shipping to ensure that every customer receives a quality product with a three-year warranty policy..
Check Stock

MATRIX MCR-5200 Benchtop LCR Meter Precision Digital Lab Tester for Apacitance Ground Insulation Resistance Inductance Accuracy 0.1% Test Measure Inspect Multimeter （40Hz-200kHz）

  • 【MATRIX LCR METER BENCHTOP】Precision digital lcr meter for labo voltage capacitor ground insulation resistance. It adopts 4.3-inch TFT LCD screen, 5-digit test resolution impedance meter instrument, multi-frequency points and 0.1% accuracy to meet the testing needs of various components and parameters..
  • 【TEST PARAMETER and TWO DIFFERENT SIGNAL SOURCES】L,C, R, lZl, D, Q , X , ESR,θ(Deg),θ(Rad).30Ω,100Ω two different signal source output impedance..
  • 【PRODUCT FEATURE】 Built-in comparator 5-level sorting flexible pass and bad alarm mode. Shutdown automatically saves test conditions, user-friendly operation. Instrument software version, which can be upgraded through U disk. U disk screen copy, test data saving, support format FAT16, FAT32 file system. There are more than 100 sets of setting files inside, and U disk expansion can save or call multiple sets of test files..
  • 【THREE-YEAR WARRANTY AND QUALITY CHECK】Buy Precision Digital LCR, you will get 1* Benchtop LCR Meter, 1* Power Cord, 1* Four-terminal Test Cord, 1* CD, 1* Test Report, 1* User Manual, 1 * Fuse table. We will inspect all power supplies and accessories before shipping to ensure that every customer receives a quality product with a three-year warranty policy..
Check Stock

Automotive Electrical and Electronics Systems and Components: Testing and Repairs: Use of multimeter for Automotive Electrical Diagnostics

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Digital Body Fat Analyzer Handheld Body Fat Tester Calorie BMI Measurement Digital Body Fat Loss Monitor with LCD Screen Body Fat Measuring Instrument for Weight Loss Fitness Mon

  • [Great Performance]: This handheld body fat analyzer can show basal metabolism that the number of calories necessary to maintain life, body fat percentage and body mass index, so you can get them at home at any time without going to the doctor or physical trainer.
  • [Intelligent Data Sorting]: The body fat calculator can store data for up to 9 definable users and their records can be recalled at any time when needed, after each test, the increment or decrease from the last recorded increment will be automatically displayed for comparison.
  • [Measuring Principle]: This body fat loss monitor is specially designed to measure the body fat rate by the human resistance impedance body and the corresponding body parameters (height, weight, age, gender).
  • [Fast Read Speed]: The handheld body fat test with the measurement results can be read about 7 seconds after the screen is displayed, It is very close to the water‑weight method that is used as a benchmark for measuring body fat.
  • [Easy to Use]: Our BMI meter is easy to use, you just need set the data, press the measurement button and hold the electrode handle with both hands to easily measure the body fat percentage.
Check Stock