Reviews Bmpcc 6k Battery Grip

Neewer D-Tap to BMPCC 4K/6K Coiled Power Cable Compatible with Blackmagic Pocket Cinema Camera 4K/6K Gold Mount V Mount Battery Weipu 2 Pin Female to P Tap, 16 inches - 50 inches Length

  • The D-Tap to BMPCC 4K/6K Weipu power cable is specifically compatible with Blackmagic Pocket Cinema Camera 4K/6K.
  • Connector Type: Connector 1: D-Tap. Connector 2: BMPCC 4K/6K Weipu SF6 2 Pin Female Plug.
  • Also fit for those using any V-mount or Gold mount battery with a D-tap plug.
  • Coiled cable for a flexible reach and neat setup. The cable length can stretch from 16 inches to 50 inches, allows your camera to connect the power more freely.
  • Every cable was tested to ensure that there is no short circuit, no potential breakdown problems before shipping. There is a key on the 2 pin connector, please match the key to plug in, please don't insert the 2 pin plug or d-tap connector inversely.
Check Stock

MAGICRIG Camera Cage Kit Compatible with BMPCC 6K Pro & 6K G2 for Blackmagic Pocket Cinema Camera 6K Pro & 6K G2

  • ...’ and 3/8'' thread holes and several ARRI-style mounts for mounting additional accessories, such as ball head, rod clamp, magic arm, handle, etc..
  • 【Full accessibility】The cage would not block any buttons on the camera and you are able to access not only the battery but even the audio slot, USB-port, HDMI-port..
  • 【Top Handle】This handle can be fixed on the top or side of the camera cage with 2pcs 1/4'' screws. This handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need..
  • 【T5 SSD Holder & Cable Clamp】The T5 holder is fixed to the cage by cold shoe, securing the T5 SSD and protecting the USB-C cable. The cable clamp attaches to the side of the cage with one 1/4”-20 screw, securing both the HDMI and USB-C cable by pushing the two sliding blocks..
Check Stock

[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203

  • Not for 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer.
  • 【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching.
  • 【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc.
  • 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting.
  • 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “Smal....
Check Stock

SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K - KCVB2419

  • 【ORIGINAL DESIGN】SMALLRIG Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K includes an integrated full cage, a top handle, and an SSD holder. The basic handheld kit for Blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K.
  • 【MOUNTING POINTS】SMALLRIG 2419 features multiple mounting points including NATO Rail, 1/4"-20 & 3/8"-16 Holes, Locating Holes for ARRI, and Cold Shoe Mount. The cage rig for BMPCC 4K & 6K is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches.
  • 【FOR HANDHELD SHOOTING】This Top Handle from SmallRig features a shoe mount for microphone and LED lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
  • 【Mount for Samsung T5 SSD】The SSD holder is fixed to the cage by....
Check Stock

Tiltaing Camera Cage for BMPCC 4K/6K Basic Kit | Tilta Gray | Compatible with Blackmagic Pocket Cinema Cameras | Top Handle, SSD Drive Holder, USB-C Cable, HDMI Adapter Included | TA-T01-B

  • This kit includes Full Camera Cage for BMPCC 4K/6K, SSD Drive Holder for Samsung T5, Quick Release Top Handle, 90-Degree USB-C Cable (20cm), and HDMI 90-Degree Adapter for BMPCC 4K.
  • Modular "Tiltaing" design allows you to mix and match parts to build the perfect rig.
  • Protects, adds handling options, SSD holder, and more.
Check Stock

Tiltaing Camera Cage for BMPCC 6K Pro Basic Kit TA-T11-B-B Blackmagic Pocket Cinema Camera Rig (Basic Kit Black)

  • ...an then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port..
  • [15MM ROD SUPPORT] When Using Battery Grip Extension Bracket.An included 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in the Half Cage setup..
Check Stock

Tiltaing Camera Cage for BMPCC 6K Pro Full Kit TA-T11-FCC-B Blackmagic Pocket Cinema Camera Rig (Full Kit Black)

  • [PROTECTIVE ARMOR] for BMPCC 6K Pro Minimizes Wear and Tear Over Time.
  • [MOUNT ACCESSORIES] via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins.
  • [HALF OR FULL] Detachable Design Allows More Flexibility in Different Shooting Situations.
  • [ARCA COMPATIBLE] Bottom Plate Allows for Quick Mounting to the DJI RS 2.
  • [BATTERY GRIP] Compatible via an Adjustable Bottom Plate.
Check Stock

SMALLRIG Lightweight Top Plate for BMPCC 4K & 6K - APT2510

  • 【FOR BMPCC 4K & 6K】SMALLRIG APT2510 is designed to mountarious accessories such as a monitor or top handle on your Blackmagic Design Pocket Cinema....
  • 【ANTI-TWIST】The multifunctional top plate for BMPCC 4K & 6K firmly mounts to the camera using a 1/4”-20 screw and features an anti-twist....
  • 【MOUNTING POINTS】The plate features a variety of mounting options including 1/4”-20 and 3/8”-16 holes, two locating holes for ARRI standard,....
  • 【SINGLE 15MM ROD CLAMP】The included 15mm rod clamp is detachable and can mount on several selected places, so you can use a seperately available....
  • 【BUILT IN NATO RAIL & COLD SHOE】The plate also includes a built-in NATO rail, two integrated shoe mounts for additional mounting options. An Allen....
Check Stock

IndiPRO V-Mount Battery Plate with 15mm Rod Mount & Coiled Cable for BMPCC 4K/6K/6K Pro (18-40")

  • Use the V-Mount Battery Plate with 15mm Rod Mount for BMPCC 4K/6K from IndiPRO Tools to power your Blackmagic Pocket Cinema Camera 4K or 6K with a longer-lasting V-mount battery.
  • It connects to the camera using a dedicated 2-pin connector at the end of a coiled cable. The cable measures 18" when fully contracted and extends to up to 40".
  • This coiled factor of the cable provides the flexibility to run the cable from one end of your rig to the other, while also letting you keep a neat connection if your power source is close to the camera.
Check Stock

Power Junkie by Blind Spot - Multi use NPF Battery Plate for filmmakers Using NP-F Batteries - Mirrorless or BMPCC Power - It s Also a npf Charger - Battery Plate with Industry Mount.

  • Power most DSLR/Mirrorless camera rigs plus BMPCC 4K / BMPCC 6K: Filmmaking is tough on your batteries, with the Power Junkie use Sony NP-F batteries....
  • Use three ports simultaneously: A 2.5mm DC port and 2x USB-A. Power your camera, a film light and another accessory all at the same time up to 28W.....
  • Charge and Sony NP-F battery: Input power for charging via USB C or USB Micro. USB power is available everywhere from your phone charger to your car....
  • Industry mounting: Using a 1/4" it can be mounted to any cage, a cold shoe also gives you the flexibility of mounting and un-mounting quickly. A zip....
  • LED power indicator: Have full visibility of your battery. Monitor how much power is left, when charging it also monitors how full the battery is..
Check Stock