Reviews Lens For Bmpcc 4k - BestBuyersPro.com

Tiltaing Camera Cage for BMPCC 4K/6K Basic Kit | Tilta Gray | Compatible with Blackmagic Pocket Cinema Cameras | Top Handle, SSD Drive Holder, USB-C Cable, HDMI Adapter Included | TA-T01-B

This kit includes Full Camera Cage for BMPCC 4K/6K, SSD Drive Holder for Samsung T5, Quick Release Top Handle, 90-Degree USB-C Cable (20cm), and HDMI 90-Degree Adapter for BMPCC 4K.
Modular "Tiltaing" design allows you to mix and match parts to build the perfect rig.
Protects, adds handling options, SSD holder, and more.

Not for 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer.
【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching.
【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc.
【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting.
【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “Smal....

The 12mm cine lens has a wide view angle of 92 degrees, great for landscape videography.
With a wide aperture of T2.2, the lens allows you to create shallow depth of view videos.
The lens structure is 10 groups 14 elements, makes the lens capable of producing sharp image and videos with low distortion.
Lens Not Attached:MANUAL LENS need you to enable"M mode" or "Release without lens" in the setting of camera, the lens is all metallic structure, makes....
Compatible with M43 mount cameras such as Olympus E-PL5 OMD-EM10, Panasonic Lumix GH5 GM5 and BMPCC 4K.

. There is a 1/4 threaded hole at bottom for rig attaching, and a stick for tripod connection..
. It helps to support 12V DC power input and extend battery life. This Adapter offers red led indicator to show power on..
. DV Battery Plate Adapter for BMPCC/BMCC/BMPC is a battery adapter which fits securely on the back of F970/F750/F550 battery on the rear of the....
. Compatible with: camera for BMPCC / BMCC 2.5K / BMPC 4K (F970/F750/F550 Battery).
. It gives users the ability to converting voltage to 12v easily and attaches camera battery normally used with camera for BMPCC/BMCC 2.5K/BMPC 4K..

【ORIGINAL DESIGN】SMALLRIG Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K includes an integrated full cage, a top handle, and an SSD holder. The basic handheld kit for Blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K.
【MOUNTING POINTS】SMALLRIG 2419 features multiple mounting points including NATO Rail, 1/4"-20 & 3/8"-16 Holes, Locating Holes for ARRI, and Cold Shoe Mount. The cage rig for BMPCC 4K & 6K is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches.
【FOR HANDHELD SHOOTING】This Top Handle from SmallRig features a shoe mount for microphone and LED lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
【Mount for Samsung T5 SSD】The SSD holder is fixed to the cage by....

【FOR BMPCC 4K & 6K】SMALLRIG APT2510 is designed to mountarious accessories such as a monitor or top handle on your Blackmagic Design Pocket Cinema....
【ANTI-TWIST】The multifunctional top plate for BMPCC 4K & 6K firmly mounts to the camera using a 1/4”-20 screw and features an anti-twist....
【MOUNTING POINTS】The plate features a variety of mounting options including 1/4”-20 and 3/8”-16 holes, two locating holes for ARRI standard,....
【SINGLE 15MM ROD CLAMP】The included 15mm rod clamp is detachable and can mount on several selected places, so you can use a seperately available....
【BUILT IN NATO RAIL & COLD SHOE】The plate also includes a built-in NATO rail, two integrated shoe mounts for additional mounting options. An Allen....

Full Camera Cage for BMPCC 4K - SSD Drive Holder for Samsung T5 - Quick Release Top Handle - 90-Degree USB-C Cable (20cm) - HDMI 90-Degree Adapter for BMPCC 4K - Titla 1 Year Warranty.

Compatible with Micro Four Third mount cameras such as BMPCC 4K Zcam E2 GH5.
Lens Not Attached : MANUAL LENS needs you to enable “M mode ” or “Release without lens” in the setting of camera.
The equivalent focal length is 32mm on Micro 4/3 mount camera bodies.
Delivery image withs smooth, circular bokeh and little to no focus breathing.
Lens consturction of 13 elements in 10 groups, capable of delivering sharp and clear video.

The D-Tap to BMPCC 4K/6K Weipu power cable is specifically compatible with Blackmagic Pocket Cinema Camera 4K/6K.
Connector Type: Connector 1: D-Tap. Connector 2: BMPCC 4K/6K Weipu SF6 2 Pin Female Plug.
Also fit for those using any V-mount or Gold mount battery with a D-tap plug.
Coiled cable for a flexible reach and neat setup. The cable length can stretch from 16 inches to 50 inches, allows your camera to connect the power more freely.
Every cable was tested to ensure that there is no short circuit, no potential breakdown problems before shipping. There is a key on the 2 pin connector, please match the key to plug in, please don't insert the 2 pin plug or d-tap connector inversely.

The Coiled D-Tap to BMPCC 4K Power Cable allows you to power your BMPCC 4K / 6Kfrom brick batteries and other D-Tap sources..
Measuring about 18' long coiled and 40" fully extended, it lets you keep a neater rig..
Plug A: 2 pin female. Plug B: Standard male D-Tap..
There is a key on the 2 pin connector, please match the key to plug in, please don't insert the 2 pin plug or d-tap connector inversely..
The 2 pin connector will automatically lock when you plug it in.It is impossible to pop off.But you can easily pull it out..