Reviews Big Block Chevy Engine Rebuild Kit

Racing Power Company R9729 Orange Drag Race Oil Pan for Big Block Chevy

  • Brand New Weiand Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1986-2002 Small Block Chevy Drag Racing Engines (Holley Part #5003WND).
  • Fits: 1986-2002 Small Block Chevy Drag Racing Engines | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly | Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit.
  • Specs: Application: 1986-2002 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Passenger | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.125" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....
Check Stock

NEW WEIAND OIL PAN KIT,7 QUARTS,GOLD ZINC,8.25" DEPTH,DRAG RACING,COMPATIBLE WITH 1958-1979 SMALL BLOCK CHEV.

  • Brand New Weiand Drag Racing Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1958-1979 Small Block Chevy Engines, Produced By Holley (Holley Part #5001WND).
  • Fits: 1958-1979 Small Block Chevy | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly.
  • Specs: Application: 1958-1979 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Driver | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.25" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

  • REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
  • GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
  • At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
  • FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
  • 58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....
Check Stock

Speedmaster PCE407.1007 4-Leg Engine Storage Cradle Stand with Casters

  • Red Powder-Coated Finish These Procomp Electronics engine stands are constructed from high-quality steel tubing, the mount brackets are 1/4 inch steel....
Check Stock

Big Block Chevy Pulley Kit 396 427 454 V-Belt - Long Water Pump

  • Chevy Big Block Pulley Kit, LWP, V-belt (396-427-454).
  • Made in the USA from 6061-T6 Billet Aluminum.
  • Designed for engines with Long Water Pump.
  • Give Your Engine the Strong American Made Pulleys that It Deserves!.
  • Includes single groove water pump, two groove crank, and single groove alternator pulley and cap.
Check Stock

Engine Down Live At Cat s Cradle 07/15/2004

  • Lightweight, compact design and and a terrific value for any budget.
  • Fits 1958 and newer small and big block Chevy engines (1955 to 1957 small block engines without side engine mounts do not fit this stand).
  • You can even leave the transmission attached.
  • Add the optional caster wheel set 91081139 to make it mobile.
  • 2-piece design for easy storage when not using to hold an engine.
Check Stock

Small Block Chevy Engine Storage Stand Cradle 750 lb Capacity

  • Engineered to fit small block and big block Chevy engines.
  • All four legs fold up for easy storage when stand is not in use.
  • Premium steel construction for superior strength and maximum hold.
  • Lightweight versatile design makes for easy engine mounting and installation.
  • Not compatible with 1955-1957 265 and 283 SBC engines since those engines do not have side engine mounts.
Check Stock

WEIAND FABRICATED OIL PAN KIT,7 QUARTS,GOLD ZINC FINISH,9" DEPTH,REAR SUMP,DRAG RACING,COMPATIBLE WITH 1979-1993 FORD MUSTANG 351W CONVERSION

  • ...een underneath. Weiand aluminum oil pans helped them get down the strip with 7-quart oil capacity and fins to keep them cool!.
  • Times and styles have changed, but Weiand is back and proud to announce their latest release of fabricated oil pan kits for Big Block Chevy, GM LS-engines, Small Block Ford & Mopar B/RB engine applications!.
  • Features: Oil Pan Kit comes complete with the following: application specific oil pan, oil pan gasket, oil pump pickup and pan mounting bolt kit | Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high perfomance engine oil systems fed properly | Gold Zinc Finish | Popular applications for drag race applications.
  • Specs: Application: 1979-1993 Mustang 351W | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: None | Emission Code: 5 | Finish: Gold Zinc Finish | Material: Stamped Steel | Oil Pan Capacity: 7.0 Quarts | Oil Pan Depth: 9.00" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
Check Stock

551497 BBC Power Steering Pump Bracket Adjustable Kit Replacement for Long Water Pump 454 and Big Block Chevy 396 402 409 427 454 502 V8 Eight Cylinder

  • 1. This kit is compatible with the Big Block Chevy engine of the long water pump (DWP-442).
  • 2. Compatible with power steering pump part number 36P1435.
  • 3. The kit must be used with long water pump and pulley.
  • 4.Fit for 1, 2 or 3 ribs and serpentine pulleys.
  • 5. Please confirm whether your model is suitable before buying.
Check Stock