Reviews Small Block Chevy Engine Rebuild Kit

NEW WEIAND OIL PAN KIT,7 QUARTS,GOLD ZINC,8.25" DEPTH,DRAG RACING,COMPATIBLE WITH 1958-1979 SMALL BLOCK CHEV.

Brand New Weiand Drag Racing Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1958-1979 Small Block Chevy Engines, Produced By Holley (Holley Part #5001WND).
Fits: 1958-1979 Small Block Chevy | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly.
Specs: Application: 1958-1979 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Driver | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.25" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
NOTE: Kit designed to work with standard volume oil pumps..

Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....

Breathe new life into your Small Block Chevy or Big Block Chevy engine with this easy-to-install fuel injection/distributor ignition kit.
Throttle body mounted ECU – no extra computers to mount or relocate.
Self tuning ECU means you don’t have to be a computer/tuning expert to enjoy EFI.
Precision machined shutter wheel designed for improved accuracy at extreme engine RPM.

REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....

Flat adjustable guide plates for Small Block Chevy and Small Block Ford applications.
For high performance Small Block Chevy and Small Block Ford engine applications.
Precision die-stamped and heat-treated steel material for a closer setting and improved durability.
Can be adjusted inward or outward for maximum convenience.

oil restrictors, allen head, aluminum, natural, dart shp block, small block chevy, pair.
oil restrictors for use in dart sb chevy shp blocks are specifically designed for the priority main oil system to reduce the amount of oil flow to the top of the engine, reducing the risk of evacuating the oil pan in continuous high rpm engines. kit includes two aluminum restrictors, an extra o-ring and detailed installation instructions..

【Compatibility】:Compatible With the SBC Engine.Compatible With Chevy Small Block SBC 265 267 283 302 305 307 327 350 383 400 Head Studs..
【Quality Standard】:Each cylinder head screw set is strictly manufactured to ensure zero defects-hardened and parallel ground washers are included with zero failures to ensure uniform load distribution and accurate torque readings..
【Forging Process】:The Cylinder Head Stud Kit are cold forged to ensure molecular integrity and heat treated before thread rolling and machining..
【Installation Suggestions】:Product installation involves the engine, the internal structure of the engine is complex, Professional Installation is Highly Recommended..
【Packing Include】:One set of Cylinder Head Stud Kit.As Shown in the Pictures.If you have any questions, please feel free to contact us, we will reply you within 24 hours..

Red Powder-Coated Finish These Procomp Electronics engine stands are constructed from high-quality steel tubing, the mount brackets are 1/4 inch steel....

Lightweight, compact design and and a terrific value for any budget.
Fits 1958 and newer small and big block Chevy engines (1955 to 1957 small block engines without side engine mounts do not fit this stand).
You can even leave the transmission attached.
Add the optional caster wheel set 91081139 to make it mobile.
2-piece design for easy storage when not using to hold an engine.

Compatible with Chevy Suburban for GMC Yukon with the block (peanut style) fittings 2000-2013.
Simply disconnect the rear lines and install kit in the engine compartment area..
Package Contents: 2 x A/C Block Off Kit (with bolts, nuts and washer as shown).